Philips FC8654/01 User manual

Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
ServiceManual
Philips Consumer Lifestyle
Vacuum cleaner
FC8654/01
15/05 Version 1.4
PRODUCT INFORMATION
• This product meets the requirements regarding
interference suppression on radio and TV.
• After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
• Colour : Full Red
• Input Power (IEC) : 1800 W
• Suction Power : 425 W
• Noise level : 82 dBA
• Dustcapacity : 4 L
• Filtration : HEPA 10 Filter
• Cord length : 6 m
• Action Radius : 9 m
• Connection : Conical
• Dimensions : 44 x 30 x 20 cm
• Weight : 5 kg
ACCESSORIES
• Standard nozzle : Multi-purpose Nozzle
• Tube : Metal 2-piece telescopic tube
• Accessories : Crevice nozzle and Small nozzle
REPAIR INSTRUCTION
• No specific issues
OPTIONAL (accessories)
• Smart Cleaning Kit 4322 004 25481
• Filter assy FC8059/01

FC8654/01
2-8
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
• First remove the dust bag.
• To replace the Valve assy (10), turn the appliance upside
down and remove bottom plate (16) by removing
screwD. Now by using a screwdriver the valve assy can
be removed (see picture).
D
• Remove the dustcover assy (1) using a screwdriver
(see picture).
• To disassemble the Back housing (9):
Remove the 4 screws B. (see exploded view).
To reach the 2 screws on the back, first remove the
On/Off button (12) and the small panel, which has 4
snap locks! (see pictures).
1
2
• Disconnect the connector from the potmeter PCBA.
• To remove the Turning knob (8) & Potmeter PCBA:
Turn the Back housing upside down and remove the 2
screws C. The potmeter PCBA can now be removed
and replaced.
• Turning knob (8) can be pushed to the outside with a
screwdriver.
• The On/Off switch (20) can be replaced by unplugging
the two wires.
• To replace the main PCBA (19) remove the small 2
screwsE(see exploded view)
• The Cordwinder (17) can be removed by pulling it
in upwards direction and unplugging the two wires,
the Cordwinder can replaced by placing it back in the
opposite direction.
• To replace the Motor assy (22):
Disassemble the Motor housing (21) by removing the 4
screws F(see exploded view).

FC8654/01
3-8
M
AC
220 - 240V
50Hz
R5
27-¼W
U1
TR1
Motor
TMP
R3
10M-¼W
R4
10M-¼W
L
N
C1
0.47F
275V
C3
100nF
C4
100nF
ZD1
4.7V
½ W
C2
330F
16V
D1
1N4007
R2
10k-1W
R1
10k-1W
RW
47k
K
4
1
3
2
12 13
14
R7
1k
PARTS LIST
ELECTRICAL DIAGRAM
Pos Service code Description Remark
1
2
3
4
5
9965 100 68363
9965 100 68384
9965 100 68376
9965 100 68356
4322 004 93931
Dust cover assy
Dust cover lock
Dustbag holder
DBFI assy (Red)
Motor inlet lter
Full Red 20920
Full Red 20920
Basic Blue 61192
Atlas
6
7
8
9
10
9965 100 68372
9965 100 68381
9965 100 68373
9965 100 68367
9965 100 68355
Motor inlet lter frame
Cordwinder button
Turning knob
Back housing
Valve assy
Deep Black 80231
Deep Black 80231
Deep Black 80231
Full Red 20920
11
12
13
14
15
9965 100 68357
9965 100 68379
9965 100 68374
4322 004 93941
9965 100 62294
Casterdish assy
On/Off button
Exhaust lter frame
HEPA 10 lter
Rear wheel assy
Deep Black 80231
Deep Black 80231
Deep Black 80231
Atlas
16
17
18
19
20
9965 100 68378
4322 005 34991
9965 100 68377
4322 006 25051
9965 100 60949
Bottom housing plate
Cordwinder 6 m round cord
Bottom housing
PCBA
Switch
Deep Black 80231
4.8 Plug Atlas
Deep Black 80231
220 - 230 V Atlas
21
22
23
24
25
9965 100 68371
4322 009 00731
4322 004 25421
4322 004 25061
4322 004 25121
Motor housing
Service assy motor
Atlas hose assembly
Metal telescopic tube Conical 35 mm
Small nozzle Conical 35 mm
1800 W Kingclean
Deep Black 80231
26
28
29
4322 004 25111
4322 004 25101
4322 004 25201
Crevice nozzle Conical 35 mm
All oor nozzle # 34 Conical 35 mm
Accessory holder Easylive
Deep Black 80231
Deep Black 80231
Deep Black 80231

FC8654/01
4-8
4
5
1
3
6
A
A
2
EXPLODED VIEW

FC8654/01
5-8
C
D
C
B
B
B
B
8
12
13
14
15
7
9
10
11
16
EXPLODED VIEW

FC8654/01
6-8
E
E
F
F
F
F
19
22
20
17
18
21
EXPLODED VIEW

FC8654/01
7-8
23
28
25
26
24
29
EXPLODED VIEW

FC8654/01
8-8
Version history
Version 1.1 : FC8654/01 initial release.
Version 1.2 : Update pictures for removing the buttons in Disassembly- and Re-assembly advise.
Version 1.3 : In Parts List and Exploded view: Added Pos. 29, 4322 004 25201 Accessory holder Easylive Deep Black 80231.
Version 1.4 : On page 1 at Technical Information: Changed Input Power : 1900 W into Input Power (IEC) : 1800 W.