Philips MCM704D/37B User manual

MCM704D
What’s in the Box?
You should find these items upon opening the box.
FM antenna
AM antenna
Quick start guide
Remote Control
Pull out the plastic
protective sheet
before use.
1
Quick Start Guide
2
User Manual
1X Docking cradle
8 X iPod dock adaptors
Control cable
User Manual
Quick Start Guide
Docking cable
MCM704D QSG_Eng 2007.4.7, 14:561

3
1
25
4
Connect the speaker cables.
Connect the FM and AM antennas.
Connect the control cable.
Connect the docking cradle.
Connect the power cord of the system.
iPod portable player
Docking cradle
Docking cable
Speaker
(right)
Speaker
(left)
FM antenna
AM antenna
AC power cord
Tip
See the User Manual for how to
connect other equipment to this
system.
1
2
3
4
5
MCM704D QSG_Eng 2007.4.7, 14:562

1
2
3
4
In standby mode, press and hold CLOCK on the remote.
When the hour digits flash, turn VOLUME-/+ on the system or press VOL+/- on the
remote to set the hours.
Press CLOCK again and the minute digits flash.Then turn VOLUME-/+ on the system or
press VOL+/- on the remote to set the minutes.
Press CLOCK again to confirm the time setting.
Setting the clock
IMPORTANT!
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON
2 on the set for 3
seconds or more to switch to normal standby mode first before proceeding with the procedures below.
4
3
2
1
Playing a disc
Press SOURCE on the top of the system to select DISC or press
CD on the remote.
Press çto open the CD compartment.
Insert a disc with the printed side facing up. Press çagain to close
the compartment.
Playback will start automatically.
To stop playback, press 9.
5
MCM704D QSG_Eng 2007.4.7, 14:563

PDCC-JS/JW-0714
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
Playing Apple iPod using MCM704D
1
2
3
Select the correct dock adaptor, as indicated on each adaptor, then fit it in
the dock.
Correctly place the compatible iPod player into the dock.
Press SOURCE on the system repeatedly or iPod on the remote control
to select the iPod source.
Power on your iPod player.
Select and play your favourite songs stored in the iPod player.
4
5
MCM704D QSG_Eng 2007.4.7, 14:564