Philips 32DW9625/05 User manual

1
English
EasyLink features are based on the“one touch operation”approach.This means that a sequence of actions are
executed at the same time in both the television and the video cassette recorder, provided both are fitted
with the EasyLink function and connected with the eurocable supplied with your video recorder.
Digital & Analogue Mode
Your Remote Control 2
Preparation 3
InstallTV setup 13-14
Digital Mode only
Tuning in digital channels 5
StoreTV channels 5
AddTV channels 5
Change channel numbers 6
Channel list 6
Favourite channels 6
Viewing preferences 7
Video/Modem settings 8
Subscription information 8
Technical information 9
Analogue Mode only
Tuning in analogue channels 10
Select menu language and country 10
Automatic installation 11
Manual installation 11
Give name 12
Reshuffle the programme list 12
Select favouriteTV channels 12
Digital & Analogue Mode
Use of the remote control 15-17
Adjusting the settings 18
Picture menu 18
Sound menu 18-21
Features menu 22
Keys on top of theTV 29
Digital Mode only
DigitalTeletext 29
Setting the timer 30
Parental lock 31
Analogue Mode only
Programme list 22
NEXTVIEW 23-26
AnalogueTeletext 27-29
Connecting & selecting equipment 32-36
RC functions for peripherals 37-38
Recording 39
Tips 40
Index 40
Glossary 41
Remark: due to continuous product improvements this document is subject to change without prior notice.
Connect peripheral equipment
Operation
Installation
Contents

Mha
SMARTSMART
213
546
879
0
B
w
®Ò‡π
†
b
Ï
Mqa
ji
TV
EXIT
GUIDE
DIGITAL
TEXT
VCR DVD SAT
SELECT
SETTINGS
OK
DIGITAL
SETUP
SMARTSMART
PICTURESOUND
¬V P
0
n
S
X
P
f
h‡ hX
yÚ
o
œ
pπ
yÚ
®
qQUb
2Preparation
Sfreeze the picture p.17
hold teletext page p. 28
fsolution to puzzles p.28
display PDC/VPS code
Preduce image noise p.17
Smart Controls
Msmart sound p.16
hactive control p.16
asmart picture p.16
qpicture format p. 16
Utime display p.16`
txt-subpage selection p.28
bdual screen on/off p.16
Qsurround mode p.16
Bswitch to standby p.15
SETTINGS
Oanalogue main menu on/off p. 15
0previous programme p.15
hzoom on/off p. 17
Xbilingual choice/sound info p. 17
TXT language group selection p.27
preferred audio language with
digital channels p.7
EasyLink p.37
®recording
‡stop
bteletext on/off p.27
DIGITAL SETUP
Ïdigital menu on/off when in
digital mode p.5
cursor to select
your choice p.10
Installation p.10
Vvolume up/down p. 15
¬sound mute p. 15
Pprogramme selection p. 15
Peripherals p. 37
wselection of EXT1,EXT2,EXT3,
FRONT,Digital or Analogue
TV, videorecorder (VCR), DVD or
Satellite (SAT) selection.
Colour keys
- selectTV channels by theme p.24
(present according to the type ofTV set)
- direct teletext page or
subject selection p.26
Audio andVideo equipment
p.37-38
nAnalogue or Digital mode p.15
jsubtitles on/off p. 15
iscreen information p.17
GUIDE
ONEXTVIEW on/off p.15
(only in analogue mode)
SELECT
OK activate your choice
Your remote control
Preparation

3Preparation
R6 / AA
+
-
&Place theTV on a solid surface.
For ventilation, leave at least 5 cm free all around theTV.
Do not place theTV on a carpet.
To prevent any unsafe situations,do not place any objects on top of theTV.
Avoid heat,direct sunlight and exposure to rain or water.
éInsert the aerial plug firmly into the aerial socket at the back of
theTV. For best picture quality use the aerial cable supplied. (According to
your type ofTV, there may be a suppressor-aerial cable supplied for a better
picture quality.)
“To enjoy Dolby Pro Logic Surround sound,connect two Surround Sound rear
loudspeakers (either supplied or not according to the type ofTV set
purchased) to the back of theTV.
See Connect Extra Loudspeakers/Amplifier, p.34.
‘Insert the mains plug in the wall socket having a mains voltage of 220V-
240V.
To prevent damaging the mains (AC) cord which could cause a hazard,do not
place theTV on the cord.
(Remote control:Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R6-1,5V) as indicated.
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries exhausted batteries may not be disposed of with
your household waste. Please check on how to dispose of exhausted batteries
according to local regulations.
Note: this remote control functions withTVs which use the RC6 signalling standard.
CABLE
Preparation

4Preparation
➪
✹
congratulations for selecting this philips product
click ok to start enjoying your digital television
✹
◆main menu
1 setting the timer
2 choosing favourite channels
3 parental lock
4 viewing preferences
5 getting started
6 subscription information
7 technical information
✹
➪
◆channel list
1 BBC ONE
2 BBC TWO
3 ITV Channel 3
4 Channel 4
5 SDN-5 Eng./N.I.
6 ITV 2
7 BBC CHOICE
✹
➪
◆store channels
Your digital TV is now searching
for all available channels
this may take about 20 minutes,
please be patient
digital channels found 3
other channels found 5
➪
Automatic installation
Start
Stop
TV is searching
One moment please ...
§Switch theTV on: Press the power switch Aon the front of yourTV.
A green indicator on the front of theTV lights up and the screen comes on.
If the indicator is red,press the -P+ key on the remote control.
The green lamp blinks every time you press a key on the remote control.
Switch on for the first time
•When you switch on your set for the first time,the congratulations
message appears on the screen.TheTV is in digital mode.
Press the SELECT/OK key on the remote control to get started.
If the message does not appear and the screen remains snowy, press the n
key on the remote control to switch theTV from analogue to digital mode.
•The main menu is displayed.
The menu item in yellow is actually selected.
The menu items in bold are selectable.
Press the digit key 5 on the remote control.
•The Automatic Installation menu is displayed and theTV begins to search all
available channels.
First all the available analogue channels are searched for and stored
automatically.The channel list is automatically filled with all the programme
numbers and names of theTV channels transmitted.
Next,the store channels menu is displayed and all the available digital
channels are searched for.
•When the search is complete,a channel list is displayed and theTV is
switched to digital mode again.
Note: the instructions on screen may help you to navigate through the menus and to
execute certain actions.Additionally information will be displayed about the
selected channel.
èCard reader
With your newTV you can watch the free to air digital channels like BBC1
and ITV.
If you signed up for an ONdigital subscription, your ONdigital Smartcard will
arrive by post.
If you didn’t start an ONdigital subscription yet,you can still do.
Just visit your local electrical retailer or call ONdigital customer services on
0870 600 9696.Put your ONdigital Smartcard into the slot at the front or
the right side of yourTV (according to the type ofTV set). Make sure it is the
right way round:gold chip facing you or up, the arrow pointing to the slot.
Now call the ONdigitalActivationTeam on 0870 600 1616.
They’ll confirm your name,address, account number,Viewing Smartcard
number and your choice of ONdigital channels.You’ll be able to start viewing
straight away.
Note: See also Subscription information, p. 8.

5Installation
213
546
B
w
®Ò‡ π†
b
Ï
TV VCR DVD SAT
DIGITAL
¬V P
ji
EXIT
TEXTGUIDE
SELECT
OK
DIGITAL
SETUP
n
select menu item
activate
switch main
menu on
return to
main menu
switch main
menu off
✹
◆channel list
1 BBC ONE
2 BBC TWO
3 ITV Channel 3
4 Channel 4
5 SDN-5 Eng./N.I.
6 ITV 2
7 BBC CHOICE
➪
✹
✹
◆getting started
1 channel list
2 change channel numbers
3 add channels
4 store channels
➪
➪
◆main menu
1 setting the timer
2 choosing favourite channels
3 parental lock
4 viewing preferences
5 getting started
6 subscription information
7 technical information
➪
✹
◆add channels
Your digital TV is now searching
for all available channels
this may take about 20 minutes,
please be patient
number of channels found 3
✹
➪
◆store channels
Your digital TV is now searching
for all available channels
this may take about 20 minutes,
please be patient
digital channels found 3
other channels found 5
This function is used to search for new digital channels that may have been
launched by the broadcaster after the initial installation.
&Select add channels in the getting started menu.
éPress the SELECT/OK key.
The search begins and only new channels will be stored and added to the
channel list.
“Press the red key to return to the getting started menu or press the EXIT
key to return to a normalTV picture when the installation is finished.
Add channels
&Select getting started in the main menu with the cursor down or with the
digit key 5.
éPress the SELECT/OK key.
The getting started menu appears.
“Select store channels with the cursor down or with the digit key 4.
‘Press the SELECT/OK key to activate the searching.
All available digitalTV channels are searched for and stored automatically;
The on screen display indicates the percentage of the installation that has
been completed and the number of channels found.
When the search is complete,a channel list is displayed.
(Press the red key to return to the getting started menu or press the EXIT
key to switch the menu off.
TheTV then displays the current programme being broadcast on channel 1.
Note: If you want to stop the search, press the red key.
Store channels
&Press the DIGITAL SETUP key on the remote control to display the main
menu.
Note: if the main menu does not appear,theTV may be in analogue mode. Press the
nkey to switch theTV to digital mode and press the DIGITAL SETUP key again.
éUse the cursor in the up/down,left/right directions to select a menu item or
use the digit key for direct access to a menu item.
“Press the SELECT/OK key to activate.
‘Press the red key to return or press the EXIT key to switch a menu off.
Note: the instructions on screen may help you to navigate through the menus and to
execute certain actions.Additionally information will be displayed about the
selected channel.
To use the menus
These menus enable you to make all the adjustments required to receive
digital channels.
Tuning in the digital channels

6Installation
✹
➪
◆favourite channels
favourites are off
1 BBC ONE v
2 BBC TWO v
3 ITV Channel 3 v
4 Channel 4
5 SDN-5 Eng./N.I. v
6 ITV 2
7 BBC CHOICE
✹
◆channel list
1 BBC ONE
2 BBC TWO
3 ITV Channel 3
4 Channel 4
5 SDN-5 Eng./N.I.
6 ITV 2
7 BBC CHOICE
➪
✹
◆change channel numbers
1 BBC ONE
2 BBC TWO
3 ITV Channel 3
4 Channel 4
5 SDN-5 Eng./N.I.
6 ITV 2
7 BBC CHOICE
➪
✹
◆main menu
1 setting the timer
2 choosing favourite channels
3 parental lock
4 viewing preferences
5 getting started
6 subscription information
7 technical information
➪
This menu enables you to select favourite channels so that after leaving the
installation you can browse through those channels by pressing the - P + key.
Only those channels which are marked as favourites will be displayed.
Non-favourite channels can still be selected with the digit keys.
&Select choosing favourite channels in the main menu.
éPress the SELECT/OK key.
The favourite channel list is displayed.
“Use the cursor up/down to select the channel you want to make a favourite
and press the SELECT/OK key.
A heart symbol alongside the channel name is displayed.
‘Repeat for every channel you want to make a favourite or a non-favourite
channel.
(To remove any of these channels as favourites,select the channel you want to
remove and press the SELECT/OK key.
§After you have selected or de-selected all your favourites,press the green key
as indicated to switch the favourite mode on or off.
Favourite channels
This menu lists all the stored and available digital channels.
&Select channel list in the getting started menu.
éPress the SELECT/OK key.
The channel list is displayed.The symbols alongside the channel numbers
indicate whether the channel has been selected as a favourite channel (heart
symbols) or as locked channels (padlock symbols).
To lock channels or to select channels as favourites, see further.
“Use the cursor up/down to move through the channel list,or left/right to
move a whole page at a time.
‘Press the SELECT/OK key to view the channel selected or press the red key
to return to the getting started menu.
Channel list
If you prefer you can change the order of the stored channels.This is done
by exchanging the position of the channels.
&Select change channel numbers in the getting started menu.
éPress the SELECT/OK key.
The channel list is displayed.
“Select the channel number you want to exchange with the cursor up/down.
‘Press the SELECT/OK key.
(Select the new channel number you want to exchange it with.
§Press the SELECT/OK key.
Repeat the operation until all channels are in your preferred positions.
èPress the red key to return to the getting started menu or press the EXIT
key to return to a normalTV picture.
Change channel numbers

7Installation
✹
➪
◆viewing preferences
1 digital settings
2 video settings
3 modem settings
✹
➪
◆digital settings
1 preferred language gaelic
2 subtitles off
3 subtitles language
4 info display time long
5 timer alarm visual+audio
6 date and time 00:40
This menu enables you to adjust the digital, video and modem settings.
Digital settings
&Select viewing preferences in the main menu with the cursor up/down or
with the digit key 4.
éPress the SELECT/OK key.
The viewing preferences menu appears.
“Select digital settings with the cursor up/down or with the digit key 1.
‘Press the SELECT/OK key.
The digital settings menu appears.
(Use the cursor up/down to select a menu item and cursor left/right to adjust.
•preferred language: you can select a language preference for programmes
that have an alternative audio track: English,Welsch, Gaeilic or none.
If the selected language is available,theTV always plays your preferred
language.When your preferred language is not available,the default audio
language will be selected.
You can also use the Xkey under the door of the remote control to switch
between the available languages.
•subtitles:channels often transmit certain programmes with subtitling.
Select on or off.When selected on, the subtitles will be displayed if they are
available.
•subtitles language:you can select a language in which the subtitles will be
displayed when they are available.
On screen information usually indicates whether or not subtitles are available
for a programme.
Press the jkey on the remote control to switch subtitles on or off.
•info display time:you can set the length of time that on-screen information is
displayed:off,normal or long.
Note: if set to off, certain menus, including the channel list, will no longer appear on-
screen at all.
•timer alarm:select either visual or audio & visual.
The alarm gives a warning when a programme is about to start for which the
timer has been set.
When audio & visual is selected theTV will beep and display RED.
See Setting the timer, p.30.
•date and time: yourTV will automatically set the current date and time by
taking information from digital mode.If you wish to adjust these settings,you
can do so manually using the cursor left/right and the digit keys.
§Press the red key to return to the viewing preferences menu.
Viewing preferences

8Installation
✹
➪
◆viewing preferences
1 digital settings
2 video settings
3 modem settings
✹
➪
◆modem settings
1 modem internal
2 dialling pulse
3 connection direct
4 prefix 0
5 wait for dial tone yes
6 STD code no
7 prefix 011
✹
➪
◆subscription information
1 smartcard data
2 check your postbox
✹
➪
◆subscription information
1 smartcard data
2 check your postbox
✹
➪
◆postbox
✹
➪
◆smartcard data
rights ends on
ONdigital 1 99/12/27
See also Preparation,Card reader,p. 4.
Smartcard data
This option enables you to display the current expiry date of your
subscription account.
&Select subscription information in the main menu with the cursor up/down
or with the digit key 6.
éPress the SELECT/OK key.
“Select smartcard data and press the SELECT/OK key to display the current
expiry date of your subscription account.
‘Press the red key to return to the subscription information menu.
Check your postbox
Your television has the ability to display messages that have been sent to you
by a broadcaster, perhaps about a special offer or your current subscription
package.You will be advised when a message is waiting to be read by the
indication Post appearing on the screen when switching the television to
digital mode.
&Select subscription information in the main menu with the cursor up/down
or with the digit key 6.
éPress the SELECT/OK key.
“Select check your postbox and press the SELECT/OK key to display the most
recent message received.
‘Use the cursor up/down to select the previous messages.
Note: messages cannot be manually deleted, but the oldest messages are
automatically removed as new messages are received.
(Press the red key to return to the subscription information menu or press
the EXIT key to switch off the menus.
Subscription information
Modem settings
This menu enables you to adjust the modem settings.
&Select viewing preferences in the main menu and press the SELECT/OK key.
éSelect modem settings and press the SELECT/OK key.
“Select the modem settings one by one with the cursor up/down and change
the settings.
Your service provider will give you more details if necessary.
‘Press the EXIT key to switch off the menus.
Video settings
&Select viewing preferences in the main menu and press the SELECT/OK key.
éSelect video settings and press the SELECT/OK key.
“Use the cursor left/right to select the video standard:vhs or s-vhs + EasyLink.

9Installation
See p. 30.
See p. 31.
✹
◆technical information
1 signal strength
2 manufacturer data
3 auto update
✹
➪
◆manufacturer data
manufacturer PHILIPS
hardware version 00 01 0d 34
software version 00 80 70 11
manufacturer update 00 00 00 00
api version 00 12 a0 04
run version 00 07 03 0b
run update version 00 00 00 00
✹
➪
◆auto update
do you really want
to start a download
to update your
digital TV ?
✹
➪
◆signal strength
uhf channel number
signal strength ◆
good ◆
satisfactory ◆
poor ◆
➪
Parental lock
Setting the timer
The options contained within the technical information menu enable you to
check the status of your television.
This is not something you should need to do, apart from in the unlikely event
of a problem occurring with your television.
In this case, it will help the customer services people to understand the
problem and resolve it as quickly as possible.
&Select technical information in the main menu with the cursor up/down or
with the digit key 7.
éUse the cursor up/down or the corresponding digit key to select a menu item
and press the SELECT/OK key.
•signal strength:this option allows you to check the strength of the signal you
are receiving through your aerial.
•manufacturer data:this screen shows information about your television,such
as it’s manufacturer and the hard- and software versions it contains.
•auto update:this option can update the software used in your digitalTV.This
may update certain menus or functions of yourTV, as well as add new
features, but the general way in which theTV operates will not change.
Normally this type of update will be broadcast to your television like any
normal programme. You may be asked to start this update process by a
member of the ONdigital customer services team.
A message will be displayed asking you to confirm that you want to go ahead,
as it may change some of the personal settings you have made on yourTV,
such as locked or favourite channels.
“Follow the on screen instructions.
If you experience difficulties with this function and you are a current
ONdigital subscriber, please contact ONdigital customer services on
0870 600 9696.If you are not a subscriber but have difficulties,please call the
Philips digital help line on 0870 606 0117.
‘Press the EXIT key to switch the menus off.
Technical information

10 Installation
213
546
879
0
B
w
b
Ï
ji
TV VCR DVD SAT
DIGITAL
TEXTGUIDE
¬V P
0
SELECT
SETTINGS
OK
DIGITAL
SETUP
®Ò‡ π†
n
S
X®‡
Pf
yÚ
h
EXIT
INSTALLATION menu
activate
return or switch
main menu off
switch to
analogue mode
select menu
item
MENU TITLE
Subject 1
Subject 2
Subject 3
JSubject 4
Subject 5
Subject 6
JSubject 4 L M
o
œ
pπ
o
œ
pπ
After the new or extraTV channels have been
stored, theTV automatically transfers thoseTV
channels to the video recorder if it is equipped with
the EasyLink function. The message EasyLink :
downloading ...... appears on the screen. The
programme list of the video recorder is now the
same as the one of theTV. If the TV is connected
to a video recorder which supports the
NEXTVIEWLink function, theTV also automatically
transfers the language and country selections to the
video recorder.
Menu language
JINSTALLATION
MENU TITLE
United Kingdom
....
....
JCountry
MENU TITLE
English
....
....
JMenu language
First,select your language and country.
&Select Menu language and press the SELECT/OK key.
éSelect your language and press the SELECT/OK key.
Use the cursor up/down to scroll through the list and to bring up other
languages which are not displayed on the screen at present.
“Select Country and press the SELECT/OK key.
‘Select the country where you are now located and press the SELECT/OK
key.Use the cursor up/down to scroll through the list and bring up other
countries which are not displayed on the screen at present.
Select Other when none of the countries applies.
You can now search for and store theTV channels in two different ways:
using automatic installation or manual installation (tuning-in channel by
channel).
Select your choice and press the SELECT/OK key.
Select the menu language and country
StoreTV channels
&Use the cursor in the up/down,left/right directions to select a menu item.
“Press the SELECT/OK key to activate.
‘Use the SETTINGS key to return or to switch the menu off.
Note: the instructions on screen may help you to navigate through the menus and to
execute certain actions.Additionally information will be displayed about the selected
channel.
To use the menus
&Press the n key, if necessary,to switch theTV in analogue mode.
éOpen the door of the remote control.
“Press hand Xat the same time.
The analogue INSTALLATION menu appears on the screen.
Select the INSTALLATION menu
These menus enable you to make all the adjustments required to receive
analogue channels.
Tuning in the analogue channels