Philips CRD150 User manual

CRD150
User manual
Always there to help you
Register your product and get support at
www.philips.com/welcome
GrayTurqoise Duotone
Black / PMS300
Question?
Contact
Philips
Question?
Contact
Philips
Question?
Contact
Philips

English
EN 1
Contents
1 Important safety instructions 2
2 Your phone 2
What is in the box 2
Overview of the phone 3
3 Get started 4
Connect the base station 4
Insert the supplied batteries 5
Set the date and time 5
What is standby mode? 5
4 Display icons 6
5 Calls 6
Make a call 6
Answer a call 7
Adjust the speaker volume 7
Turn the speaker on or off 7
Transfer a call 7
6 Settings 7
Set the contrast of the screen 7
Temporary time setting 7
7 Technical data 8
8 Notice 8
Disposal of your old product and
batteries 8
9 Frequently asked questions 9
Contents

2 EN
1 Important safety
instructions
Warning
•The voltage on the network is classied as TNV-3
(Telecommunication Network Voltages), as dened in
the standard EN 60950.
To avoid damage or malfunction
Caution
•Use only the batteries listed in the user instructions.
•Risk of explosion if battery is replaced by an incorrect
type.
•Dispose of used batteries according to the instructions.
•Do not dispose of batteries in re.
•Always use the cables provided with the product.
•Do not allow the charging contacts or the battery to
come into contact with metal objects.
•Do not let small metal objects come into contact with
the product. This can deteriorate audio quality and
damage the product.
•Metallic objects may be retained if placed near or on
the handset receiver.
•Do not use the product in places where there are
explosive hazards.
•Do not open the handset, base station or charger as
you could be exposed to high voltages.
•Do not allow the product to come into contact with
liquids.
•Do not use any cleaning agents containing alcohol,
ammonia, benzene, or abrasives as these may harm
the set.
•Do not expose the phone to excessive heat caused by
heating equipment or direct sunlight.
•Do not drop your phone or allow objects to fall on
your phone.
•Active mobile phones in the vicinity may cause
interference.
About operating and storage temperatures
• Operate in a place where temperature is
always between 0°C to +40°C (up to 90%
relative humidity).
• Store in a place where temperature is
always between -20°C and +45°C (up to
95% relative humidity).
• Battery life may be shorter in low
temperature conditions.
2 Your phone
Congratulations on your purchase and welcome
to Philips!
To fully benet from the support that
Philips offers, register your product at
www.philips.com/welcome.
What is in the box
Base station
Handset
Line cord*
Coil cord

English
EN 3
2 x AAA batteries
Guarantee
User manual
Note
• * In some countries, you have to connect the line
adapter to the line cord, then plug the line cord to the
telephone socket.
Overview of the phone
a
Call transfer
b
Enter a pause when making a predial call.
c
It shows the incoming call log.
d
It shows the outgoing call log.
e
• Delete the digit during editing.
• Exit the menu.
f REDIAL
Redial key
g
• Turn the speaker phone on/off.
• Make and receive calls through the
speaker.
h Microphone
i FLASH/
• Recall key (this feature is network
dependent).
• Set the contrast level on the LCD
screen in standby mode.
j *
Press and hold for 3 seconds to set the
temporary tone mode during pulse mode.
k SETTING
Access the setting menu.
l Loudspeaker
m
• Scroll down on the menu.
• Move to the right.
n
• Scroll up the menu.
• Move to the left.
o
Adjust the speaker volume during a call.
a
d
c
b
g
f
e
i
h
j
k
l
m
n
o

4 EN
3 Get started
Caution
•Make sure that you have read the safety instructions in
the 'Important safety instructions' section before you
connect and install your phone.
Connect the base station
Note
•If you subscribe to the digital subscriber line (DSL) high
speed internet service through your telephone line,
ensure you install a DSL lter between the telephone
line cord and the power socket. The lter prevents
noise and caller ID problems caused by the DSL
interference. For more information on the DSL lters,
contact your DSL service provider.
•The type plate is located on the bottom of the base
station.
1 Connect each end of the line cord to:
• the telephone socket at the back of
the unit;
• the telephone socket on the wall.
2 Connect the coil cord to the base and
handset.

English
EN 5
Insert the supplied batteries
Caution
•Risk of explosion! Keep batteries away from heat,
sunshine or re. Never discard batteries in re.
•Use only the supplied batteries.
•Risk of decreased battery life! Never mix different
brands or types of batteries.
Warning
•Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Note
•When the line cord is disconnected and batteries are
removed, all settings are reset within 20 seconds.
Set the date and time
1 Press SETTING.
» is displayed.
2 Press SETTING again to conrm.
3 Press / to set the year, press
SETTING to conrm.
4 Press SETTING again to date and time.
5 Pick up the handset to conrm the setting.
» The corresponding week of the day is
also displayed.
Your phone is now ready to use.
What is standby mode?
Your phone is in standby mode when it is idle.
The year, date, time and incoming counter are
displayed on the standby screen.

6 EN
4 Display icons
In standby mode, the icons shown on the screen
tell you what features are available on your
phone.
a
It remains steadily on when browsing
answered incoming calls in the call log.
b
It indicates an outgoing call in the call list.
c Call counter
d Week of the day display
e Phone display
f
There is a missed call.
g
It indicates repeated missed calls from the
same number.
h Date display
i Time display
5 Calls
Make a call
You can make a call in these ways:
• Normal call
• Call from the call log
• Call from the redial list
Normal call
1 Pick up the handset or press .
2 Dial the phone number.
» The number is dialed out.
Tip
• To erase a digit, press .
• To enter a pause, press .
Call from the call log
The call log stores the call history of all incoming
or outgoing calls.The incoming call history
includes the number of the caller, call time and
date.This feature is available if you have registered
to the caller ID service with your service provider.
Incoming call
1 Press in standby mode.
2 Press / to select a record on the list.
3 Press REDIAL or to make the call.
Outgoing call
1 Press in standby mode.
2 Press again to view the number and
time of the most recent outgoing call.
3 Press REDIAL or to make the call.
Redial a call
1 Pick up the handset.
2 Press REDIAL.
» The most recent outgoing call is dialed.
a
d
c
b
e
f
g
h
i

English
EN 7
Answer a call
When the phone rings, you can select from the
following options to answer the call:
• pick up the handset;
• press .
Note
•If you have subscribed for a caller ID service with
the service provider, you will see the caller number
displayed on the screen.
Adjust the speaker volume
Press in standby mode to select the low or
high volume.
Turn the speaker on or off
Press .
Transfer a call
Note
•This service is network dependent. Check with the
service provider for additional charges.
1 Make a rst call.
2 Press during a call.
3 Make a second call.
4 Hang up the handset when the other side
answers the call.
» The rst call is transferred to the
second call.
6 Settings
Set the contrast of the screen
You can set the contrast of the phone screen to
5 different levels.
1 Press FLASH/ in standby mode.
2 Pick up the handset to conrm the setting.
Temporary time setting
Note
•You can ignore and which are
country dependent codes.
1 Press SETTING to enter the setting mode.
2 Press / to select .
3 Press SETTING again to enter the
temporary time setting menu.
» is displayed.
4 Press / to set the time.
5 Pick up the handset to conrm the setting.

8 EN
7 Technical data
General specication and features
• Speaker phone
• Redial
• Calleridenticationstandardsupport:FSK,
DTMF
Battery
• Eastpower:2xAAAbatteries
Weight and dimensions
• Basestationandhandset:465.0grams
80.0x151.0x208.0mm(HxWxD)
8 Notice
Disposal of your old product
and batteries
Yourproductisdesignedandmanufacturedwith
highqualitymaterialsandcomponents,which
canberecycledandreused.
Whenthiscrossed-outwheeledbinsymbol
isattachedtoaproductitmeansthatthe
productiscoveredbytheEuropeanDirective
2002/96/EC.Pleaseinformyourselfaboutthe
localseparatecollectionsystemforelectrical
andelectronicproducts.
Pleaseactaccordingtoyourlocalrulesand
donotdisposeofyouroldproductswithyour
normalhouseholdwaste.
Correctdisposalofyouroldproducthelpsto
preventpotentialnegativeconsequencesforthe
environmentandhumanhealth.
Yourproductcontainsbatteriescoveredbythe
EuropeanDirective2006/66/EC,whichcannot
bedisposedwithnormalhouseholdwaste.
Pleaseinformyourselfaboutthelocalruleson
separatecollectionofbatteriesbecausecorrect
disposalhelpstopreventnegativeconsequences
fortheenvironmentalandhumanhealth.

English
EN 9
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
9 Frequently asked
questions
No dialing tone
Make sure your phone is properly connected to
the line cord.
The phone does not ring.
Make sure the phone is properly connected to
the line cord.
No display or unclear display
•Battery level is too low.
•Check the contrast level of the screen.
The caller ID does not display.
•The service is not activated. Check with
your service provider.
•The caller's information is withheld or
unavailable.
Note
•If the above solutions do not help, disconnect the line
cord and remove the battery. Reinstall the line cord and
the battery after 1 minute and try again.

2013 © WOOX Innovations Limited. All rights reserved.
Philips and the Philips’ Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used by WOOX
Innovations Limited under license from Koninklijke Philips N.V.
UM_CRD150_90_EN_V2.0
WK13425