Philips ThinkLink SE8881B/38 User manual

Register your product and get support at
www.philips.com/welcome
SE888
EN User manual

3EN

4
Call from the redial list 21
Call from the phonebook 21
Call from the call log 21
End a call 21
Answer a call 21
Divert the incoming call to the answering
machine 22
Turn off the ringer for all incoming calls 22
Adjust the volume during a call 22
Mute the microphone 22
Turn the speaker on or off 22
Make a second call 22
Answer a second call 22
Toggle between two calls on the handset
and base station 22
Toggle between two calls on the land line
and Bluetooth line 23
Make a conference call with external callers 23
Make a conference call on the land line and
Bluetooth line 23
6 Intercom and conference calls 24
Make a call to another handset 24
While you are on the phone 24
Toggle between calls 24
Transfer a call 24
Make a conference call 24
During an external call 24
During the conference call 25
7 Text and numbers 26
Enter text and numbers 26
Switch between the upper case and lower
case 28
8 Phonebook 29
Access the phonebook directories 29
Direct access memory 29
View the phonebook 29
Download the phonebook from the mobile
phone or computer 29
Search a record 29
Scroll the contact list 29
Enter the rst character of a contact 30
Call from the phonebook 30
Access the phonebook during a call 30
Add a record 30
Contents
1 Important safety instructions 7
2 Your SE888 9
What is in the box 9
Overview of the phone 10
Overview of the base station 11
Main menu icons 12
Display icons 13
3 Get started 14
Connect the base station and charger 14
Install the handset 14
Congure your phone (country dependent) 15
Select the country 15
Set the date and time 15
Set the date and time format 15
Charge the handset 15
Check the battery level 16
What is standby mode? 16
Check the signal strength 16
4 Bluetooth 17
Rename your device 17
Pair SE888 17
Pair SE888 with your mobile phones 17
Pair SE888 with your computer 17
Synchronize the phonebook and call log 18
Download the phonebook and update the
call log from the mobile phones 18
Download the phonebook from the
computer 18
Manage the devices list 18
Connect/Disconnect the device 18
Rename the device 19
Delete a device/Delete all devices on the list 19
Change the PIN code 19
5 Calls 20
Make a call 20
Quick call 20
Dial before you call 20
Redial the most recent number 20
EN

5
Set the sound prole 41
15 Services 42
Access the services menu 42
Auto conference 42
Activate/Deactivate auto conference 42
Manage the carrier code 42
Activate auto removal of the carrier code 42
Deactivate auto removal of the area code 42
Manage the area code 43
Activate auto removal of the area code 43
Deactivate auto removal of the area code 43
Auto prex 43
Set auto prex 43
Network type 44
Select the recall duration 44
Dial mode 44
Set the dial mode 44
First ring 44
Turn the rst ring on/off 44
Auto clock 45
Register the handsets 45
Auto registration 45
Manual registration 45
Unregister the handsets 46
Call services 46
Call forward 46
Activate/Deactivate call forward 46
Edit the activation/deactivation code 46
Call return 47
Call the return service centre 47
Edit the call return service centre number 47
Call-back service 47
Cancel the call-back service 47
Edit the cancel call-back service number 47
Hide your identity 47
Activate ID withheld 47
Edit the ID withheld code 47
Restore default settings 47
16 Baby monitor 49
Activate/Deactivate the baby monitor 49
Send an alert 49
Send to other handsets 49
Send to an external line 49
Set the baby cry level 49
Edit a record 30
Set the melody 31
Delete a record 31
Delete all records 31
9 Call log 32
Access the call records 32
View the call records 32
Download the phonebook from the mobile
phone or computer 32
Return a call 32
Save a call record to the phonebook 33
Delete a call record 33
Delete all call records 33
10 Redial list 34
Access the redial list 34
Redial a call 34
Save a redial record to the phonebook 34
Delete a redial record 34
Delete all redial records 35
11 Phone settings 36
Access the phone settings menu 36
Set the date and time 36
ECO mode 36
Name the handset 36
Set the display language 36
Line settings 37
12 Alarm clock 38
Access the Alarm menu 38
Set the alarm 38
13 Display settings 39
Access the Display menu 39
Set the display 39
14 Sound settings 40
Access the sounds menu 40
Set the handset’s ringtone volume 40
Set the handset’s ringtone 40
Set the silent mode 40
Set the key tone 40
Set the docking tone 41
EN

6
17 Telephone answering machine 50
Turn on/off the answering machine 50
Through the handset 50
Through the base 50
Set the answering machine language 50
Set the answer mode 50
Announcements 51
Record an announcement 51
Listen to the announcement 51
Restore the default announcement 51
Incoming messages (ICM) 51
Listen to the incoming messages 51
From the base 52
From the handset 52
Delete an incoming message 52
From the base 52
From the handset 52
Delete all old incoming messages 52
From the base 52
From the handset 52
Call screening 52
From the base 52
Set the sound quality of the message 52
Set the ring delay 53
Remote access 53
Change the PIN code 53
Activate/deactivate the remote access 53
Access the answering machine remotely 53
Remote access commands 54
18 Default settings 55
19 Technical data 56
20 Notice 57
Declaration of conformity 57
Use GAP standard compliance 57
Compliance with EMF 57
Disposal of your old product and batteries 57
Trademarks 58
21 Frequently asked questions 59
EN

7
To avoid damage or malfunction
Caution
•Use only the power supply listed in the user
instructions.
•Use only the batteries listed in the user instructions.
•Do not allow the charging contacts or the battery to
come into contact with metal objects.
•Do not open the handset, base station or charger as
you could be exposed to high voltages.
•Do not allow the product to come into contact with
liquids.
•Risk of explosion if battery is replaced by an incorrect
type.
•Dispose of used batteries according to the instructions.
•Always use the cables provided with the product.
•For pluggable equipment, the socket-outlet shall
be installed near the equipment and shall be easily
accessible.
•Handsfree activation could suddenly increase the
volume in the earpiece to a very high level: make sure
the handset is not too close to your ear.
•This equipment is not designed to make emergency
calls when the power fails. An alternative has to be
made available to allow emergency calls.
•Do not expose the phone to excessive heat caused by
heating equipment or direct sunlight.
•Do not drop your phone or allow objects to fall on
your phone.
•Do not use any cleaning agents containing alcohol,
ammonia, benzene, or abrasives as these may harm
the set.
•Do not use the product in places where there are
explosive hazards.
•Do not let small metal objects come into contact with
the product.This can deteriorate audio quality and
damage the product.
•Active mobile phones in the vicinity may cause
interference.
•Metallic objects may be retained if placed near or on
the handset receiver.
1 Important safety
instructions
Power requirements
• This product requires an electrical supply
of 100-240 volts AC. In case of power
failure, the communication can be lost.
• The voltage on the network is classied
as TNV-3 (Telecommunication Network
Voltages), as dened in the standard EN
60950.
Warning
•The Electrical network is classied as hazardous. The
only way to power down the charger is to unplug the
power supply from the electrical outlet. Ensure that the
electrical outlet is always easily accessible.
EN

8
When using the phone as a baby monitor
Caution
•Children should be supervised to ensure that they do
not play with the appliance.
•Make sure the baby unit and the cord are always out of
reach of the baby (at least 1 metre/3 feet away).
•Keep the parent unit at least 1.5 metres/5 feet away
from the baby unit to prevent acoustic feedback.
•Never place the baby unit inside the baby’s bed or
playpen.
•Never cover the parent unit and the baby unit with
anything (e.g. a towel or blanket). Always make sure the
cooling vents of the baby unit are free.
•Take every precaution to make sure that your baby can
sleep safely.
•This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
•If you place the parent unit next to a transmitter or
other DECT appliance (e.g. a DECT telephone or
wireless router for the internet), the connection with
the baby unit may be lost. Move the baby monitor
further away from the other wireless appliances until
the connection is restored.
•This baby monitor is intended as an aid. It is not a
substitute for responsible and proper adult supervision
and should not be used as such.
About operating and storage temperatures
• Operate in a place where temperature is
always between 0°C to +35°C (32°F to
95°F).
• Store in a place where temperature is
always between -20°C and +45°C (-4° F
to 113° F).
• Battery life may be shorter in low
temperature conditions.
EN

9
Power adapter**
Line cord*
Warranty
Quick start guide
CD rom
Note
•* In some countries, you have to connect the line
adapter into the line cord, then plug the line cord into
the telephone socket.
2 Your SE888
Congratulations on your purchase and welcome
to Philips!
To fully benet from the support that Philips
offers, register your product at www.philips.
com/welcome.
What is in the box
Base station
Handset**
Charger**
EN

10
1 Earpiece
2 - Delete text or digits.
- Cancel operation.
- Enter the redial list.
3 - End the call.
- Exit the menu/
operation.
4 - Scroll up on the
menu.
- Increase the
earpiece/speaker
volume.
- Enter the
phonebook.
- Scroll down on the
menu.
- Decrease the
earpiece/speaker
volume.
- Enter the call log.
/ - Move the cursor to
the left/right in editing
mode.
5 - Make a predial call.
- Press and hold to
enter a pause
- Switch to upper/
lower case during
editing.
6 - Mute/unmute the
microphone.
7 Microphone
8 - It is displayed when
the speaker phone
is on.
- Make and receive
calls through the
speaker.
9*- Set the dial mode
(pulse mode or
temporary tone
mode).
10 - Make and receive
calls.
Note
•** In multi-handset packs, there are additional handsets,
chargers, and power adapters.
Overview of the phone
EN

11
1 - Find handsets
- Enter registration
mode
2MENU - Enter the main
menu screen.
- Turn answering
machine on/off.
3 Right soft key - Delete text or digits.
- Cancel operation.
- Select the function
displayed on the
screen directly above
the key.
- Play messages.
- Stop messages
playback.
4 - Scroll up on the
menu.
- Enter the
phonebook.
- Scroll down on the
menu.
- Enter the call log.
5 LCD display
6 Left soft key - Conrm option.
- Enter the options
menu.
- Select the function
displayed on the
screen directly above
the key.
- Delete the current
playback message.
- Press and hold
to delete all old
messages.
7 - Increase the speaker
volume.
- Decrease the
speaker volume.
8 Loudspeaker
9/HOME - Make and receive
calls.
- End the call.
11 - Access the main
menu.
- Conrm option.
- Enter the options
menu.
- View the new
available event.
- Select the function
displayed on the
handset screen directly
above the key.
12 Loudspeaker
13 Battery door
Overview of the base station
Top view
Bottom view
EN

12
Icon Descriptions
[Phone setup] - Set the date and
time, ECO mode, handset name
and display language.
[Sounds] - Set the ring volume,
ring tone, key tone etc.
[Services] - Set the auto
conference, auto prex, network
type, recall time, auto clock, dial
mode, register/unregister handset,
call services etc.
The services are network and
country dependent.
[Alarm] - Set date and time, alarm,
alarm tone etc.
[Phonebook] - Add, edit, manage
phonebook entries etc.
[Call list] - Displays the call history
of all missed or received calls.
[Display] - Set the brightness,
screen saver etc.
[Baby monitor] - Set the alert to
other handsets and the baby cry
level.
[Answer machine] - Setup, listen
to, delete phone messages, etc.
10 /MOBILE - Make calls through
mobile phones.
11 REDIAL - Enter redial list
and dial the recent
number.
12 FLASH/CALL
WAIT
- Recall key (This
function is network-
dependent.)
13 - Press to enter a
pause.
- Switch between
lower and upper case
during text editing.
14 INTERCOM - Make an intercom
call.
- Make a conference
call.
15 - Mute/unmute the
microphone
16 *- Set the dial mode
(pulse mode or
temporary tone
mode).
17 Microphone
18 USB socket
for iPhone
charging
19 Micro USB
cable for
mobile phone
charging
Main menu icons
The following is an overview of the menu
options that are available in your SE888. For
detailed explanation of the menu options, see
the corresponding sections in this user manual.
EN

13
The Bluetooth function is
activated. Number ‘1’ indicates
mobile 1 while ‘2’ indicates mobile
2, in the active list of bluetooth
device.White color means the
device is in range or the service
is available. Gray color means
the device is added in the active
list but is out of range or not
available. Blank color means the
corresponding active list has no
device added.
It is displayed when the baby
monitor is set up.
/ It is displayed when you scroll up/
down a list/increase and decrease
the volume.
ECO The ECO mode is activated.
Display icons
In standby mode, the icons shown on the main
screen tell you what features are available on
your handset.
Icon Descriptions
When the handset is off the base
station/charger, the bars indicate
the battery level (full, medium and
low).
When the handset is on the base
station/charger, the bars keep
scrolling until charging is complete.
The empty battery icon ashes
and you hear an alert tone.
The battery is low and needs
recharging.
It displays the link status between
the handset and base station.The
more bars are shown, the better
the connection is.
It ashes when there is a new
missed call.
It is steadily on when browsing the
new missed calls in call log.
The alarm is activated.
The speaker is on.
The ringer is off.
The silent mode is on but the
current time is not in the set
period.
Answering machine: it ashes
when there is a new message.
It displays when the telephone
answering machine is turned on.
It ashes when there is a new
voice message.
It remains steadily on when the
voice messages are already viewed
in the call log.
The icon is not shown when there
is no voice message.
EN

14
• the DC jack at the bottom of the
extra handset charger.
• the power socket on the wall.
4For mobile phones with micro USB
charging, connect the micro USB cable plug
to the micro USB socket of the mobile
phone.
5For iPhone users, connect the plug of your
USB charging cable (not supplied) to the
USB socket at the bottom of SE888.
Install the handset
The batteries are pre-installed in the handset.
Pull off the battery tape from the battery door
before charging.
3 Get started
Caution
•Make sure that you have read the safety instructions in
the “Important” section before you connect and install
your handset.
Connect the base station and
charger
Warning
•Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or underside of the phone.
•Use only the supplied power adapter to charge the
batteries.
Note
•If you subscribe to the digital subscriber line (DSL) high
speed internet service through your telephone line,
make sure that you install a DSL lter between the
telephone line cord and the power socket. The lter
prevents noise and caller ID problems caused by DSL
interference. For further information about DSL lters,
contact your DSL service provider.
•The type plate is located on the bottom of the base
station.
1Connect each end of the power adapter
to:
• the DC jack at the bottom of the
base station;
• the power socket on the wall.
2Connect each end of the line cord to:
• the telephone socket at the bottom
of the base station;
• the telephone socket on the wall.
3Connect each end of the power adapter
to (for multi-handset versions only):
EN

15
3Press the numeric buttons to enter the
date and time.
Note
•If the time is in 12-hour format, press *on the handset/
base station to select [AM] or [PM].
4Press [OK] to conrm.
Set the date and time format
1Access the phone settings menu to set the
date and time in either way:
• On the handset, select [Menu] >
> [Date & time], then press [OK] to
conrm.
• On the base station, press MENU,
select [Phone setup] > [Date & time],
then press [OK] to conrm.
2Select [Date format] or [Time format].
3Press / on the handset or base station.
4Select [DD/MM/YY] or [MM/DD/YY] as
the date display, and [12 Hours] or [24
Hours] as the time display.Then press
[OK] to conrm.
»The setting is saved.
Note
•The date and time format setting is country-dependent.
Charge the handset
Place the handset on the base station to
charge the handset.When the handset is
placed correctly on the base station, you hear a
docking sound.
»The handset starts charging.
Caution
•Risk of explosion! Keep batteries away from heat,
sunshine or re. Never discard batteries in re.
•Use only the supplied batteries.
•Risk of decreased battery life! Never mix different
brands or types of batteries.
Warning
•Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Congure your phone
(country dependent)
1 When using your phone for the rst time,
you see a welcome message.
2Press [OK].
Select the country
Select your country, then press [OK] to
conrm.
»The language setting is saved.
Set the date and time
Tip
•To set the date and time later, press [Back] to skip this
setting.
1Access the phone settings menu to set the
date and time in either way:
• On the handset, select [Menu] >
> [Date & time], then press [OK] to
conrm.
• On the base station, select [Phone
setup], then press [OK] to conrm.
2Select [Set date]/[Set time], then press
[OK] to conrm.
EN

16
What is standby mode?
Your phone is in standby mode when it is idle.
The standby screen displays the handset name
and number/date and time, signal icon, and
battery icon.
Check the signal strength
It displays the link status between
the handset and base station.The
more bars are shown, the better
the connection is.
• Make sure that the handset is linked to the
base station before you make or receive
calls and carry out the functions and
features.
• If you hear warning tones when you are
on the phone, the handset is almost out
of battery or the handset is out of range.
Charge the battery or move the handset
closer to the base station.
Note
•Charge the batteries for 8 hours before rst use.
•If the handset becomes warm when the batteries are
charging, it is normal.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current battery
level.
When the handset is off the base
station/charger, the bars indicate
the battery level (full, medium, and
low).
When the handset is on the base
station/charger, the bars ash until
charging is complete.
The empty battery icon ashes.
The battery is low and needs
recharging.
If the batteries are empty, the handset turns
off. If you are on the phone, you hear warning
tones when the batteries are almost empty.The
call gets disconnected after the warning.
EN

17
3Place the mobile phone close to the base
station, then press [OK] to conrm.
»The mobile phone name is displayed
on the screen.
4On the mobile phone, select SE888 and
connect.
5Enter the PIN code on the mobile phone,
if necessary.
Tip
•The default PIN code is 0000.
»When SE888 and the mobile phone
are paired, or is displayed on the
screen of the handset and base station.
Note
•When the Bluetooth device list is full, remove some
mobile phone names before pairing can start.
•If the name of SE888 exists in your mobile phone, you
have to remove it from your mobile phone.Then you
can do the pairing again.
•When pairing is successful, you can add the new mobile
phone name to the active list. Remove some mobile
phone names if the active list is full. See “Manage the
devices list” in this chapter for information.
Pair SE888 with your computer
Install the PC software ‘ThinkLink’ saved in the
cd rom or at http://www.philips.com/support
1Double click on Setup.exe to start the
installation.
2Select the display language.
3After the installation is done, select ‘?’ and
follow the instructions to do the pairing.
4 Bluetooth
SE888 supports Bluetooth wireless technology.
You can connect it to a compatible Bluetooth
device such as a computer and mobile phone.
Then you can make and receive calls from your
mobile phone on the SE888 handset.You can
also download the phonebook and call log from
your computer or mobile phone with its base
station.
Note
•Make sure that the other Bluetooth devices with
which you establish a connection support Bluetooth
function. See the user manual of the other devices for
information.
•The Bluetooth connection is subject to interference
from obstructions such as walls or other electronic
devices.
Rename your device
The name of your phone is SE888 by default.
You can rename it in this way:
1On the base station, press MENU.
2Select [Bluetooth] > [Rename Me], then
press [OK] to conrm.
3Edit the name, then press [Save] to
conrm.
Pair SE888
Pair SE888 with your mobile phones
Make sure the Bluetooth function of the mobile
phones is activated and in search status.Then
you can do the pairing in this way:
1On the base station, press MENU.
2Select [Bluetooth] > [Find Me].
EN

18
»The call log from the mobile phone is
updated on the base station.
Download the phonebook from the
computer
Install the PC software ‘ThinkLink’ saved in the
cd rom or at http://www.philips.com/support
1Double click on Setup.exe to start the
installation.
2Select the display language.
3After the installation is done, select ‘?’ and
follow the instructions to download the
phonebook from the computer.
Manage the devices list
You can manage your Bluetooth devices list
(mobile phones/computer) in this way:
1On the base station, press MENU and
select [Bluetooth] > [Device list], then
press [OK] to conrm.
»The Bluetooth devices list is displayed.
2Select a Bluetooth devices, press [Option].
3Select [Connect]/[Disconnect]/[Delete]/
[Delete all], then press [OK] to conrm.
Note
•You can see [Disconnect] in the option list only when
the Bluetooth device is connected; and [Connect] only
when the Bluetooth device is disconnected.
Connect/Disconnect the device
1On the base station, press MENU and
select [Bluetooth] > [Device list], the
press [OK] to conrm.
»The Bluetooth devices list is displayed.
2Select a Bluetooth device, press [Option].
3Select [Connect]/[Disconnect], then press
[OK] to conrm.
Synchronize the phonebook
and call log
Download the phonebook and update
the call log from the mobile phones
On the base station
1Make sure that the mobile phone is already
connected to SE888 with Bluetooth.
2On the base station, press MENU and
select [Bluetooth] > [Mobile sync].
3Select [Phonebook] to download the
phonebook or [Call log] to update the
call log from the mobile phone, then press
[OK] to conrm.
4Select a mobile phone, then press [OK]
again to conrm.
»The phonebook and call log from the
mobile phone are updated on the base
station.
Note
•The call log from the mobile phone can be updated
automatically if you select [Call log mode] > [Auto] .
•After the update is complete, the new phonebook
overrides the old one.
•If there is an incoming call when phonebook/call log
update is in progress, the update is suspended and
resumes after the call ends.
On the handset
1To update the phonebook, press to
access the phonebook menu.
2 Select your mobile phone ( or ).
3Press [Update].
»The phonebook from the mobile
phone is updated on the base station.
1To update the call log, press to access the
incoming call menu.
2Select [Incoming calls].
3 Select your mobile phone ( or ).
4Press [Update].
EN

19
»The selected Bluetooth device
is connected to/disconnect from
Bluetooth.
Rename the device
1On the base station, press MENU.
2Select [Bluetooth] > [Rename Me], then
press [OK] to conrm.
»The current phone name is displayed.
3Edit the name, then press [Save] to
conrm.
»The new phone name is displayed.
Delete a device/Delete all devices on
the list
1On the base station, press MENU and
select [Bluetooth] > [Device list] , then
press [OK] to conrm.
»The Bluetooth device list is displayed.
2Select a Bluetooth device, press [Option].
3Select [Delete]/[Delete all], then press
[OK] to conrm.
Note
•If you select to delete all Bluetooth devices on the list.
A conrmation message is displayed. Press [Yes] to
conrm.
Change the PIN code
1On the base station, press MENU.
2Select [Bluetooth] > [Change PIN], then
press [OK] to conrm.
3Press [Clear] to remove the current PIN.
4Enter the new PIN, then press [OK] to
conrm.
»The new PIN is saved.
EN

20
Tip
•If you select [Auto] on the handset, the idle line is
pre-selected for an outgoing call, with [Home] as the
highest priority.Then [Mobile 1] and [Mobile 2]. If
you select [Manual], select an icon among these three
options.
Dial before you call
1Dial the phone number on the handset or
base station.
• To erase a digit, press [Clear].
• To enter a pause, press and hold .
2Press / to select the land line or
Bluetooth line ( / / ) from which you
want to make an outgoing call.
3Then, you can either:
• press / on the handset; or
• press /HOME or /MOBILE on
the base station and select a line or
mobile phone to dial out the call.
Note
•Make sure that the Line settings are set to [Home] for
land line or [Mobile 1]/[Mobile 2] for Bluetooth line.
For information, see Line settings in the Phone settings
chapter.
Tip
•If you select [Auto] on the handset, the idle line is
pre-selected for an outgoing call, with [Home] as the
highest priority.Then [Mobile 1] and [Mobile 2]. If
you select [Manual], select an icon among these three
options.
Redial the most recent number
1Press on the handset.
»The redial list is displayed and the most
recent number is selected.
2Press [OK].
5 Calls
Note
•When the power fails, the phone cannot access
emergency services.
Tip
•Check the signal strength before you make a call or
when you are in a call. For information, see “Check the
signal strength” in the “Get started” section.
Make a call
You can make a call from the land line or
Bluetooth line through your mobile phones in
these ways:
• Quick call
• Dial before you call
• Redial the most recent number
• Call from the redial list.
• Call from the phonebook list
• Call from the call log
Quick call
1You can make a call from the land line:
• To make a call from the land line,
press / on the handset or
• /HOMEon the base station.
Note
•Make sure that the line settings are set to [Home]
for land line. For information, see “Line settings” in the
Phone settings chapter.
2Dial the phone number.
»The number is dialed out.
»The duration of your current call is
displayed.
EN