Philips MCM166/12 User manual

Register your product and get support at
MCM166/12
EN User manual 3
DA Brugervejledning 23
DE Benutzerhandbuch 43
ES Manual del usuario 65
FR Mode d’emploi 87
IT Manuale utente 109
NL Gebruiksaanwijzing 129
SV Användarhandbok 151
MCM166_12_Book 1.indd Sec3:1MCM166_12_Book 1.indd Sec3:1 2008-08-15 4:45:13 PM2008-08-15 4:45:13 PM

3
English
EN
8 Receive radio 18
Tune to a radio station 18
Program radio stations automatically 18
Program radio stations manually 18
Select a preset radio station 18
9 Other features 19
Set the alarm timer 19
Set the sleep timer 19
Listen to an external device 19
10 Product information 20
Specifications 20
USB playability information 21
Supported MP3 disc formats 21
11 Troubleshooting 22
Contents
1 Important 4
Safety 4
Notice 5
2 Your micro hi-fisystem 7
Introduction 7
What’s in the box 7
Overview of the main unit 8
Overview of the remote control 9
3 Connect 11
Connect speakers 11
Connect power 11
4 Get started 12
Prepare the remote control 12
Auto install radio stations 12
Set clock 13
Turn on 13
5 Play disc/USB 14
Play disc 14
Play from USB 14
6 Play options 15
Skip to a track 15
Pause/resume play 15
Search within a track 15
Display play information 15
Repeat play 15
Random play 15
Program tracks 16
7 Adjust volume level and sound
effect 17
Adjust volume level 17
Select a preset sound effect 17
Enhance bass 17
Mute sound 17
MCM166_12_Book 1.indd Sec1:3MCM166_12_Book 1.indd Sec1:3 2008-08-15 4:45:15 PM2008-08-15 4:45:15 PM

4EN
k Only use attachments/accessories
specified by the manufacturer.
l Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
m Unplug this apparatus during lightning
storms or when unused for long periods
of time.
n Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
o Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not
used for a long time.
p Apparatus shall not be exposed to
dripping or splashing.
q Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
r This product may contain lead and
mercury. Disposal of these materials
•
•
•
1 Important
Safety
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
i For countries with a polarized mains,
do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other.A grounding
type plug has two blades and a third
grounding prong.The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
Caution:To prevent electric shock, match
the wide blade of the plug to the wide
slot, fully insert.
j Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
MCM166_12_Book 1.indd Sec1:4MCM166_12_Book 1.indd Sec1:4 2008-08-15 4:45:16 PM2008-08-15 4:45:16 PM

5
To establish a safe volume level:
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even at
normally ‘safe’ levels, can also cause hearing
loss.
Be sure to use your equipment reasonably
and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
Listen at reasonable volumes for
reasonable periods of time.
Be careful not to adjust the volume as your
hearing adapts.
Do not turn up the volume so high that
you can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a traffic
hazard and is illegal in many areas.
Notice
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC + 2006/95/EC
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
•
•
•
•
•
•
•
•
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
sWhere the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
Never remove the casing of this micro hi-fi.
Never lubricate any part of this micro hi-fi.
Never place this micro hi-fion other electrical
equipment.
Keep this micro hi-fiaway from direct sunlight, naked
flames or heat.
Never look into the laser beam inside the micro hi-fi.
Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect the micro hi-fifrom
the power.
•
•
•
•
•
•
Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
•
Hearing safety
Listen at a moderate volume.
Using headphones at a high volume can
impair your hearing.This product can
produce sounds in decibel ranges that may
cause hearing loss for a normal person,
even for exposure less than a minute.The
higher decibel ranges are offered for those
that may have already experienced some
hearing loss.
Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can actually be
loud and harmful to your hearing.To guard
against this, set your volume to a safe level
before your hearing adapts and leave it there.
•
•
English
EN
MCM166_12_Book 1.indd Sec1:5MCM166_12_Book 1.indd Sec1:5 2008-08-15 4:45:17 PM2008-08-15 4:45:17 PM

6
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Windows Media and the Windows logo
are trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This micro hi-fiincludes this label:
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products.The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
When you see the crossed-out wheel bin
symbol with the chemical symbol ‘Pb’, it means
that the batteries comply with the requirement
set by the directive for lead:
Please inform yourself about the local rules on
separate collection of batteries.The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
PbPb
EN
Norge
Typeskilt finnes på apparatens underside.
Observer: Nettbryteren er sekundert
innkoplet. Den innebygde netdelen er
derfor ikke frakoplet nettet så lenge
apparatet er tilsluttet nettkontakten.
For å redusere faren for brann eller
elektrisk støt, skal apparatet ikke utsettes
for regn eller fuktighet.
MCM166_12_Book 1.indd Sec1:6MCM166_12_Book 1.indd Sec1:6 2008-08-15 4:45:18 PM2008-08-15 4:45:18 PM

7
What’s in the box
Check and identify the contents of your
package:
Main unit
Loudspeaker boxes x 2
Remote control
•
•
•
2 Your micro hi-fi
system
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
at www.Philips.com/welcome.
Introduction
With this micro hi-fi, you can enjoy music from
audio discs and USB devices directly and other
external devices, or listen to radio stations.
The micro hi-fioffers you multiple sound effect
settings that enrich sound with Digital Sound
Control (DSC) and Dynamic Bass Boost (DBB).
The micro hi-fisupports the following media
formats:
English
EN
MCM166_12_Book 1.indd Sec1:7MCM166_12_Book 1.indd Sec1:7 2008-08-15 4:45:19 PM2008-08-15 4:45:19 PM

8
c PROG
Program tracks.
Program radio stations.
Select 12 hour or 24 hour format.
•
•
•
Overview of the main unit
a Display panel
Show current status.
b SOURCE
Select a source: Disc,TUNER, USB or
MP3 LINK.
•
•
EN
MCM166_12_Book 1.indd Sec1:8MCM166_12_Book 1.indd Sec1:8 2008-08-15 4:45:20 PM2008-08-15 4:45:20 PM

9
Overview of the remote
control
a POWER
Turn on the micro hi-fi, switch to
standby mode, or switch to Eco
Power Standby.
b Source selection keys (DISC, TUN,
USB,MP3 LINK)
Select a source: CD,TUNER, USB or
MP3 LINK.
c SLEEP
Set the sleep timer.
•
•
•
d CLOCK
Set the clock.
View the clock.
During play, select display information.
e
Stop play or erase a program.
f PRESET/ALBUM+/-
Select a preset radio station.
Skip to the previous/next album.
g /
Skip to the previous/next track.
Search within a track/ disc/USB.
Tune to a radio station.
Adjust time.
h MP3 LINK
Jack for an external audio device.
i VOLUME
Adjust volume.
j
Jack for a USB mass storage device.
k
Start or pause play.
l DBB
Turns on or off dynamic bass
enhancement.
m DSC
Select a preset sound setting: POP,
JAZZ, CLASSIC or ROCK.
n STANDBY-ON
Turn on the micro hi-fi, switch to
standby mode, or switch to Eco
Power Standby.
o OPEN/CLOSE
Open or close the disc tray.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
English
EN
MCM166_12_Book 1.indd Sec1:9MCM166_12_Book 1.indd Sec1:9 2008-08-15 4:45:21 PM2008-08-15 4:45:21 PM

10
p DSC
Select a preset sound setting: POP,
JAZZ, CLASSIC or ROCK.
q TIMER ON/OFF
Turn on or off alarm timer.
r REP ALL
Play all tracks repeatedly.
s REP
Play a track repeatedly.
•
•
•
•
d SHUF
Play tracks randomly.
e TIMER
Set the alarm timer.
f /
Search within a track/ disc/USB.
Tune to a radio station.
Adjust time.
g /
Skip to the previous/next track.
h DBB
Turns on or off dynamic bass
enhancement.
i
Stop play or erase a program.
j VOL +/-
Adjust volume.
k Numeric keypad
Select a track from a disc directly.
l CLOCK/DISPLAY
Set the clock.
View the clock.
During play, select display information.
m PROG
Program tracks.
Program radio stations.
Select 12 hour or 24 hour format.
n MUTE
Mute volume.
o ALB/PRESET+/-
Skip to the previous/next album.
Select a preset radio station.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
EN
MCM166_12_Book 1.indd Sec1:10MCM166_12_Book 1.indd Sec1:10 2008-08-15 4:45:23 PM2008-08-15 4:45:23 PM

11
Connect power
Caution
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the micro hi-fi.
Before connecting the AC power cord, ensure you have
completed all other connections.
•
•
1 Connect the AC power cord to the wall
socket.
3 Connect
Connect speakers
Note
Insert the stripped portion of each speaker wire into
the socket completely.
For optimal sound, use the supplied speakers only.
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
•
•
•
To insert each speaker wire: Hold down the
socket flap. Insert the speaker wire fully. Release
the socket flap.
1 For the right speaker, find the sockets on
the main unit marked ‘RIGHT’.
2 Insert the red wire to the red (+) socket.
3 Insert the black wire into the black (-)
socket.
4 For the left speaker, find the sockets on the
main unit marked ‘LEFT’.
5 Repeat steps 2-3.
12 12
English
EN
MCM166_12_Book 1.indd Sec1:11MCM166_12_Book 1.indd Sec1:11 2008-08-15 4:45:23 PM2008-08-15 4:45:23 PM

12
Note
Before pressing any function button on the remote
control, first select the correct source with the remote
control instead of the main unit.
If you are not going to use the remote control for a
long time, remove the battery.
•
•
Auto install radio stations
When you connect the micro hi-fito the
power supply for the first time, or no radio
station is stored in this micro hi-fi, Plug and Play
is activated to store all available radio stations
automatically.
1 Connect the micro hi-fito the power
supply.
[AUTO INSTALL - PRESS PLAY] (auto
install - press the PLAY button) is
displayed.
2 Press on the main unit to start
installation.
[AUTO] (auto) is displayed.
The micro hi-fiautomatically store
radio stations with sufficient signal
strength.
When all the available radio stations
are stored, the first preset radio station
is broadcast automatically.
»
»
»
»
4 Get started
Caution
Use the controls only as stated in this user manual.•
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your micro hi-fi.
The model number and serial number are on
the back of your micro hi-fi.Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
For first-time use:
1 Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
EN
3
1
2
MCM166_12_Book 1.indd Sec1:12MCM166_12_Book 1.indd Sec1:12 2008-08-15 4:45:25 PM2008-08-15 4:45:25 PM

13
Turn on
1 Press POWER.
The micro hi-fiswitches to the last
selected source.
Switch to standby
1 Press POWER to switch the micro hi-fito
standby mode.
The backlight on the display panel is
reduced.
The clock (if set) appears on the
display panel.
To switch the micro hi-fito Eco Power
Standby mode:
1 In the standby mode, press and hold
POWER for more than 2 seconds.
The backlight on the display panel
turns off.
»
»
»
»
Set clock
1 In the standby mode,press and hold
CLOCK/DISPLAY to activate the clock
setting mode.
The 12 hour or 24 hour format is
displayed.
2 Press PROG repeatedly to select 12 hour
or 24 hour format.
3 Press CLOCK/DISPLAY to confirm.
The hour digits are displayed and begin
to blink.
4 Press / to set the hour.
5 Press CLOCK/DISPLAY to confirm.
The minute digits are displayed and
begin to blink.
6 Press / to set the minute.
7 Press CLOCK/DISPLAY to confirm.
Tip
To view the clock during play, press CLOCK/DISPLAY
repeatedly until the clock is displayed.
•
»
»
»
English
EN
MCM166_12_Book 1.indd Sec1:13MCM166_12_Book 1.indd Sec1:13 2008-08-15 4:45:26 PM2008-08-15 4:45:26 PM

14
1 Insert the USB plug of a USB device into
the socket.
2 Press USB to select the USB source.
The total number of tracks is displayed.
3 Press ALB/PRESET+/- to select a folder.
4 Press / to select a file.
5 Press to start play.
»
5 Play disc/USB
Play disc
1 Press DISC to select the disc source.
2 Press OPEN/CLOSE on the top panel to
open the disc tray.
3 Insert a disc with the printed side facing up,
then close the disc tray.
4 Press to start play.
Play from USB
Note
Ensure that the USB device contains playable audio
contents for supported formats (see ‘USB playability
information’ on page 20).
•
EN
MCM166_12_Book 1.indd Sec1:14MCM166_12_Book 1.indd Sec1:14 2008-08-15 4:45:26 PM2008-08-15 4:45:26 PM

15
Repeat play
Play a track repeatedly
1 During play, press REP.
[REP] (repeat) is displayed: the current
track is played repeatedly.
2 To return to normal play, press REP again.
Play all tracks or an album repeatedly
1 During play, press REP ALL repeatedly to
select:
[REP ALL] (repeat all) is displayed: all
tracks are played repeatedly.
[REP ALB] (repeat album) is displayed
(for MP3 and USB only): the current
album is played repeatedly.
2 To return to normal play, press REP ALL
repeatedly until repeat mode is no longer
displayed.
Random play
1 Press SHUF.
[SHUF] (shuffle) is displayed: all tracks
are played randomly.
2 To return to normal play, press SHUF again.
Tip
The repeat and shuffle functions cannot be activated at
the same time.
•
»
»
»
»
6 Play options
Skip to a track
For CD:
1 Press / to select another track.
To select a track directly, you can also
press a key on the numerical keypad.
For MP3 disc and USB:
1 Press ALB/PRESET+/- to select an album
or folder.
2 Press / to select select a track or file.
Pause/resume play
1 During play, press to pause/resume
play.
Search within a track
1 During play, press and hold / .
2 Release to resume normal play.
Display play information
1 During play, press CLOCK/DISPLAY
repeatedly to select different play
information.
•
English
EN
MCM166_12_Book 1.indd Sec1:15MCM166_12_Book 1.indd Sec1:15 2008-08-15 4:45:28 PM2008-08-15 4:45:28 PM

16
Program tracks
You can program a maximum of 40 tracks.
1 At CD/USB mode, in the stop position,
press PROG to activate the program
mode.
[PROG] (program) blinks on the
display.
2 For MP3/WMA tracks, press ALB/
PRESET+/- to select an album.
3 Press / to select a track number, then
press PROG to confirm.
4 Repeat steps 2 to 3 to select and store all
tracks to program.
5 Press to play the programmed tracks.
During play, [PROG] (program) is
displayed.
To erase the program, in the stop
position, press .
»
»
•
EN
MCM166_12_Book 1.indd Sec1:16MCM166_12_Book 1.indd Sec1:16 2008-08-15 4:45:29 PM2008-08-15 4:45:29 PM

17
Enhance bass
1 During play, press DBB to turn or or off
dynamic bass enhancement.
If DBB is activated, DBB is displayed.
Mute sound
1 During play, press MUTE to mute/unmute
sound.
»
7 Adjust volume
level and sound
effect
Adjust volume level
1 During play, press VOL +/- to increase/
decrease the volume level.
Select a preset sound effect
1 During play, press DSC repeatedly to
select:
[POP] (pop)
[JAZZ] (jazz)
[CLASSIC] (classic)
[ROCK] (rock)
•
•
•
•
English
EN
MCM166_12_Book 1.indd Sec1:17MCM166_12_Book 1.indd Sec1:17 2008-08-15 4:45:29 PM2008-08-15 4:45:29 PM

18
Program radio stations
manually
Note
You can program a maximum of 40 preset radio
stations.
•
1 Tune to a radio station.
2 Press PROG to activate program mode.
[PROG] (program) blinks on the
display.
3 Press ALB/PRESET+/- to allocate a
number (1 to 40) to this radio station, then
press PROG to confirm.
The preset number and the frequency
of the preset station are displayed.
4 Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store another
station in its place.
•
Select a preset radio station
1 Press ALB/PRESET+/- to select a preset
number.
Tip
FM antenna is fixed to the main unit.
Position the antenna as far as possible fromTV,VCR or
other radiation source.
For optimal reception, fully extend and adjust the
position of the antenna.
•
•
•
»
»
8 Receive radio
Tune to a radio station
1 Press TUN repeatedly to select FM or
MW.
2 Press and hold / for more than 2
seconds.
[SEARCH] (search) is displayed.
The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station, press /
repeatedly until you find optimal
reception.
Program radio stations
automatically
Note
You can program a maximum of 40 preset radio
stations.
•
1 In the tuner mode, press and hold PROG
for 2 seconds to activate automatic
program mode.
[AUTO] (auto) is displayed.
All available stations are programmed
in the order of waveband reception
strength.
The first programmed radio station is
broadcast automatically.
»
»
•
»
»
»
EN
MCM166_12_Book 1.indd Sec1:18MCM166_12_Book 1.indd Sec1:18 2008-08-15 4:45:30 PM2008-08-15 4:45:30 PM

19
Set the sleep timer
This micro hi-fican switch to standby
automatically after a set period of time.
1 When the micro hi-fiis turned on, press
SLEEP repeatedly to select a set period of
time (in minutes).
When sleep timer is activated, the
display shows .
To deactivate sleep timer
1 Press SLEEP repeatedly until “0” is
displayed.
When sleep timer is deactivated,
disappears on the display.
Listen to an external device
You can listen to an MP3 player through this
micro hi-fi.
1 Press MP3 LINK to select AUX source.
2 Use an AUX cable (not supplied) to
connect MP3 LINK jack (3.5mm) on this
micro hi-fiand the headphone jack on an
MP3 player.
»
»
9 Other features
Set the alarm timer
This micro hi-fican be used as an alarm clock.
The DISC,TUNER or USB is activated to play
at a preset time.
1 Ensure that you have set the clock
correctly.
2 In the standby mode,press and hold
TIMER.
3 Press DISC , TUN or USB to select a
source.
4 Press TIMER to confirm.
The hour digits are displayed and begin
to blink.
5 Press / to set the hour.
6 Press TIMER to confirm.
The minute digits are displayed and
begin to blink.
7 Press / to set the minute.
8 Press TIMER to confirm.
The timer is set and activated.
Activate and deactivate alarm timer
1 Press TIMER ON/OFF repeatedly to
activate or deactivate timer.
If timer is activated, the display shows
.
If timer is deactivated, disappears on
the display.
Note
Alarm timer is not available in MP3 LINK mode.
If DISC/USB source is selected and the track cannot be
played, tuner is activated automatically.
•
•
»
»
»
»
»
English
EN
MCM166_12_Book 1.indd Sec1:19MCM166_12_Book 1.indd Sec1:19 2008-08-15 4:45:31 PM2008-08-15 4:45:31 PM

20
Tuner
Tuning Range FM: 87.5 - 108MHz;
MW: 531 - 1602kHz
Tuning grid 50KHz
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
<22 dBf
>43 dBf
Search Selectivity >28dBf
Total Harmonic Distortion <3%
Signal to Noise Ratio >55dB
Speakers
Speaker Impedance 4ohm
Speaker Driver 3.5”woofer+0.8” tweeter
Sensitivity >82dB/m/W
General information
AC power 220 - 230V, 50Hz
Operation Power
Consumption
20W
Standby Power
Consumption
<4W
Eco Standby Power
Consumption
<2W
USB Direct Version 2.0/1.1
Dimensions
- Main Unit (W x H x D)
- Speaker Box (W x H x D)
209 x231 x 147mm
146 x 228 x 160mm
Weight
- With Packing
- Main Unit
- Speaker Box
6.6 kg
1.95 kg
2 x 1.2 kg
10 Product
information
Note
Product information is subject to change without prior
notice.
•
Specifications
Amplifier
Rated Output Power 2X5W RMS
Frequency Response 60 - 16kHz, ±3dB
Signal to Noise Ratio >65dB
Aux Input 0.5V RMS 20kohm
Disc
LaserType Semiconductor
Disc Diameter 12cm/8cm
Support Disc CD-DA, CD-R, CD-RW,
MP3-CD,WMA-CD
Audio DAC 24Bits / 44.1kHz
Total Harmonic
Distortion
<1%
Frequency
Response
60Hz -16kHz (44.1kHz)
S/N Ratio >65dBA
EN
MCM166_12_Book 1.indd Sec1:20MCM166_12_Book 1.indd Sec1:20 2008-08-15 4:45:32 PM2008-08-15 4:45:32 PM

21
Supported MP3 disc formats
ISO9660, Joliet
Maximum title number: 512 (depending on
file name length)
Maximum album number: 255
Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
Supported Bit-rates: 32~256 (kbps),
variable bit rates
•
•
•
•
•
USB playability information
Compatible USB devices:
USB flash memory (USB 2.0 or USB1.1)
USB flash players (USB 2.0 or USB1.1)
memory cards (requires an additional card
reader to work with this micro hi-fi)
Supported formats:
USB or memory file format FAT12, FAT16,
FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
WMA v9 or earlier
Directory nesting up to a maximum of 8
levels
Number of albums/ folders: maximum 99
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
is not be shown in the display.
Unsupported file formats are skipped. For
example,Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
AAC,WAV, PCM audio files
DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
WMA files in Lossless format
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
English
EN
MCM166_12_Book 1.indd Sec1:21MCM166_12_Book 1.indd Sec1:21 2008-08-15 4:45:33 PM2008-08-15 4:45:33 PM