Philips MCB240 User manual

MCB240
What’s in the Box?
You should find these items upon opening the box.
Stand
Quick start guide
Remote Control Pull out the plastic
protective sheet
before use.
1
Quick Start Guide
3
Wall Mounting
2
User Manual
Quick Start Guide
Wall Mounting
2 x screw and plug
assembly
User Manual
MCB240 QSG_Eng 2005.8.3, 10:151
All manuals and user guides at all-guides.com
all-guides.com

1
2
To position the unit on a flat surface, slide the stand into the slot in the main unit as shown.
Connect the speaker wires to the Speakers terminals, right speaker to "R" and left speaker to "L", colored (marked)
wire to "+" and black (unmarked) wire to "–".
After ensuring all the above connections have been made, connect the AC power cord to the wall outlet.
2
3
T-shape Antenna
Speaker
(left)
Speaker
(right)
AC power cord
3
1
Tip
See Wall Mounting for detailed
instructions if you want to mount the
system on the wall.
MCB240 QSG_Eng 2005.8.3, 10:152
All manuals and user guides at all-guides.com

Setting the clock
1
2
3
The clock can be set in either 12-hour or 24-hour mode ("AM12:00" or "00:00", for example).
If the Eco power indicator is on, press and hold STANDBY-ON/ECO POWER (or B on the remote)
until "--:--" flashes on the display screen to switch to the normal standby mode.
Press and hold CLOCK SET until the clock digits for the hours flash.
Press PROGRAM on the set repeatedly to select the clock mode.
➜"AM12:00" or "00:00" is displayed with “AM12” or “00” flashing.
Press VOLUME (3/4) (+/-)to set the hours.
Press CLOCK SET again.
➜The clock digits for the minutes flash.
Press VOLUME (3/4) (+/-)to set the minutes.
Press CLOCK SET to confirm the time.
4
5
6
7
MCB240 QSG_Eng 2005.8.3, 10:153
All manuals and user guides at all-guides.com

Playing a disc
1
2
3
Press SOURCE on the front panel of the system to select
CD or press CD on the remote.
Press OPEN•CLOSE 0 to open the CD compartment.
Insert a disc with the printed side facing up. Press
OPEN•CLOSE 0 again to
close the compartment.
Press ÉÅ to start playback.
Tuning to DAB stations
1
2
3
Press SOURCE to select DAB (or press DAB on the remote) to start automatic
search for available DAB stations.
Press and hold SMART SCAN to scan all band III and band L frequencies.
Push TUNE1 / 2 once or more (or 4/ ¢on the remote) to scroll the list of stored stations and when your
desired station appears, press ENTER to select the station.
Press DAB MENU and then use the navigation control buttons for more features.
4
Tip
See the User Manual for detailed playback operations.
4
Tips
–If the reception is poor, hang up one end of the T-shape
antenna and keep the other end at horizontal angle to it.
–See the User Manuals for detailed instructions on DAB
operations.
GB
MCB240 QSG_Eng 2005.8.3, 10:154
All manuals and user guides at all-guides.com