Philips FWM154/05 User manual

Quick start guide
Connect
Setup
Enjoy
EN
Mini Hi-Fi System
1
2
3
FWM154
Play disc
A
1Press DISC to select the disc source.
2Press OPEN/CLOSE on the front panel
to open the disc tray.
3Insert a disc with the printed side facing up,
then close the disc tray.
» Play starts automatically.
• To pause/resume play, press .
• To stop play, press .
To skip to a track, press• / .
To search within a track, press and•
hold / . Release to resume
normal play.
Enjoy
3
Program radio stations
automatically
B
1In tuner mode, press and hold
PROGRAM for 2 seconds to activate
automatic program mode.
» [AUTO] (auto) begins to blink.
» All available stations are programmed
in the order of waveband reception
strength.
D Note
You can program a maximum of 20 preset
radio stations.
»
The first programmed radio station is
broadcast automatically.
© Royal Philips Electronics N.V. 2009
All rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China
FWM154_05_QSG_V1.0
E Tip
Detailed features and additional functions are
described in the user manual.
FWM154_QSG_AEN_05_1.0.indd 2-3FWM154_QSG_AEN_05_1.0.indd 2-3 2009-4-23 14:30:372009-4-23 14:30:37

What’s in the box
1
2
Quick start guide
XXXXXX
Connect
Setup
2Enjoy
Eng
XXXXXXX
xxxxx
User Manual
Remote Control Quick start guideUser manual
Connect
1
Prepare the remote control
1Open the battery compartment.
2Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3Close the battery compartment.
A
MP3 link cable
3
1
2
D Note
• Before you press any function button on the remote
control, press a source button to select source with
the remote control.
Connect Speaker
B
D Note
• Ensure that the colors of the speaker wires
and terminals are matched.
1Connect the speaker wires to the matching
speaker terminals on the main unit.
E Tip
• See the User Manual for how to connect
other equipment to this system.
FMANT LOOP ANT
Speaker
(Right)
Speaker
(Left)
Connect
1
Setup
2
Set clock
A
1In standby mode, press and hold CLOCK.
» The hour digits are displayed and begin
to blink.
2Press / on the remote control to set
the hours.
3Press CLOCK.
» The minute digits are displayed and
begin to blink.
4Press / to set the minutes.
5Press CLOCK to confirm the time.
Connect power
C
1Connect the power cord to the wall outlet.
C Caution
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
• Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
E Tip
• During play, you can press DISPLAY on the
remote control to view the clock.
FWM154_QSG_AEN_05_1.0.indd 4-5FWM154_QSG_AEN_05_1.0.indd 4-5 2009-4-23 14:30:422009-4-23 14:30:42