Philips Match Line 29PT9005 User manual

Contents
1
English
Your remote control 2
Preparation 3
Installation 4
Store TV channels 4
Select the menu language and country 4
Automatic installation 5
Manual installation 5
Give name 6
Reshuffle the programme list 6
Select favourite TV channels 6
Install TV setup 7-8
EasyLink features are based on the “one touch operation” approach.This
means that a sequence of actions are executed at the same time in both
the television and the video cassette recorder, provided both are fitted
with the EasyLink function and connected with the eurocable
supplied with your video recorder.
Installation
Operation
Use of the remote control 9-11
Use of the menus
Picture menu 12
Sound menu 12
Features menu 13
NEXTVIEW 14-18
Teletext 19-21
The keys on top of the TV 21
Connect peripheral equipment
Connecting and selecting equipment 22-25
Remote control functions for peripherals 25-26
Recording 27
Tips 28
Index 28
Glossary 29
4965.2 gb 19-01-2000 10:03 Page 1

Mha
SMART
PICTURE
ACTIVE
CONTROL
SMART
SOUND
213
546
879
0
B
w
®Ò‡π
†
æb
qÏ
i
Mqa
bQ
TV VCR DVD SAT
TUNER CD TAPE CDR
SMARTSMART
PICTURESOUND
¬V P
0
◊
MENU
U
XP
fh
OK
o
œ
pπ
®S
yÚ
INSTANT
ZOOM
2Preparation
Preparation
Your remote control
Teletext p. 20
Utime display/subpage selection
fsolution to puzzles
display PDC/VPS code
henlarge
Pno function
Smart Controls
Msmart sound p. 10
hactive control on/off p. 10
asmart picture p. 10
Bswitch to standby p. 9
ion screen info p. 9
0previous programme p. 9
◊video recorder/DVD function p. 9
Xbilingual choice/sound info p.11
TXT language group selection p. 19
EasyLink p. 11
®INSTANT recording
Sfreeze the picture p. 11
hold teletext page p. 20
bteletext on/off p. 19
Ïmain menu on/off p. 9
cursor to select
your choice p. 12
OK activate your choice
Installation p. 4
Vvolume up/down p. 9
¬sound mute p. 9
Pprogramme selection p. 9
Peripherals p. 25
wselection of EXT1,EXT2or
FRONT
TV, video recorder (VCR), DVD,
Satellite (SAT), TUNER,CD,TAPE or
cd-recordable (CDR) selection.
Colour keys
-NEXTVIEW selection p. 14
- direct teletext page or
subject selection p. 19
Audio- and Video equipment p. 25-26
Ono function
bno function
Qincredible surround p. 9
æNEXTVIEW/TXT programme
guide on/off p. 14
qpicture format p. 11
4965.2 gb 19-01-2000 10:03 Page 2

&Place the TV on a solid surface.
For ventilation, leave at least 5 cm free all around the TV.
Do not place the TV on a carpet.
To prevent any unsafe situations, do not place any objects on top of the TV.
Avoid heat, direct sunlight and exposure to rain or water.
éInsert the aerial plug firmly into the aerial socket at the back of the
TV.
“Insert the mains plug in the wall socket having a mains voltage of 220V-240V.
To prevent damaging the mains (AC) cord which could cause a fire or electric
shock, do not place the TV on the cord.
‘Remote control: Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R6-1.5V).
Press the TV key to be sure your remote control is in the TV mode.
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries exhausted batteries may not be disposed of with
your household waste. Please check on how to dispose of exhausted batteries
according to local regulations.
Note: this remote control functions with TVs which use the RC6 signalling standard.
(Switch the TV on : Press the power switch Aon the front of your TV.
A green indicator on the front of the TV lights up and the screen comes on.
If the indicator is red, press the -P+ key on the remote control.
The green lamp blinks every time you press a key on the remote control.
When you switch on your set for the first time, the menu LANGUAGE
automatically appears on the screen.The explanation appears in different languages
one at a time. Choose your own language and press the OK key on the remote
control.
Go on to page 4.
3Preparation
Preparation
CABLE
R6 / AA
B
w
æb
bQ
VCRTV DVD SAT
CDTUNER TAPE CDR
TV
4965.2 gb 19-01-2000 10:03 Page 3

4Installation
Store TV channels
After the new or extra TV channels have been stored, the TV automatically transfers
those TV channels to the video recorder if it is equipped with the EasyLink function.
The message EasyLink : downloading ...... appears on the screen. The
programme list of the video recorder is now the same as the one of the TV. If the TV
is connected to a video recorder which supports the NEXTVIEWLink function, the TV
also automatically transfers the language and country selections to the video
recorder.
First, select your language and country.
&Select Menu language and press the OK key in the centre of the cursor.
éSelect your language and press the OK key in the centre of the cursor.
Use the cursor up/down to scroll through the list and to bring up other
languages which are not displayed on the screen at present.
“Select Country and press the OK key in the centre of the cursor.
‘Select the country where you are now located and press the OK key in the
centre of the cursor.
Use the cursor up/down to scroll through the list and bring up other
countries which are not displayed on the screen at present.
Select Other when none of the countries applies.
You can now search for and store the TV channels in two different ways:
using automatic installation or manual installation (tuning-in channel by
channel).
Select your choice and press the OK key in the centre of the cursor.
Select the menu language and country
MENU TITLE
Menu language
Country
Automatic Installation
JINSTALLATION
MENU TITLE
United Kingdom
....
....
JCountry
MENU TITLE
English
....
....
JMenu language
&Open the door of the remote control.
éPress Uand fat the same time.
Installation
Select the INSTALLATION menu
&Use the cursor in the up/down, left/right directions to select a menu item.
éPress the OK key in the centre of the cursor to activate.
“Use the Ïkey to return or to switch the menu off.
To use the menus
MENU TITLE
Subject 1
Subject 2
Subject 3
JSubject 4
Subject 5
Subject 6
JSubject 4 L M
o
œ
pπ
o
œ
pπ
OK OK
213
546
879
0
i
¬V P
0
◊
U
X®SP
fh
INSTANT
ZOOM
yÚ
213
B
w
æb
qÏ
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
bQ
MENU
select menu item
return or switch
main menu off
activate
4965.2 gb 19-01-2000 10:03 Page 4

Searching for and storing TV channels is done channel by channel.
You must go through every step of the Manual installation menu.
Selection mode is only present and lights up if the country selected also
offers the channel option (C-channels for aerial channels, S-channels for cable
channels).
You can choose either channel or frequency mode.
&Select the TV system
Select the country or part of the world from where you want to receive the
TV channel.
If you are connected to a cable system, select your country or part of the
world where you are now located.
éPress the cursor down and enter the programme number with the digit keys.
“Search for a TV channel
Press the cursor left/right.
The frequency or the channel number increases until a TV channel is found.
Direct selection of aTV channel
If you know the frequency, the C- or S-channel number, enter it directly with
the digit keys 0 to 9.
Ask for a list from your cable company or dealer, alternatively consult the
Table of frequencies on the inside backcover of this handbook.
‘Fine tune
In case of poor reception, you can improve the reception by adjusting the
frequency with the cursor left/right.
(To store your TV channel, select Store and press the OK key in the centre of
the cursor.
Repeat steps &to (to store another TV channel.
§To exit from the menu press the Ïkey on the remote control.
In the Automatic installation menu select Start and press the OK key in the
centre of the cursor to activate the searching. All TV channels are searched
for and stored automatically.
If a cable system which broadcasts ACI (Automatic Channel Installation) or a
TV channel transmitting a teletext page with the frequencies and programme
names of all the TV channels which can be received, is detected, the search is
stopped and a programme list appears.
The programme list is automatically filled with all the programme numbers
and names of the TV channels transmitted.
It is possible that the cable company or the TV channel displays a broadcast
selection menu. Layout and items are defined by the cable company or the TV channel.
Make your choice with the cursor and press the OK key in the centre of the cursor.
To exit from the menu press the Ïkey on the remote control.
Go on to page 6.
5Installation
Manual installation
Automatic installation
Automatic installation
Start
Stop
TV is searching
One moment please ...
JStop K
Automatic installation
Start
Stop
1 BBC1
2 BBC2
3 CNN
....
....
JStart K
Manual installation
(Selection mode)
System
Programme no.
Search
Fine tune
Store
JSystem K
4965.2 gb 19-01-2000 10:03 Page 5

6Installation
Give name
It is possible to change the name stored in the memory or to assign a name
to a TV channel which has not yet been entered.A name with up to 5 letters
or numbers can be given to the programme numbers 0 to 99. For example
SUPER, BBC1,... Between 99 and 0 you can also name any peripherals that
are connected to a euroconnector.
&Select Give name in the INSTALLATION menu and press the OK key in the
centre of the cursor.
éSelect the programme number.
“Press the OK key in the centre of the cursor.
‘Select the character with the cursor up/down.
(Select the following position with the cursor right.
§Select the following character.
èPress the OK key in the centre of the cursor when finished.
!Press the Ïkey to return to the INSTALLATION menu.
Space, numbers and other special characters are located between Z and A.
According to your preference you can change the order of the stored TV
channels.
&Select Reshuffle in the INSTALLATION menu and press the OK key in the
centre of the cursor.
éSelect the programme number you want to exchange.
“Press the OK key in the centre of the cursor.
‘Select the new number you want to exchange it with.
(Press the OK key in the centre of the cursor.
Repeat the operation until all TV channels are allocated as you like.
§Press the Ïkey to return to the INSTALLATION menu.
Reshuffle the programme list
After leaving the installation you can browse through the TV channels by
pressing the - P + key. Only those TV channels which are in the favourite list
will be displayed. Non-favourite TV channels can still be selected with the digit
keys. By default all stored channels are added to the favourite list.
&Select Favourite programmes in the INSTALLATION menu and press
the OK key in the centre of the cursor.
éSelect your favourite programme number.
“Select Yes or No with the cursor left/right.
‘Repeat for every TV channel you want to make a favourite or a
non-favourite TV channel.
(Press the Ïkey to return to the INSTALLATION menu.
In order for NEXTVIEW to function properly, the first TV channel from the favourite list
should also broadcast the correct local date and time via teletext.
Select FavouriteTV channels
INSTALLATION
Menu language
Country
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
SETUP
JGive name
Give name
EXT1
EXT2
FRONT
0
1 BBC1
2 BBC2
3 ....
4 ....
5 ....
J0
Reshuffle
EXT1
EXT2
FRONT
0
1 CNN
2 BBC2
3 ....
4 ....
5 ....
J1 CNN
Favourite programmes
0 ... No
1 ... Yes
2 ... No
3 .... No
4 .... Yes
5 ....
J2 ... Yes
4965.2 gb 19-01-2000 10:03 Page 6

7Installation
The Setup menu allows you to adjust initial settings, i.e. those which are not
related to the installation of the TV channels.
The Setup menu contains items that control the settings of the TV’s functions,
features, services and peripherals you may have connected.
&Use the cursor in the up/down, left/right directions to select the menu item.
éUse the OK key to activate.
“Use the Ïkey to return or switch menu off.
Digital sources
See Connect Peripheral Equipment, p. 23 to connect your digital equipment,
like a DVD, a digital satellite tuner or a similar digital device.
Define Decoder/Descrambler programme numbers
If a decoder or a descrambler is connected, see p. 22 you can define one or
more programme numbers as decoder programme numbers.
Press the cursor left/right to select the input used to connect to your
decoder Off,EXT1 or EXT2.
Select Off if you do not want the selected programme number being
activated as a decoder programme number.
Select EXT2 when the decoder is connected to your EasyLink video recorder.
When selecting the decoder, the message EasyLink: downloading presets....
appears on the screen.
Information line
Select On and after the selection of a TV programme or after pressing the
ikey on the remote control, a TV channel which broadcasts teletext may
transmit the name of the TV channel, the programme name or another
message.This is displayed on screen next to information about sound and
picture format.
When selected Off, only sound and picture format information is displayed
after the selection of a TV channel or after pressing the ikey.
Factory settings
Select Factory settings and press the OK key to restore picture and sound
settings, predefined in the factory.
Install TV Setup
INSTALLATION
Menu language
Country
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
SETUP
JSETUP
Decoder/Descrambler
Programme
Decoder status
JProgramme
SETUP
Digital Sources
Decoder/Descrambler
Information line
Factory settings
NEX TV IEW provider none, 0...99
INSTALLATION
JDigital sources
4965.2 gb 19-01-2000 10:03 Page 7

8Installation
NEXTVIEW provider
Most broadcasters in Europe are offering teletext pages containing the day’s
programme schedule.These pages can be requested by switching the TV to
Teletext Guide.
An increasing number of broadcasters are offering an extended programme
guide service called NEXTVIEW.
NEXTVIEW is a new way of presenting programme schedules and offers more
features than basic teletext.With NEXTVIEW it is possible to show for instance
all the movies or children programmes for tonight or the following days.
If you select None as NEXTVIEW provider, the TV will capture all data from
the available TV channels which broadcast NEXTVIEW. Broadcaster defined
menus will not be available.
If you select a programme number of a TV channel stored in the favourite list
as NEXTVIEW provider, the selected TV channel will provide NEXTVIEW data
and additional information of its own broadcasts as well as from other (non
selected) TV channels.
Normally you will select the NEXTVIEW provider that transmits most
information in your language.You can make the best selection via information
from TV announcements or from the newspapers.
Important:
In order for NEXTVIEW to function properly, the first TV channel from the favourite list
should also broadcast the correct local date and time via teletext.
Please check at startup if the time and date are correct in the NEXTVIEW screen.
Remark:
Not all TV channels support NEXTVIEW.
How to make use of NEXTVIEW, see p. 14.
Installation
Select Installation and press the OK key to return immediately to the
INSTALLATION menu.
‘To exit from the menu press the Ïkey repeatedly.
SETUP
Digital Sources
Decoder/Descrambler
Information line
Factory settings
NEX TV IEW provider none, 0...99
INSTALLATION
J NEX TV IEW provider none/o...99
4965.2 gb 19-01-2000 10:03 Page 8

9Use of the remote control
Operation
Use of the remote control
Mha
SMARTACTIVESMART
PICTURESOUND
213
546
879
0
B
w
®Ò‡π
†
æb
qÏ
i
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
◊
bQ
MENU
wSelect peripherals
Press this key repeatedly to select EXT1,
EXT2 or FRONT, according to where you
connected the peripherals (p. 25).
TV VCR DVD SAT TUNER CD TAPE CDR
Press one of these keys to use the remote
control directly in the TV, video recorder,
DVD or satellite mode. A green indicator
lights up. Press the same key again within 3
seconds to use the remote control in the
mode indicated below the key (tuner, CD,
tape or CD-recordable).
A red indicator lights up.
Press the key again to return to the function
mentioned above the key.
BStandby
The set is switched off and the red indicator
(orange when acquiring NEXTVIEW
information) lights up.When acquiring
NEXTVIEW the TV is switched to full standby
after a period of max. 1 hour and the red
indicator lights up.
To switch the TV on again, press - P + or the
digit keys.
If your EasyLink video recorder has the
system standby function and you press the
standby key for 3 seconds, both the TV and
video recorder are switched to standby.
®Ò‡π†Video recorder see p. 25
æNEXTVIEW/TXT programme guide
on/off see p. 14
iScreen information
Press for 5 seconds to activate/de-activate
the extended or reduced display of TV
channel and programme information on the
screen.
Press briefly to display information about the
selected TV channel and programme, the
sound reception, picture settings and the
remaining time set with the sleeptimer.
0/9 Digit keys
To select a TV channel.
For a two digit programme number, enter the
second digit within 2 seconds.
To switch immediately to a selected one digit
TV channel, keep the digit key pressed a bit
longer.
0Previous programme
The previously selected TV channel is displayed.
The ◊indication is only video recorder/DVD.
Use of the remote control
bTeletext on/off see p. 19
ÏMain menu on/off see p. 12
VVolume
Press + or - to adjust the volume.
¬ Mute
Temporarily interrupt the sound or restore
it.
PProgramme selection
To browse through the TV channels
activated in the Favourite Programme menu.
QIncredible Surround
In MONO sound mode, this feature, when
switched on, enables you to hear a spatial
effect of sound.
In STEREO sound mode, when Incredible
Surround On is selected, it seems as though
the loudspeakers are spread further apart
from one another
4965.2 gb 19-01-2000 10:03 Page 9

10 Use of the remote control
Mah
213
546
879
0
B
w
®Ò‡π
†
æb
qÏ
i
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
◊
bQ
SMART
PICTURE
SMART
SOUND
ACTIVE
CONTROL
MENU
hActive control
Active control is a pro-active and automatic
system.The TV continuously measures and
corrects all incoming signals in order to
provide the best picture possible.
Press the hkey to select the Active
Control values Off or On.
Off Sharpness and Dynamic Contrast are
controlled automatically
On Sharpness, Dynamic Contrast and Noise
Reduction are controlled automatically.
Press the cursor in the up/down directions
while the selected Active Control setting
information is on top of the screen.
The Active Control menu appears.
The picture settings are being adapted
continuously and automatically.
The menu items cannot be selected.
Press the cursor in the up/down directions
again to switch off the menu.
bno function
Smart Keys
To select predefined picture and sound
settings.
M Smart Sound
Each time it is pressed, a different sound
setting is selected, corresponding with
specific factory setting of treble and bass.
aSmart Picture
Each time it is pressed, a different picture
setting is selected, corresponding with
specific factory settings of Contrast, Colour,
Sharpness and Dynamic Contrast.
Personal refers to the personal preference
settings of picture and sound selected in the
picture and sound menu.
Remark: the moment you are in a predefined
smart sound or picture setting and you modify a
setting in the picture or sound menu, all values of
the menu will overwrite the previously made
settings.
4965.2 gb 19-01-2000 10:03 Page 10

11Use of the remote control
213
546
879
0
B
w
®Ò‡π
†
æb
Sj
i
cd
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
◊
U
X®SP
fh
INSTANT
ZOOM
yÚ
®Ò‡π
†
XBilingual choice and
sound mode selection
Press this key
•to switch from Stereo to Mono sound, in
case of stereo transmission, or from
Nicam Stereo to Nicam available, in case
of digital transmission;
•to choose between language Y(Dual Y) or
language Z(Dual Z), in case of bilingual
transmission.The setting is separately
stored for each TV channel.
®Instant record
If your video recorder has the EasyLink
function the INSTANT ®key for record can
be operated in the TV mode.
SFreeze
To activate/de-activate the frozen picture or
to hold a teletext page.
Pno function
UTime display
The time, downloaded from the TV channel (with teletext)
stored on programme number 1 or the lowest favourite
programme number, is displayed on the screen.
This function is not available when continuous subtitles have been
switched on.
SUfh Teletext functions
see p. 20
qPicture format
Press this key to switch to a wide screen
format.
A black bar appears at the top and the
bottom of the screen.
The TV has an automatic switching function via
eurocable. Video recorders or programmes
carrying special signals will automatically switch
the TV to the correct screen format, if connected
with a eurocable.
Select TV channels by theme
If programmes in the TV guide of NEXTVIEW
have defined themes, it is possible to quickly
select TV programmes with the coloured
keys.
&Press the red, green, yellow or blue key
to select one of the four predefined
theme categories MOVIES,SPORTS,
CHILDREN,NEWS.
The TV switches to the first TV channel
broadcasting a programme of the
selected theme. At the same time a list
of all the TV channels currently
transmitting a programme of the selected
theme appears on the screen.
éUse the cursor up/down to select a TV
channel.
“Press the same colour key again to
remove the list.
‘Under the white key you can programme
your own theme category.
(Default; the theme category Shows has
been preprogrammed in the factory.)
Press the cursor up and select a
preferred theme from the theme list
with the cursor left/right.
From now on the selected theme
category is stored under the white key.
A list of all the TV channels currently
transmitting a programme of the selected
theme appears on the screen.
4965.2 gb 19-01-2000 10:03 Page 11

12 Use of the menus
&Press the Ïkey to display/cancel the MAIN MENU.
éUse the cursor in the up/down directions to select the PICTURE,SOUND or
FEATURES menu or to select the PROGRAMMES.
“Press the cursor right to activate the selected menu.
‘Use the cursor in the up/down, left/right directions to select the menu item.
(Use the OK key in the centre of the cursor to activate.
§Press the Ïkey repeatedly to return or to switch the menu off.
Picture menu
If an NTSC peripheral is connected to one of the euroconnectors, the option Hue
also appears.
Tint
Select the colour temperature: Normal,Warm or Cool.
Digital Scan (Line Flicker Reduction)
In rare circumstances while watching TV programmes it may be preferable to
switch off the digital scan line flicker reduction. Normally keep it switched on.
Press the cursor left/right to select On of Off.
Dynamic Contrast
To make the contrast in the darker and the brighter picture areas more
noticeable, select the Med setting.
In certain circumstances it may be preferred to select Min, Max or Off.
The modified adjustments for Contrast, Brightness, Colour, Sharpness,Tint,
Digital Scan and Dynamic Contrast are automatically stored for all TV
channels.
Select Factory settings in the Setup menu to restore the predefined factory
settings, see p. 7.
Sound menu
The modified adjustments for Volume, Balance,Treble and Bass are
automatically stored for all TV channels.
Select Factory settings in the Setup menu to restore the predefined factory
settings, see p. 7.
Headphone volume
See Connect Peripheral Equipment, p. 24 for the connection of the
headphone.
Press the Ï key to return to the SOUND menu.
Use of the menus
PICTURE
Contrast
Brightness
Colour
Sharpness
Tint
Digital Scan
Dynamic Contrast
JContrast L M
MAIN MENU
Contrast
SOUND
FEATURES
PROGRAMMES
JPICTURE
OK key to activate
cursor to select
adjustments
return or switch
main menu on/off
213
546
B
w
æb
qÏ
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
bQ
MENU
SOUND
Volume
Balance
Treble
Bass
Headphone volume
JVolume L M
4965.2 gb 19-01-2000 10:03 Page 12

13Use of the menus
Features menu
&Press the Ïkey to display/cancel the MAIN MENU.
éUse the cursor in the up/down directions to select the FEATURES menu.
“Press the cursor right to activate the selected menu.
‘Use the cursor in the up/down directions to select a menu item.
(Use the cursor in the left/right directions to select the desired setting.
Sleeptimer
With the sleeptimer you can set a time period after which the TV should
switch itself to standby.
The counter runs from Off up to 180 min.
One minute before the TV is set to go to standby, the remaining seconds
appear on screen.You can always switch off your set earlier or change the set
time.
Child lock
If the child lock is on, the TV can only be switched on with the remote
control.The P- and + keys on top of the TV cannot be used to select a TV
channel. In this way you can prevent unauthorised use of your TV.
If the message Child lock On appears, the child lock must be switched off
before you can use the P- and + keys on top of the TV to select a TV
channel.
Subtitle
TV channels with teletext often transmit certain programmes with subtitling.
See Teletext, Continuous Subtitles, p. 21 how to select the proper subtitle
page from the teletext index.
Select Subtitle On or Off.
Press the Ïkey to switch off the Features menu.
Programme list
&Press the Ïkey to display/cancel the MAIN MENU.
éSelect PROGRAMMES with the cursor up/down.
“Press the cursor right to display an overview of all the TV channels installed.
‘Press the cursor up/down to run through the list and press OK in the centre
of the cursor to select the desired TV channel.
(Press the Ïkey to switch off the Programme list.
Sleeptimer Off
Child lock Off
Subtitle Off
JFEATURES
OK key to activate
cursor to select
adjustments
return or switch
main menu on/off
213
B
w
æb
qÏ
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
bQ
MENU
4965.2 gb 19-01-2000 10:03 Page 13

14 NEXTVIEW
In the Setup menu, p. 8 you were asked to select a NEXTVIEW provider.
If the selected provider supports NEXTVIEW then the TV will automatically
present the NEXTVIEW programme schedule. If the TV channel supports just
teletext, then the TV will switch automatically to Teletext Guide.
Both facilities are offering the same functions: record, remind, info and watch.
However in case of Teletext Guide the broadcaster is responsible for the
availability of these functions.
Some broadcasters provide information about their own programmes and
sometimes other TV channels for one or more days.You can search for the
programmes you want to watch up to 7 days in advance. It is also possible to
search for a programme by theme, e.g. sport, movie, etc. Once a programme
has been selected it can be tagged, to remind you, or to record on the video
recorder automatically (provided the video recorder is equipped with
NEXTVIEWLink), once, daily, weekly or series.
Teletext Guide/NEXTVIEW also allows direct access to detailed information
about programmes if provided by the broadcaster.
The broadcaster is responsible for the content of the information.
The TV is responsible for the capture of that information and for the presentation to
the user.
Use of the Teletext Guide/NEXTVIEW menus
&Press the ækey on the remote control to display/cancel the Teletext Guide/
NEXTVIEW menu.
éUse the cursor in the up/down, left/right directions to select the date, DAY
for the daily guide and the time block (in steps of 15 minutes), CHANNEL for
the channel guide, THEME for the theme guide, OVERVIEW for an overview
of all the programmes which are marked as reminders or for recording, the
programme guide page number or to enter the programme list.
NEXTVIEW / Teletext Guide
Teletext Guide NEXTVIEW
“Enter the proper programme guide page number
with the digit keys or with the – P + keys.
‘Press the cursor left/right to run through the
subpages.
(Select a programme with the cursor up/down.
§Press one of the colour keys to select one of the
basic functions (if available); record,remind,watch,
info. See Basic functions further on.
èPress the OK key in the centre of the cursor to
return to the header area again.
“Select a programme with the cursor up/down.
‘Press one of the colour keys to select one of the
basic functions (if available); record,remind,watch,
info. See Basic functions further on.
(Press the OK key in the centre of the cursor to
return to the header area again.
OK key
to activate
cursor to select
adjustments
213
546
879
B
w
æb
qÏ
bQ
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
MENU
æ
NEXTVIEW
selection
Menu Day Channel Theme Overview
BBC1 BBC2
p.202 p 01 02 ... π
BBC1
11.03 ................
14.35 ................ 226/3
17.50 ................ 231
Record
Remind
Info
Watch
Monday 9 Oct 18:03
Menu Day Channel Theme Overview
CNN BBC1 BBC2
BBC1
NEX TV IEW
What’s on now
Preview
Themes
Ratings
Record
Remind
Info
Watch
4965.2 gb 19-01-2000 10:03 Page 14

15NEXTVIEW
Teletext guide
TV channels which broadcast teletext also transmit a page with the
programme guide of the day. For each selected TV channel the programme
guide page can be selected with the ækey:
- automatically if the selected TV channel supports services like PDC
(Programme Delivery Control) or MIP (Magazine Inventory Page).
- if automatic pre-selection is not possible then the index page is displayed
and the proper programme guide page number of the selected TV channel
has to be entered with the digit keys.
The programme guide page will be stored automatically only if it satisfies
Video Programming via Teletext (VPT) requirements.
Every time you press the ækey, the programme guide page of the
selected TV channel will be available if the TV channel does not support
NEXTVIEW.
The function items record, remind, info and watch, corresponding with the
coloured keys, become highlighted if the displayed programme page satisfies
the Video Programming via Teletext (VPT) requirements. Select a programme
item and press one of the function keys, e.g. Record or Remind. See Basic
functions further on.
The Info item is enabled if the selected programme contains a page number
with an optional subcode referring to a page with more info about the
programme.
NEXTVIEW modes to sort and represent information
Menu
If in the Setup menu, see p. 8, you have selected a TV channel as NEXTVIEW
provider which also supports NEXTVIEW.NEXTVIEW menu is displayed or can
be selected.The selected TV channel is responsible for this menu.
The NEXTVIEW menu appears when NEXTVIEW is switched on.
Use the cursor up/down to select a menu item.
Use the cursor right to select the menu item.
While going through the menus, the TV is collecting the sorting criteria to
finally display a list of programme events.
The functions, in the left column, are shown at reduced brightness as long as
the menu is displayed.
If None has been selected as NEXTVIEW provider in the Setup menu, the
broadcaster’s defined menu will not be available.
Menu Day Channel Theme Overview
BBC 2
p.202 p 01 02 ... π
BBC 2
11.03 ................
14.35 ................ 226/3
17.50 ................ 231
One moment please
Record
Remind
Info
Watch
Monday 9 Oct 18:03
Menu
BBC1
NEX TV IEW
What’s on now
Preview
Themes
Ratings
Record
Remind
Info
Watch
4965.2 gb 19-01-2000 10:03 Page 15

16 NEXTVIEW
Day
The day guide provides an overview of all programme titles active in the
selected time block.Time blocks are 15 minute intervals starting from the
current time of the current day.
The default order is based on the programme list of the favourite TV channels
as stored in the installation of the TV.TV channels not marked as favourite TV
channels will not appear.
Default NEXTVIEW opens with the day screen if the broadcast does not have
its own menu.
Channel
The Channel guide provides an overview of all programmes that are
broadcast by a single channel during one day.
Previous programmes can be made visible via cursor up.
The list will start with the earliest broadcast programme.
With cursor left/right another favourite TV channel can be selected.
Theme
The theme guide displays a list of all programmes at the selected date, that
matches with the selected category (news, sport, culture, movies, …).
The default starting item will be the current or next programme on the
current TV channel.
The THEME selection is only present if programmes in the TV guide have
defined themes.
Overview
The Overview menu provides a list of programmes that are marked as
reminders and those that have to be recorded.
When more than one programme to be recorded has an overlap in time,
these programmes will be marked by a red colour.
After the programme has been broadcast, all items set for once will be
deleted from the list the following day.This menu can be used to change a
reminder or programmes to be recorded.
Note: the TV will automatically interpret the broadcast time (as shown on the
teletext guide) of your selected programme into the correct local time and
date.
Monday 9 Oct 18:03
Channel
CNN BBC1 BBC2
BBC1
NEX TV IEW
........
........
........
Record
Remind
Info
Watch
Monday 9 Oct 18:03
Theme
Series Movies News
BBC1
NEX TV IEW
BBC1
CNN
TVE
Record
Remind
Info
Watch
Monday 9 Oct 18:03
Overview
BBC1
NEX TV IEW
BBC1 17.10 .............
CNN 17.30 .............
TVE 18.05 .............
BBC2 19.00 .............
Record
Remind
Info
Watch
Record
Remind
Info
Watch
Info block
Monday 9 Oct 18:03
Day
p I18.03-18.15 π 18.30
BBC1
NEX TV IEW
Jchannel - start - prog.
4965.2 gb 19-01-2000 10:03 Page 16

17NEXTVIEW
Basic functions
The functions Record, Remind, Info and Watch can be activated with the
corresponding colour keys on the remote control.
If the function is not available, then the text is shown at reduced brightness.
Select a programme with the cursor up/down.
Record Ror Remind !
&Press the red colour key to activate Record or the green colour key to
activate Remind.
If the programme number of the broadcaster is not yet known, a message appears
with the request to input the right number.
A small menu pops up in which you can choose the interval: once, daily or
weekly, or clear an earlier made record or remind setting.The default interval
is set to Once. If a programme is an episode of a series, it is identified by the
system and the options daily and weekly are replaced by the option series.In
this case the system identifies when the next episode of the series will be
broadcast.This is not possible in the Teletext guide.
éUse the cursor in the left/right directions to select the interval.
The colour of the tag refers to the interval.
“Press the OK key in the centre of the cursor.
When Record Ris activated:
Storing is displayed to indicate the video recorder is programmed.
When Remind !is activated:
- a message will be displayed the moment the tagged programme
with !starts, when watching the TV later on.
- the TV switches on the moment the tagged programme with !starts,
when the TV is in standby.
Note: Recordings and reminders are not possible when the broadcaster does not
transmit dates and times of the programmes.
The message No TV programming possible appears.
Make sure you are on the TV programming page.
Info
&Press the yellow colour key to activate Info.
Advertisements or information relating to the selected programme are
displayed. In some cases all of the information does not fit on the screen. Use
the cursor up/down to browse through all the information.
éPress the yellow colour key again to switch off the information.
Watch
Press the blue colour key to activate Watch.
This function is only available if a currently broadcast programme is selected.
Otherwise the function is not available.
The selection causes the TV to tune to the selected TV channel. NEXTVIEW is
switched off.
Record
Remind
Info
Watch
Info block
Date Time
Channel
CNN BBC1 BBC2
BBC1
NEX TV IEW
11.03 Travel Guide
14.35 World news
17.50 Insight
R
!
p Once π Daily Weekly Clear
4965.2 gb 19-01-2000 10:03 Page 17

18 NEXTVIEW
Acquisition and updating of NEXTVIEW information
Acquisition and updating of NEXTVIEW is done when you are watching the TV
channel of the selected NEXTVIEW provider, see Setup menu p. 8, or when the
TV is switched to standby.
The indicator on the front of the TV remains orange during standby.
After all needed acquisition or updating is complete, it turns red.
Acquisition of fresh data will happen once during the night.
Note: it may be necessary to put the TV in standby mode when all NEXTVIEW
information is outdated, e.g. returning from holiday.
Video recorder restrictions with NEXTVIEW
The Record item and the automatic recording will only be present and
possible if your video recorder is equipped with NEXTVIEWLink.
Your video recorder should be connected to EXTERNAL 2. See Connect
Peripheral Equipment, p. 22.
The daily, weekly and series options, the number of recordings set and the
way overlapping recordings are managed, depend on the type of video
recorder you have.When all video recorder timers are full, the item Record
in the menu will not be present.
Upload video recorder overview (only with Philips sets)
When the TV is switched on, the timer recordings are uploaded to the TV to
check if any manual addition or deletions have been done.This is shown in the
overview.
The video recorder manages and removes timer recordings when performed.
Some NEXTVIEWLink video recorders do not allow a daily programming of the
recording to start on a Saturday or Sunday. In this case the item daily will be
removed from the menu on those days.
4965.2 gb 19-01-2000 10:03 Page 18

19Teletext
Most TV channels broadcast information via teletext.
Each channel which broadcasts teletext transmits a page with information on
how to use its teletext system. Look for the teletext page with the main
index (usually p. 100).
Depending on the TV channel, teletext is transmitted in different systems.
The colours used in the options line correspond with the colour keys of your
remote control.
About Easy Text
Easy Text considerably reduces the waiting time (on condition that the
teletext broadcast of the particular TV channel is received for at least half a
minute) by :
•a direct selection of previous and following pages which are in transmission
and of the pages referred to in the options line
•a habit watcher list: frequently used pages are put automatically in a list of
preferred pages, so that they are immediately available
•the precapturing of the page numbers referred to in the displayed page
•the precapturing of all the subpages.
Switch Teletext on and off
Press bto switch the teletext on or off.
The main index page appears on the screen together with two information
lines at the top and one option line at the bottom of the screen.
Remark: if the displayed teletext characters on screen do not correspond with the
characters used in your language, press the Xkey, under the door of the remote
control, repeatedly to select Language group 1 or 2.
Select a Teletext page
With the digit keys
Enter the desired page number with the digit keys.
The page counter seeks the page or the page appears immediately when the
page number has been stored in the memory.
A message appears when you have entered a non existent or incorrect page
number. Page numbers beginning with 0 or 9 do not exist. Choose another number.
With the option line
Select with the colour keys, corresponding to the coloured options at the
bottom of the screen, the desired subject.
Quickly run through the teletext pages
Press the cursor up/down or the - P + key to run through the previous or
the following pages.
Select the previously selected txt page
Press the 0key.
Teletext
cursor to select
pages
colour keys to
select
213
546
879
0
B
w
æb
qÏ
i
bQ
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
◊
MENU
b
0
X
U
X®SP
fh
INSTANT
ZOOM
yÚ
4965.2 gb 19-01-2000 10:03 Page 19

20 Teletext
Select the index teletext page
Press the white colour key to display the main index (usually p.100).
Only for T.O.P teletext broadcasts :
T.O.P orders the pages in categories and adds other possibilities of enhancing
ease of use.
Press i. A T.O.P. overview of the teletext subjects available is displayed.
Not all TV channels broadcast T.O.P. teletext.When the teletext system
is not T.O.P. teletext, a message appears at the top of the screen.
Select with the cursor up/down, left/right the desired subject and press the
OK key in the centre of the cursor.
Select subpages
When a selected teletext page consists of different subpages, one of the
subpages appears on the screen.
The coloured number in the first information line refers to the displayed
subpage.
The other subpages can be selected in 2 ways :
With the cursor left/right
The other subpage numbers appear in white as soon as the transmission has
found them.They are stored in the memory so that they are available while
the teletext page is on screen.
Select with the cursor left/right the previous or the following subpage.
With the Ukey
•Enter the subpage number yourself:
Press U. Enter the desired subpage with the digit keys : e.g. 3 for the third
page of seven subpages.
The TV searches for the selected subpage.
•Automatically rotating subpages:
Press Uagain to cancel the entered digit key for the subpage.
Now the subpages rotate automatically.
Press Uagain to select the subpages with the cursor left/right again.
Special teletext functions
Hold
Press Sto stop the automatically rotating of the subpages or to stop the
page counter from seeking when you have entered a wrong page number or
when the page is not available.
Enter another page number.
Enlarge
Press hrepeatedly to display the upper part, the lower part and then to
return to the normal page size.When the upper part is displayed, you can
scroll the text, line by line using the cursor up/down.
Reveal
Press fto reveal/conceal the hidden information, such as solutions to
riddles and puzzles.
cursor to select
subpages
OK to activate
213
546
879
0
B
w
æb
qÏ
i
bQ
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
◊
MENU
ZOOM
yÚ
U
X®SP
fh
INSTANT S
U
f
h
i
4965.2 gb 19-01-2000 10:03 Page 20