Philips FC8760/01 User manual

Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
ServiceManual
Philips Consumer Lifestyle
Vacuum cleaner
FC8760/01
12/09
PRODUCT INFORMATION
• This product meets the requirements regarding
interference suppression on radio and TV.
• After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
• Colour : Bright Juicy red
• Power consumption : 2000 W
• Suction Power : 340 W
• Noise level : 82 dBA
• Action radius : 11 mtr
• Cord length : 8 m
• Filtration : Power cylone
Hepa 12 Super Clean Air
• Dimensions appliance : 505 x 292 x 292 mm
• Dimensions F-box : 650 x 330 x 310 mm
• Weight : 5.5 kg
ACCESSORIES
• Nozzle : RD 264 Nozzle
• Tubes : Metal lacquered 2 pcs. telesc. tube
• Accessories : Crevice nozzle and Small nozzle
• Accessory storage : Accessory clip on tube
• Coupling : Button coupling
REPAIR INSTRUCTION
• No specific issues
OPTIONAL (accessories)
• No specific issues

FC8760/01
2-10
• To remove the Bucket, unlock the top handle by pushing
the button on the lid of Bucket (see picture).
• The button (3) on the lid is a spare part, it can be
replaced by removing screw A(see picture).
A
• The bucket can only be placed back with the lid mounted
and positioned in the correct way, otherwise the handle
cannot be closed.
• The Inlet lter assy (4) on the front (motor side) of the
Bucket can be removed by pulling the lip at the top (see
picture).
• The foam in the Inlet filter assy can be cleaned.
By pulling the plastic ring the foam filter can be removed
without touching the dirt on the filter (see picture).
• The bottom of the Bucket can be removed as shown in
the picture below.
Remark:
The Bucket can be placed back without the bottom, this
will not lead to a safety problem, but all the dust will get
into the bottom housing.
DISASSEMBLY- AND RE-ASSEMBLY ADVISE

FC8760/01
3-10
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
• To reach the inner parts for repair, Upper housing (18)
has to be removed. First the On/Off button (17) and
Cordwinder button (16) must be removed, this can be
done with a screwdriver.
Remark:
The two buttons are secured with 4 “snap locks”, be
careful when removing (see picture).
a
bc
d
a
• When lifting at position bpush the button a little
towards the front side.
b
c
d
• When assembling, the buttons can easily be mounted by
clicking, start at the side of the handle.
Remark:
Check that the two springs are in the correct position.

FC8760/01
4-10
• After removing the two buttons remove the 4 screws B
at the back and the 5 screws Cat the front of the upper
housing (see pictures).
• Screw Dat the front does not need to be removed, this
screw is for ESD and is located in the lower housing.
BB B
B
D
C
C
C
CC
• To replace the potmeter (9) situated at the bottom
of the upper housing, remove knob (7) on top of the
upperhousing and remove the 2 scews Eat the bottom
of the upper housing (see picture).
E
E
• After removing the upperhousing, Hose connection (10)
and Bucket inlet sealing (13) are accessible. To replace
the hose connection screw Fhas to be removed.
F
• To replace Cordwinder (24) or Motor (31) Motor
housing (28) has to be removed, this can be done by
removing the 4 screws G(see picture).
Remark:
A special long screw driver is needed!
H
H
G
GG
G
• To replace the PCB (9) remove the 2 short screws H.
DISASSEMBLY- AND RE-ASSEMBLY ADVISE

FC8760/01
5-10
MMotor
ACIN
ACIN
ESD
C1
0.33F
275V
C3
333
DW
½ W
5V1
D1
1N4007
D2
1N4007
R6
1M
R5
100R
SW
IC1
1
2
3
4
8
7
6
5
R8
HV R37
2M2
F
Fuse
R7
HV R37
2M2
R1
2W12k
R2
2W12k
R4
47k
R3
180k
TR
BTA16-600B
C2
470F
10V
RP
47k
ELECTRICAL DIAGRAM

FC8760/01
6-10
PARTS LIST
Pos Service code Description Remark
1*
2*
3
4
5
9965 100 51329
9965 100 51299
9965 100 51311
4322 005 33151
9965 100 51318
Bucket assy
Lid assy
Unlock button
Inlet lter assy
Exhaust grille assy
Smoke bl. transp. / Met. silver
Smoke bl. transp. / Met. silver
Deep black
Deep black
6
7
8
9
10
4322 004 93711
9965 100 51319
9965 100 51312
4322 006 24701
9965 100 51305
HEPA lter 12 Cougar
Turn knob
Decorative ring
PCBA Cougar
Hose connection
Deep black
Deep black
Deep black
11
12
13
14
15
9965 100 51306
9965 100 51324
9965 100 51308
9965 100 51323
9965 100 51322
Inlet sealing
Caster assy
Bucket inlet sealing
Cordwinder lever
Top handle assy
Deep black
Deep black / Met. silver
16
17
18
19
20
9965 100 51297
9965 100 51301
9965 100 51298
9965 100 51327
9965 100 51321
CW button
On/Off button
Upper housing
Protection ring (on switch)
Cord outlet assy
Deep black
Deep black
Bright juicy red
Deep black
21
22
23
24
25
9965 100 51325
9965 100 51326
9965 100 51302
4322 005 33171
9965 100 51303
Handle pushing tube
Handle pushing tube spring
Valve assy
Cordwinder Cougar
Lower housing
8 m / 4.8 plug
Deep black
26
27
28
29
30
9965 100 51313
9965 100 51316
9965 100 51309
9965 100 51304
9965 100 51317
Motor housing cover
Exhaust sealing
Motor housing
Silencer motor housing
Motor sealing ring
31
32
33
34
35
4322 006 99041
9965 100 51296
9965 100 51315
9965 100 51314
9965 100 51328
Domus 230 V / 50 Hz 1800 W IEC
Motor silencer
Silencer lower housing
Motor housing sealing
Motor buffer back
CCAW Wire
36
37
38
40
41
9965 100 58098
4322 004 24561
4322 004 24071
4322 003 42561
4322 004 24221
Rear wheel assy
Hose assy Cougar
Telescopic Tube Actuator bush
Accessory clip
Crevice nozzle
Whale grey
Dark raven
Dark raven
Dark raven
42
44
4322 004 24161
4322 004 24541
Small nozzle
Nozzle RD264 Active coupling
Dark raven
Dark raven
* Standardized colour
= changed

FC8760/01
7-10
A
4
3
2
1
5
6
EXPLODED VIEW

FC8760/01
8-10
C
F
C
E
E
C
G
G
D
C
C
BB
B
B
X
W
W
V
Z
V
Y
12
13
14
15
16
17
18
19
9
20
21
22
7
8
9
10
11
EXPLODED VIEW

FC8760/01
9-10
H
H
H
H
X
Y
Z
23
26
29
30
31
34
27
36
28
35
24
25
33
32
EXPLODED VIEW

FC8760/01
10-10
41
40
42
37
38
44
EXPLODED VIEW