Connect
1
Setup
2
Set clock
A
1In standby mode, press and hold CLOCK.
» The hour digits are displayed and begin
to blink.
2Press / on the remote control to set
the hours.
3Press CLOCK.
» The minute digits are displayed and
begin to blink.
4Press / to set the minutes.
5Press CLOCK to conrm the time.
Connect power
C
1Connect the power cord to the wall outlet.
C Caution
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
• Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
Play disc
A
1Press DISC to select the disc source.
2Press OPEN/CLOSE on the front panel
to open the disc tray.
3Insert a disc with the printed side facing up,
then close the disc tray.
» Play starts automatically.
• To pause/resume play, press .
• To stop play, press .
To skip to a track, press• / .
To search within a track, press and•
hold / . Release to resume
normal play.
Enjoy
3
© Royal Philips Electronics N.V. 2010
All rights reserved.
Specicationsaresubjecttochangewithoutnotice.
Trademarks are the property of Koninklijke Philips
ElectronicsN.V.ortheirrespectiveowners.
Printed in China FWM208_QSG_V1.0
Play from USB
B
1Connect the USB device into the socket.
2Press USB to select the USB source.
» Play starts automatically.
Program and listen to radio
stations
C
1In tuner mode, press and hold
PROGRAM for 2 seconds to activate
automatic program mode.
» [AUTO] (auto) begins to blink.
» All available stations are programmed
in the order of waveband reception
strength.
You can program a maximum of 20 preset
radio stations.
»
The first programmed radio station is
broadcast automatically.
• To pause/resume play, press .
• To stop play, press .
• To select an album, press ALBUM/
PRESET +/-.
To skip to a track, press• / .
To search within a track, press and•
hold / . Release to resume
normal play.
2Press ALBUM/PRESET +/- to select a
preset radio station.
