Philips Theatre Director SPP4200WA/17 Supplement

Owner’s Manual & Warranty
Models SPP4200WA/17 / SPP4210WA/17 / SPP4220WA/17

1
Introduction
Thank you for choosing Philips model SPP4200 / SPP4210 / SPP4220 Theatre DirectorTM Advanced
Surge Protector. With Theatre Director, the home theater surge protector is moved o the oor
behind the A/V cabinet up to the shelf or rack that holds all of the other components. This provides
theultimateinconveniencewhenconnecting all of the components. Inadditiontotheconvenience,
Theatre Director is also technologically superior to standard surge protectors. With features such
as our proprietary s-OV Technology, V3TM Advanced Surge Protection and ClearConnect Power
Conditioning,Theatre Director truly takes home theater surge protection to a whole new level.
Please read and save this manual. It contains important information with regard to the proper
installation and maintenance of the surge protector system. Failure to follow all instructions and
warnings could result in damage to the surge protector or connected equipment and void the
warranty.
Should you have any questions regarding the use of this product, please contact our customer
service department at 800-852-4312.
Included Items
Model SPP4200 SPP4210 SPP4220
6ft. RG6 Coaxial Cable 1 1 1
6ft. RJ45 Network Cable n/a 1 1
6ft. RJ11 Modem/Phone Cable 1 1 1
Rack-mount Brackets 1 pair 1 pair 1 pair
Features
s-OV Technology
Philips’ s-OV (Smart Over-voltage) technology is a new, proprietary (patent pending) method of
surge protection that is designed to protect connected equipment from catastrophic over-voltage
events, such as lightning strikes, faulty wiring, etc.
Throughaseriesofrelays,whenanover-voltageeventoccurs,thepowertoallconnectedequipment
iscompletelydisconnectedpreventinganypossibledamage totheequipment. Whennormalpower
is restored, Theatre Director’s intelligent processor automatically resets itself for normal operation
and equipment protection.
In addition to disconnecting power to all connected equipment, s-OV technology also prevents
damaging voltage from passing through to the MOVs, which are there to protect your valuable
equipment from everyday transient surges and spikes.

2
V3TM Technology
For the more common everyday transient surges and spikes that are most commonly caused by
household appliances turning on and o, Theatre Director uses an advanced type of MOV (metal
oxide varistor). This new type of MOV provides greater capacity to absorb surges and spikes, as well
as better energy dissipation. The result is a more ecient, longer lasting surge protector.
Clear Connect Power Conditioning
The electrical current running through your home is lled with impurities referred to as
electromagnetic interference (EMI) and radio frequency interference (RFI), which are caused by
household appliances and electronics. If left alone, these impurities can show up in your home
theater system in the form of picture or sound distortion and degradation. Our Clear Connect power
conditioning technology puries the electrical current before it reaches your sensitive components.
This ltering process reduces EMI and RFI noise by up to 85 decibels (dB), among the highest level of
noise ltration available today, keeping your equipment safe, picture sharp and sound crisp.
Always-on AC Outlets
Each model of Theatre Director is equipped with two AC outlets that are always on – regardless
of the position of the main power switch. These outlets are useful for components that require a
constant source of power to maintain programmed settings, such as a VCR, DVR, TiVoTM, etc. While
these outlets are not controlled by the main power switch, they are still protected by s-OV and V3
technologies.
Switched AC Outlets
The remaining AC outlets (number varies by model) are powered on and o with the main power
switch on the front panel. All components connected to these outlets can be powered on and o at
the same time by simply pressing the main power switch on the front panel.
Coaxial Cable Protection
Depending on the model,Theatre Director includes either 2, 3 or 4 sets (see feature chart page 4) of
gold-plated coaxial cable protection. These connectors are useful protecting components that have
incoming coaxial cables connected to them, such as satellite dishes, cable boxes, antennas, etc.
RJ45 Networking Protection
Should your home theater system incorporate incoming RJ45 networking cables, such as a media
server or HDTV monitor with broadband web access, Theatre Director’s RJ45 protection will keep
the connected equipment safe from surges that can potentially enter through the incoming RJ45
network cable (not available on model SPP4200).

3
RJ11 Modem/Phone Line Protection
As with incoming coaxial or RJ45 networking lines, surges can also enter your system through
standard RJ11 phone lines. Some A/V components, such as digital satellite receivers, DVRs, TiVoTM,
etc., require connection to a phone line. Theatre Director will protect your equipment from surges
comingthroughthislinetoo. Inaddition,shouldyoursystemincorporatemorethanonecomponent
that requires a phone line connection, we included a 1-in / 2-out phone line splitter.
Grounding Lug
The grounding lug provides a common grounding point for components with separate ground
leads, such as turntables.
Resettable Circuit Breaker
To prevent Theatre Director from possible overload damage, we have included a resettable circuit
protector. The circuit breaker will only trip if the total current draw of all connected equipment
exceeds 15 amps. Should this occur, the unit is most likely overloaded. Please unplug at least one
component fromTheatre Director before resetting the circuit breaker.
Rack-mount Brackets
The included adjustable rack-mount brackets will allow you to mount Theatre Director into an A/V
rack system should you desire to do so. To adjust the depth of the front panel in the rack system,
simply align the rack-mount bracket holes on the side panels ofTheatre Director’s cabinet with the
corresponding holes on the brackets. Be sure to tighten the screws securely to prevent unexpected
movement.
8ft. Power Cord with Right-angle Plug and O-set Cord
The extra long 8ft. power cord allows you to place Theatre Director in the most convenient location
possible – right next to the components it has been designed to protect. This also allows the use of
shorter coaxial, RJ45 and RJ11 cables to connect your components, which reduces cluttered cables.
The right-angle plug allows you to place your home theater system cabinet closer to the wall than
standard surge protectors will allow.
The o-set cord allows you to plug Theatre Director into the top outlet of a two-outlet receptacle
without blocking the lower outlet.

4
Feature Chart
Model SPP4200 SPP4210 SPP4220
s-OVTechnology √ √ √
V3TM Technology √ √ √
ClearConnect Technology √ √ √
Always-on AC Outlets 2 2 2
Switched AC Outlets 6 8 10
Total AC Outlets 8 10 12
Coaxial Cable Protection 2 sets 3 sets 4 sets
RJ45 Network Protection n/a √ √
RJ11 Modem/Phone Protection √ √ √
Grounding Lug √ √ √
Resettable Circuit Breaker √ √ √

5
Front Panel Indicators
A series of intelligent LED indicators on the front panel ofTheatre Director keep you informed of the
power status at all times. The red light lets you know that the surge protection function is ready
in the event it is needed. The green light lets you know that your electrical system is wired and
grounded properly. The range of blue lights let you know what your current input voltage level is.
The main power switch, also located on the front panel, turns power on and o to all switched AC
outlets. This single switch can be used to conveniently power on and o all components plugged
into the switched outlets with the touch of one button.
Connecting Your Equipment
1. Place Theatre Director in the desired location of your home theater system. Attach the rack-
mount brackets, if desired, as described in the “Rack-mount Brackets”section of the Features
above.
2. Plug the A/V components – that do not require a constant power source – into the switched
AC outlets. These components can be powered on and o simultaneously with the main power
switch on the front panel ofTheatre Director.
3. Plug the A/V components that do require a constant power source (i.e., VCR, DVR, TiVoTM, etc.)
into the always-on AC outlets. Power to these components will not be controlled by the main
power switch on the front panel ofTheatre Director.
4. As needed, connect the incoming coaxial, RJ45 networking and RJ11 phone lines to the
corresponding IN jacks.
5. Connect additional coaxial, RJ45 networking and RJ11 phone line cables from the OUT jacks on
Theatre Director to the corresponding inputs on the A/V components.
6. Plug the main power cord into a standard 110V AC outlet.
7. Press the main power switch on the front panel – the switch will illuminate blue when power
is on.
8. Operate the home theater system per the instructions supplied with the components.

6
Specications
Model SPP4200 SPP4210 SPP4220
Maximum InputVoltage (VAC) 125
Nominal Input Frequency (Hz) 60
Maximum Output Power (Watts) 1875
Maximum Line Current (Amps) 15
AC Line ClampingVoltage 330
Energy Dissipation (Joules) 4320 5400 6480
EMI/RFI Noise Filtering (dB) 85
MaximumTransient Current (Amps; all lines) 288,000 360,000 432,000
Transient ResponseTime (nanoseconds) <1 <1 <1
Power Cord Length 8ft.
Coax ClampingVoltage 75
Coax Attenuation <1.0dB to 2.5 GHz
Phone (RJ11) ClampingVoltage 395
Network (RJ45) ClampingVoltage n/a 8
Unit Dimensions
(W x D x H; inches)
16.96 x 14.76
x 1.73 16.96 x 14.76 x 3.46
UnitWeight (pounds) 10.78 13.77 13.99
Product Warranty Period 5-years
Connected EquipmentWarranty $500,000 $750,000 $1,000,000
Specications subject to change without notice.

7
Warnings
TO PREVENTTHE RISK OF ELECTRICAL SHOCK OR FIRE:
• This product is designed for indoor use only.
• Do not use in wet or damp areas exposed to moisture.
• Not recommended for use with aquariums. High humidity environments can cause corrosion
and surface contamination, which may result in heat buildup and/or arcing between plug
blades.
• Device must be properly connected to a grounded three-prong receptacle.
• Do not daisy chain the unit with another extension cord or multiple outlet device.
• Do not remove cover. No user serviceable parts inside. Refer servicing to qualied
service personnel.
Limited Product Warranty
Philips warrants to the original purchaser (Customer) only that this Philips brand Theatre Director
AdvancedSurgeProtector (Product) shallbe freeof defects inmaterialsorworkmanshipfor aperiod
of 5 years from the purchase date. If the product proves to be defective during that period, Philips
will repair or replace it without charge for parts or labor. Repair or replacement will be Philips’only
responsibility and the consumer’s only remedy. IN NO EVENT SHALL PHILIPS BE RESPONSIBLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES; EXCEPT FOR (AND ONLY FOR) the specic
limited agreement of Philips to provide certain warranty benets regarding connected
equipment listed in the “Connected Equipment Warranty” section. [Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above exclusion may not
apply to you.]
To make a product warranty claim:
1. Call the Philips customer service number (919-573-7863).
2. Give a full description of the problem.
3. You will be given a Return Authorization (RA) number – no returned product will be accepted
without an RA number.
4. Send the product, transportation prepaid, to Philips’address below.
This warranty gives you specic legal rights, and you may also have other rights which vary from
state to state.

8
Connected Equipment Warranty
The Customer’s exclusive remedy under any warranty, including this express Connected
Equipment Warranty or any applicable implied warranty, and Philips’ sole obligations, are as
follows for“Connected Equipment”: If, (a) the Product purchased and owned by the Customer
is defective in materials or workmanship under the Limited ProductWarranty, or any applicable
implied warranty; (b) the stated Limited Product Warranty requirements have been met; and
(c) none of the limitations or exclusions on warranty coverage apply; Philips will (as Philips
elects, as permitted by law) repair, replace or pay the Agreed Damage Amount (dened below)
for the item(s) of Customer’s electronic equipment (“Connected Equipment”) that is directly
and properly connected to the Product, if (and only if) the Connected Equipment is damaged
by (a) AC power line transients, spikes or surges on properly installed, grounded and code-
compliant 120 volt power lines in the United States or Canada; or (b) transients, surges or spikes
on standard telephone equipment lines or Base 10T Ethernet lines that are properly installed
and connected (a“Power Disturbance”); and (c) is directly plugged into and properly connected
to the Product in its original condition which is properly operated when a Power Disturbance
passes through the Product, and (a) exhausts the protection capacity of the Product; or (b)
damages the Product. This provision sets out the only liability or any character of Philips
for direct, indirect, special consequential, and/or incidental damages under our Limited
Product Warranty, applies only to Connected Equipment, and all such liability is limited to
the Agreed Damage Amount.
Philips will inspect and examine the Product and the item(s) of Connected Equipment (or the
Customer’swrittenstatementandrepaircostestimatesforthose item(s)). The Product must be
returned for inspection by the Customer. If the Product is not as warranted (under warranty
terms applicable to the Product), and the damage to Connected Equipment is covered by this
warranty, Philips will (in addition to warranty remedies for the Product itself), repair (or pay the
costs of repair) or replace the Connected Equipment; or, at the option of Philips as permitted by
law, pay to the Customer the Agreed Damage Amount for all items of the Customer’s Connected
Equipment.

9
Agreed Damage Amount
TheAgreedDamageAmount for allitemsof theCustomer’s ConnectedEquipmentshall bethe lesser
of the amount determined under clause (a) or (b) below, reduced by any amounts described in
clause (c) below.
a) The fair market value of the equipment shall be the current value of the equipment specied
in the most recent edition of Orion Blue Book (by Orion Research Corporation, Roger Rohrs
Publisher) or a valuation as determined by Philips in its reasonable discretion.
b) The following aggregate ceiling (maximum) amount for all Connected Equipment:
Model SPP4200: $500,000
Model SPP4210: $750,000
Model SPP4220: $1,000,000
c) The amount(s) of all payments the Customer received or is entitled to receive from its insurance
or from other sources or persons for the Connected Equipment or damage to such equipment so
that Philips’maximum liability shall be reduced to reect all such other payments or sources of
recovery.
If Philips replaces the Connected Equipment, or pays to the Customer the Agreed Damage Amount,
the Customer shall transfer such item(s) to Philips without warranty by the Customer, but free of
lien or any other interest.
LIMITATIONS: THESE WARRANTIES DO NOT COVER
The protection of the Limited Product Warranty and the Connected Equipment Warranty, or any
applicable implied warranty, does not apply to any product used for commercial, institutional or
industrial applications, any product that has had the battery replaced by the Customer, or to any
product that hasbeen damageddue to misuse, neglect,alteration,mishandling,accident,improper
installation or unauthorized repair.
These warranties do not cover damage to Connected Equipment or apply if the Product has been
operated in a failure mode, or not in compliance with the operating instructions; or if the Connected
Equipment has been operated in a failure mode or not operated in compliance with the instructions
and manuals of its manufacturer/vendor.
The Connected EquipmentWarranty covers only damage within the specic terms of this document
to Connected Equipment; and only to the ceiling amount as described in the “Agreed Damage
Amount”section of this document.