Philips FWD185/94 Operating manual

Use this simple and quick way to
watch your favourite DVD movie
and enjoy your Home Cinema
experience!
Helpful Hints
You only need to make one video connection to yourTV in
order to view the DVD playback.
If yourTV has S-Video or
Component (PR PB Y) video jacks,
use one of these video connections
instead for higher picture quality.
If yourTV has only a singleAntenna In jack,
you will need an accessory RF modulator. The RF
modulator converts the video from the DVD
system so it can play through theTV’sAntenna
connector.Refer to your owner’s manual for
proper connection.
When listening toTV programs, press AUX button on
the remote to set the DVD system toAUX mode in order
for the sound to be heard.
FWD185/94
FW
MW
AC 110-240V~50-60HZ
ANTENNA
ANTENNA
12 mm
Y
Please refer Owner’s Manual for more TV connection options.

Audio cable
( white , red )
MW loop
antenna
FM antenna
( T type)
( pig tail )
Remote control
AC power cable Composite vide
cable ( yellow )
Component vide cable
( red , blue , green )
Detailed playback features and additional functions are described in the
accompanying owner’s manual
Make sure your DVD system andTV are connected and turned on!
Plug & Play
1 Turn on the system.
“AUTO INSTALL PRESS PLAY” will be displayed.
2Press PLAY 2; on the system to start installation.
Playing a disc
3Press DISC on the remote control to select disc mode.
4Turn on theTV and select the correct Video In mode.
You should see the blue Philips DVD background screen on theTV (If no disc in the DVD
system).
5 Press OPEN0CLOSE on the front of the DVD system and load a disc, then
press the corresponding OPEN0CLOSE again to close the disc tray.
Make sure the disc label is facing up. For double-sided discs,load the side you want to play
face up.
6Playback will start automatically.
If a disc menu appears, use 1 /2 /5 /4 buttons on the remote to make the necessary
selection,then press OK to confirm. Or,use the Numeric Keypad on the remote to select
features. Follow the instructions given in the disc menu.
7To stop playback,press STOP 9.
Region Codes
DVDs must be labeled forALL regions or Region 5,
in order to play on this DVD system.
You should find the below accessories in the packaging box.
ALL
AV IN
??
5