Philips MCB204/05 User manual

MCB204
What’s in the Box?
You should find these items upon opening the box.
Quick start guide
Remote Control
Pull out the plastic
protective sheet
before use.
1
Quick Start Guide
2
User Manual
Quick Start Guide User Manual
MCB204 QSG_Eng 4/17/07, 2:02 PM1

2
FM/DAB antenna
AUX
HEADPHONE
RIGHT LEFT
AC power adaptor
Speaker
(right)
Speaker
(left)
11
Tip
See the User Manual for how to
connect other equipment to this
system.
1
2
3
4
In standby or active mode, press CLOCK on the remote.
When the hour digits flash, press TUNING 4 ¢ on the front panel (or ¡ / ™on the
remote control) to set the hours.
Press CLOCK again and the minute digits flash.Then press TUNING 4 ¢ or ¡ / ™
again to set the minutes.
Press CLOCK again to confirm the time setting.
1
2
Connect the speaker cables.
Connect the power cord of the system..
Setting the clock
MCB204 QSG_Eng 4/17/07, 2:02 PM2

4
3
2
1
Playing a disc
Press SOURCE on the front panel to select CD or press DISC on the remote control.
Press OPEN/CLOSE çto open the CD compartment.
Insert a disc with the printed side facing up. Press OPEN/CLOSE çagain to close the
compartment.
Press ÉÅ to start playback.
To stop playback, press 9.
Tip
See the User Manual for detailed playback operations.
5
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD.
D
o
n
o
t
p
u
t
i
n
d
i
r
e
c
t
s
u
n
l
i
g
h
t
o
r
a
p
r
o
l
o
n
g
e
d
p
e
r
i
o
d
MCB204 QSG_Eng 4/17/07, 2:02 PM3

2
1
Tuning to DAB stations
Press SOURCE on the front panel to select DAB (or press DAB/FM on the remote
control) to start automatic search for available DAB stations.
Press and hold SCAN on the front panel (or SMART SCAN on the remote control)
to scan all band III frequencies.
At the completion of full scan, press S/Ton the front panel or press ¡ / ™on the
remote control to select your desired DAB channels.
Press ENTER/ÉÅ to confirm and tune to your selected channel.
Tips
–If the reception is poor, hang up one end of the T-shape FM/DAB antenna
and keep the other end at horizontal angle to it.
–See the User Manuals for detailed instructions on DAB operations.
4
PDCC-SY/ZC-0714
Programming and tuning to radio stations
1
2
3
Press SOURCE on the front panel repeatedly (or DAB/FM on the remote
control) to select the tuner source.
Press PROGRAM for more than two seconds to program all available stations.
Press ALBUM/PRESET 4or 3(or ¡ / ™on the remote control) until the
desired preset station is displayed.
Tip
Detailed playback features and additional functions are described
in the accompany owner's manual.
3
CRoyal Philips Electronics N.V. 2007
All rights reserved.
MCB204 QSG_Eng 4/17/07, 2:02 PM4