Philips FWD185/98 Operating manual

Use this simple and quick way to
watch your favourite DVD movie
and enjoy your Home Cinema
experience!
Helpful Hints
You only need to make one video connection to your TV in
order to view the DVD playback.
If yourTV has S-Video or
Component (PR PB Y) video jacks,
use one of these video connections
instead for higher picture quality.
If yourTV has only a single Antenna In jack,
you will need an accessory RF modulator. The RF
modulator converts the video from the DVD
system so it can play through the TV’s Antenna
connector. Refer to your owner’s manual for
proper connection.
When listening to TV programs, press AUX button on
the remote to set the DVD system to AUX mode in order
for the sound to be heard.
FWD185/98
Please refer Owner’s Manual for more TV connection options.
FW
MW
AC 110-240V~50-60HZ
ANTENNAANTENNA
12 mm
Y
FWD185 QSG_Eng without DEMO 1/1/32, 3:55 AM1

Audio cable
( white , red )
MW loop
antenna
FM antenna
( T type)
( pig tail )
Remote control and
AAA sise batteries
AC power cable Composite vide
cable ( yellow )
Component vide cable
( red , blue , green )
Detailed playback features and additional functions are described in the
accompanying owner’s manual
Make sure your DVD system and TV are connected and turned on!
Plug & Play
1 Turn on the system.
“AUTO INSTALL PRESS PLAY” will be displayed.
2Press PLAY 2; on the system to start installation.
Playing a disc
3Press DISC on the remote control to select disc mode.
4Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD
system).
5 Press OPEN0CLOSE on the front of the DVD system and load a disc, then
press the corresponding OPEN0CLOSE again to close the disc tray.
Make sure the disc label is facing up. For double-sided discs, load the side you want to play
face up.
6Playback will start automatically.
If a disc menu appears, use 1 /2 /5 /4 buttons on the remote to make the necessary
selection, then press OK to confirm. Or, use the Numeric Keypad on the remote to select
features. Follow the instructions given in the disc menu.
7To stop playback, press STOP 9.
Region Codes
DVDs must be labeled for ALL regions or Region 3,
in order to play on this DVD system.
You should find the below accessories in the packaging box.
3
ALLALL
AV IN
??
FWD185 QSG_Eng without DEMO 1/1/32, 3:55 AM2