Philips QT4085 User manual

Vacuum Trimmer
QT4085

2

3
A
B
D
E
G
F
H
I
L
M
K
J
C
1

4

ENGLISH 6
DEUTSCH 14
FRANÇAIS 23
NEDERLANDS 32
ESPAÑOL 40
ITALIANO 49
PORTUGUÊS 57
NORSK 66
SVENSKA 74
SUOMI 82
DANSK 90
 98
TÜRKÇE 107
QT4085

Introduction
Dear customer, you have made the right choice!
Your new maintenance-free Philips vacuum beard trimmer combines
innovative technology and outstanding comfort of use.
The integrated vacuum mechanism absorbs cut-off hairs during use and
guarantees a clean washbasin after use.
The contour-following comb attachment, the self-sharpening cutting unit
and the adjustment ring for selecting hair lengths of 1.5 to 18mm
ensure excellent cutting results and time-saving operation.The high-
quality precision trimmer guarantees a precise and defined cut and the
ergonomic shape of the appliance allows pleasant and comfortable
handling.
Your new Philips vacuum beard trimmer is excellently suited for cutting
and contouring your beard and sideburns.
General description (fig. 1)
AComb attachment
BDetachable cutting unit
CFlexible hair guide
DHair-collection chamber & filter
EAdjustment ring (Precision Zoom Lock`)
FTurbo button
GOn/off button
HGreen charging light with battery-full indication
IRed battery-low light
JSocket for appliance plug
KPrecision trimmer
LPowerplug (2.5V/1500mA)
MCleaning brush
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
◗Keep the appliance and the powerplug dry!
ENGLISH6

◗Check if the voltage indicated on the powerplug corresponds to
the local mains voltage before you connect the appliance.
◗Only use the powerplug supplied.
◗Keep the appliance out of the reach of children.
◗Charge, use and store the appliance at a temperature between
15cC and 35cC.
◗This appliance is only designed for trimming the human beard.
Do not use the appliance for any other purpose.
◗Do not use the appliance if the cutting unit is damaged or
broken, as this may cause injury.
◗If the powerplug is damaged, always have it replaced by one of the
original type in order to avoid a hazard.
◗If the appliance is subjected to a major change in temperature,
pressure or humidity, let the appliance acclimatise for 30 minutes
before you use it.
Charging
Charge the appliance fully before using it for the first time or after a
long period of disuse.
Make sure the appliance is switched off before you start charging it.
Charging takes about 70 minutes if the appliance is completely empty.
1Insert the appliance plug into the appliance and put the
powerplug in the wall socket.
Battery indications
◗The green light burns continuously during fast charging (fig. 2).
◗The green light starts blinking when the battery is full (fig. 3).
◗If the red light blinks when you switch the appliance off after
cordless use, the battery is low and needs to be charged (fig. 4).
◗If the red light blinks but the motor does not start running when
you press the on/off button, the battery is empty and needs to be
charged.
ENGLISH 7

Preparing for use
Always comb your beard or moustache with a fine comb before you
start trimming.
Using the appliance
Corded trimming
Do not run the appliance from the mains when the battery is fully
charged.
BIf the battery is low, you can also use the appliance from the mains:
1Switch the trimmer off, connect it to the mains and wait a few
seconds before switching it on.
2If the battery is completely empty, wait a few minutes before
switching the appliance on.
Turbo function
◗You can use the turbo function for greater suction power and
increased cutting speed.
1Switch the appliance on (fig. 5).
2Press the turbo button (fig. 6).
When you switch the appliance off, the turbo function will automatically
be deactivated.
Absorbing cut hairs
The suction system is activated automatically as soon as you switch the
appliance on. It absorbs cut hairs during every kind of use, i.e. trimming
with and without comb attachment and contouring.The flexible hair
guide follows the contours of the face and directs cut hairs towards the
nozzle of the vacuum mechanism.
We advise you to empty the hair-collection chamber after each
trimming session.When trimming long, dense beards it may also be
ENGLISH8

necessary to empty the hair-collection chamber during the trimming
session in order to maintain optimal suction performance (see chapter
'Cleaning', section 'Hair-collection chamber').
BTo ensure optimal functioning of the vacuum system, do not cut off
more than approx. 7mm of your overall beard length at a time. If you
want to cut your beard shorter, repeat the process one or more times.
Trimming with comb attachment
1Turn the adjustment ring (Precision Zoom Lock`) to the desired
hair length setting (see table) (fig. 7).
◗The setting will appear in the window below the adjustment ring
(Precision Zoom Lock`).
If you are trimming for the first time, start with the maximum hair
length setting (9).
2Switch the appliance on (fig. 5).
◗During trimming, you can use the turbo function for extra
suction power (fig. 6).
ENGLISH 9
Resulting hair length
1.5 mm
2.5 mm
4 mm
5.5 mm
7.5 mm
9.5 mm
12 mm
15 mm
18 mm
Setting
1
2
3
4
5
6
7
8
9

3To trim in the most effective way, move the trimmer against the
direction of hair growth. Do not move the trimmer too fast.
Make smooth and gentle movements and make sure the surface
of the comb attachment always stays in contact with the skin
(fig. 8).
4Switch the appliance off.
Trimming at the unique 'stubble look' setting
◗Use the trimmer with the comb attachment set to hair length
setting 1.This allows you to create a 'stubble look' (fig. 9).
Trimming without comb attachment
Use the trimmer without comb attachment to trim full beards and
single hairs.
1Remove the comb attachment (fig. 10).
BNever pull at the flexible top of the comb attachment.Always pull at
the bottom part.
2Make well-controlled movements and touch the hair lightly with
the trimmer.
Shaping with the precision trimmer
You can use the precision trimmer to shape your moustache and
sideburns, to define contours and to cut single hairs.
1Remove the comb attachment (fig. 10).
BNever pull at the flexible top of the comb attachment.Always pull at
the bottom part.
2Remove the cutting unit (fig. 11).
3Attach the precision trimmer (fig. 12).
4When you are using the precision trimmer, hold the appliance in
such a way that the trimmer is pointing upwards (fig. 13).
ENGLISH10