Philips VRX362AT User manual

VCR PLUS+™ PROGRAMMING Simplifies VCR
programming by allowing you to merely enter
PlusCode®programming numbers found in
many published television listings
HI-FI STEREO SOUND WITH BUILT-IN
MTS/SAP DECODER Record stereo
videotapes from stereo sound sources
and playback pre-recorded hi-fi stereo
tapes in hi-fi stereo sound
FOUR-HEAD, DOUBLE AZIMUTH
DESIGN Combines direct drive
mechanisms with a precision digital
servo control to produce excellent
special effects
SMARTCLOCK™ Automatically
main-tains the correct time, resets the
clock after a power failure, and allows
manual time zone selection
FRONT PANEL AUDIO/VIDEO INPUTS
Added convenience for recording tapes
directly from a camcorder or connecting
accessory video equipment
FOUR-HEAD STEREO HI-FI VIDEOCASSETTE RECORDER WITH VCR PLUS+™ PROGRAMMING
VRX362AT
VRX362AT
VCR/Universal
TV/CBL/DSS
Remote
Recorder
Recorder
Videocassette
Videocassette

15X FORWARD/REVERSE LATCHING SEARCH Search
in forward or reverse mode at 15 times normal playing
speed in SLP. The Latching Search feature provides
continuous forward or reverse search with a single touch
of the control. A second touch stops the search operation
and returns the unit to the Play mode.
VCR/UNIVERSAL TV/CBL/DSS REMOTE Multifunction
infrared remote controls all operating features and functions of
this VCR, plus select functions of most Philips Magnavox and
some competitive brand television sets, as well as some cable
converter/decoders, and standard features of MAGNAVOX,
RCA, and SONY digital satellite receiver systems. Change
channels fast with the numeric direct access keypad and heads
up, on-screen display for confirmation.
• Power On
• Digital Auto Tracking
• Auto Play
• Auto Repeat
• Auto Rewind
• Auto Eject
• Auto Power Off
special effects
VRX362AT
UPC: 037849848517
Product Dimensions: 14.2"W x 3.6"H x 9.2"D
Product Weight: 6.2 lbs.
Carton Dimensions: 16.8"W x 6.3"H x 12.2"D
Carton Weight: 8.2 lbs.
Master Pack: 1
Contains: Four-Head Stereo Hi-Fi Videocassette Recorder,
VCR/Universal TV/CBL/DSS Remote Control w/Batteries, RF
Coaxial Cable, Operating Instructions, Warranty Information
Printed in U.S.A.
©1997 Philips Consumer Electronics Co.
A Division of Philips Electronics North America Corp.
Specifications subject to change without notice.
Visual Communications, Philips Consumer Electronics Co.
VCR Plus+ and PlusCode are trademarks of Gemstar Development Corporation.
The VCR Plus+ system is manufactured under license from Gemstar
Development Corporation.
RCA is a trademark of Thomson Consumer Electronics.
SONY is a trademark of Sony Electronics, Inc.
SmartClock is a trademark of Philips Consumer Electronics Company.
remote control:
additional
features:
INTERNET ADDRESS: http://www.philipsmagnavox.com
Four-Head Stereo Hi-Fi VCR with VCR Plus+TM Programming
AUTO HEAD CLEANER Gently, automatically
cleans the video head each time a tape is inserted or
removed to maintain optimum picture performance
during both recording and playback.
SMARTCLOCK™ Once activated, this menu-
driven feature will automatically maintain the
correct time, regularly checking and updating the
time if necessary. This function will also reset the
clock after a power failure.The menu-driven time
zone feature allows selection of appropriate time
for those who live in a time zone other that that
of their CATV service provider.
AUTOMATIC CHANNEL SETUP Activating this
feature allows the VCR tuner to scan through
television frequencies, automatically storing active
broadcast channels into memory.Then, only active
channels programmed into memory are tuned,
using the channel up/down buttons on either the
remote or front panel of the VCR. Automatic
channel preset can be repeated whenever desired,
should new channels become available. Channels
can be manually added or deleted.
FRONT PANEL AUDIO/VIDEO INPUTS Provide
added convenience to the user when recording tapes
directly from a camcorder to the VCR. In addition,
accessory video equipment such as a video game or
CD-i player can be connected for direct playthrough
to the TV set.
181-CHANNEL FS TUNING The digital quartz
tuner is capable of receiving up to 181 channels,
including UHF, VHF, and 113 cable channels, without
the inconvenience and expense of a cable company
decoder/converter (on non-scrambled cable systems).
Channel tuning is by random access with the remote
control transmitter or scan tuning up and down by
remote or at the set.
CLOCK/FUNCTION DISPLAY Continuously alerts
the user to all important recording and playback
conditions, correct time, counter position, tape speed,
channel number, etc. When the VCR is turned off, the
time display automatically dims, to make it less distracting.
BILINGUAL (ENGLISH/SPANISH) ON-SCREEN
FUNCTION DISPLAY Indicates record/playback
functions, channel number, clock setting, date,
counter, programming, one-touch record and record
standby, keeping the user alerted to the status of all
features in a heads up, on-screen display.
ON-SCREEN, REAL-TIME COUNTER WITH
TIME SEARCH Unlike the 0000 to 9999 tape
counters found in standard VCRs, this unit
incorporates a linear, real-time counter which
shows elapsed recording and/or playback time in
hours, minutes, and seconds. Now you can
advance or return to selected tape segments in any
time increment you desire.
TIMER/PROGRAMMER BACKUP SYSTEM Retains
timer programming information for up to one full
minute in the event of momentary power interruptions.
REPEAT PLAY When the VCR recognizes no
recorded signal or reaches the end of a tape with
the Repeat Play control activated, it will
automatically rewind to the beginning and enter
the play mode again. Repeat Play can be
discontinued by touching the button a second time
or by changing operation mode.
QUICK START MECHANISM Quickly and
effortlessly switches the tape mechanism from Stop to
Play in only one second, instead of the approximately
5 1/4 seconds of older models.
AUDIO/VIDEO INPUT/OUTPUT JACKS Connect
your VCR to the direct audio and video inputs of a
television receiver or monitor equipped with input
jacks, for better picture and sound quality during tape
playback. Jacks also allow a second VCR to be
connected for editing and/or duplicating personally
recorded, non-copyrighted videotapes.
HI-FI STEREO SOUND WITH BUILT-IN
MTS/SAP DECODER Record stereo
videotapes from stereo sound sources and
playback pre-recorded hi-fi stereo tapes in hi-fi
stereo sound–with an excellent 90dB+ dynamic
range–through a stereo-equipped TV or regular
TV and stereo hi-fi home audio system. The
built-in MTS/SAP decoder allows reception and
recording of off-air television stereo broadcasts
and second audio program transmissions, where
available. Backup memory logic retains the cable
channel guide map indefinitely even during a
power failure or when the VCR is disconnected
from its power source.
VCR PLUS+™ PROGRAMMING Simplifies
VCR programming by allowing you to simply
enter PlusCode®programming numbers found
in many published television listings. When
recording begins, your VCR automatically
selects the proper TV channel and program
length. Backup memory logic retains the cable
channel guide map indefinitely even during a
power failure or when the VCR is disconnected
from its power source.
ONE-TOUCH RECORD Record up to eight
hours or to the end of the tape with the touch of
a single button. Each touch of the OTR button
adds 30 minutes of additional recording time.
8-EVENT/1 YEAR SMART PROGRAMMING
Program your VCR for unattended recording of
up to eight separate programs over a full 365-
day period. No manual setting, adjusting, or pro-
gramming of the calendar function is required.
• REMOTE CONTROL ON-SCREEN MENU
PROGRAMMING
FOUR-HEAD, DOUBLE AZIMUTH DESIGN
Combines direct drive cylinder and capstan
motors with a precision digital servo control to
produce excellent special effects reproduction in
Still and Slow modes in both SP and SLP speeds.
DIGITAL AUTO TRACKING SYSTEM When
tape playback begins, this feature automatically
seeks the optimum tracking position in the
tracking range, and the optimum audio signal
tracking position for clearest picture and sound
from videotapes. Controls are provided on the
remote transmitter to give you manual control
should tracking adjustments be necessary.
programming &
record/playback
features:
picture:
convenience: