Philips FC9088 User manual

ServiceManual
Philips Consumer Lifestyle
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Vacuum cleaner
FC9088
09/03
PRODUCT INFORMATION
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Colour : Pearl Beige/Vivid Green
- Power consumption : 1250 W (IEC) 230 V
- Maximum Air displacement : 39 l/s
- Vacuum : 28 kPa
- Duststorage capacity : 3 L
- Cord length : 8 m
- Fiter system : Classic S-Baglong
performance
: 3 layer permanent motor
protection filter
: Ultra clean air washable
HEPA13 exhaust filter
- Net weight : 7.5 kg
ACCESSORIES
- Nozzle : Tri-Active all purpose nozzle
- Additional Nozzle : Super Parquet nozzle
- Tubes : Metal lacquered telescopic tube
- Handgrip : Ergonomic handgrip
- Accessories : Brush, crevice nozzle and
small nozzle
- Accessory storage : Active accessory holder in tube
- Coupling : Button coupling
OPTIONAL (accessories)
- FC8021 : S-bag Classic
- FC8022 : S-bag Clinic
- FC8023 : S-bag Anti-Odour
- FC8038 : Ultra clean air washable HEPA13 exhaust filter

FC9088
- To open the appliance, first remove the exhaust filter cover
and filter.
- Remove the hinge lock-pin (see pictures).
- Remove the dustcover by simultaneously pushing the click
hook in the hinge and bending the hinge outside with a
screwdriver (see picture).
- To be able to remove the upper housing the cord outlet
must be removed using a screwdriver in the lower section
(see picture).
1
2
- After removing the 6 screws (A) the upper housing can be
removed.
- When the repair is finished, check whether all functions of
the appliance work properly.
- To disassemble the cord winder, use TORX screwdriver
no. T10, which is one of a set consisting of T20; T15; T10;
T9; T8; T7 and T6 (code number 4822 395 50145).
REPAIR INSTRUCTION
- The spare parts have been standardized as much as possible.
- Depending on the original cord, the spare cord must be
shortened to the length of the original cord.
- The cord winder spring must be tensioned to the maximum
level and then be rewound approx. 1.5 turn.
- Item 16, safety valve, opens to cool the motor if the air
displacement is too low or if the airflow is blocked.
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
2-7

FC9088
PARTS LIST
ELECTRICAL DIAGRAM
MOTOR
POWER
MODULE
Black
Black
M
White
CORD WINDER
Brown
3-7
Pos Service code Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
4222 459 45586
4222 459 45637
4222 459 45583
4222 459 45578
4222 459 45585
4222 459 45579
4322 004 93350
4222 459 45638
4222 459 45581
4322 001 74110
4222 459 45605
4222 459 45604
4222 459 45592
4822 480 10228
4322 003 33280
4322 005 16990
4222 459 45595
4222 459 45640
4222 459 45639
4222 459 45641
4222 459 45589
4322 006 23880
4222 459 45590
4222 459 45593
4222 459 45594
4222 459 45606
4322 001 73440
4322 009 09960
Hinge pin
Dustcover assy FC9088 Beige
Dustbag detector incl. spring
Dustbagholder Vapour dusk
Handle assy White
Exhaust grille Beige
HEPA filter
Cord outlet Vivid green
HEPA lock grille Beige
Exhaust seal
Support right Beige
Support left Beige
Control wheel ring Chrome
Inlet filter
Inlet grille
DBFI/valve assy
Brake lever
CW button Pastel green
On/Off button Pastel green
Control wheel Vivid green
Switch lever
PCB assy Pilatus HV
Pedal spring
Backpanel/Dustchamber
Silencer 3
Motor housing top
Bufferring front
Motor Domel 1271 220-240 V
Pos Service code Description
29
30
31
32
33
34
35
36
37
38
39*
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
4222 459 45607
4222 459 45608
4322 001 73450
4222 459 45609
4222 459 45598
4222 459 45599
4322 009 00080
4322 005 26610
4222 459 45596
4222 459 45603
4322 006 07390
4322 006 07400
4222 459 45602
4222 459 45601
4222 459 45600
4222 459 45597
4222 459 45642
4322 005 27980
4322 005 27930
4322 003 35550
4322 005 27970
4322 004 20860
4322 004 20330
4322 004 20110
4322 005 11040
8838 041 01010
Silencer 4
Motor bracket
Buffer back
Motor housing bottom
Front handle inside White
Front handle outside White
Cordwinder no cord!
Contact plate
Rubber knee bend dustchamber
Casterwheel kit Beige
Cordset Euro 4.8 mm 9 m
Cordset Swiss 9 m
S-Class sealing
Silencer 2
Silencer 1
Lower housing Beige
Bend type 5/hose/connection assy
Beige
Accessory holder Beige
2p telescopic tube act. bush Beige
Crevice nozzle Beige
Small nozzle Beige
Brush nozzle Beige
Tri-active nozzle Beige
Super parquet nozzle
Polishing disk
Polishing brushes
* Standardized colour

FC9088
EXPLODED VIEW
A
6x
4
2
3
15
6
8
7
12
11
9
10
4-7

FC9088
EXPLODED VIEW
B
8x
C
2x
Y
Z
Black
Black
White
Brown
15
17
14
13
16
24
19
20
23
22
21
18
25
5-7