PHL Audio B30 User manual

B30
APPLICATIONS
These models have been designed for Bass-Midrange applications
in the field of Sound Reinforcement.
They can be used in two-way and three-way systems of 300W AES
when high sounding quality and high efficiency are needed.
Maximum recommended X-over freq. is 2.0kHz, Optimum Bass-Reflex
loading is situated between 40L and 50L tuned from 48Hz to 52Hz. FEATURES
Power handling capacity 300 W AES
Reference efficiency(1W @ 1m) 96 dB SPL
SPL max (continuous) 117 dB SPL
Usable frequency range 40-2000 Hz
Environmental withstanding Outdoor
DESIGN CONCEPT
DEFLECTION CONTROLLED DIAPHRAGM optimized for dynamic
damping. DEFLECTION CONTROLLED DIAPHRAGM technology consists
in optimizing the shape and material of the diaphragm so that it
works as a mechanical transmission line, to avoid breaking modes
as well as mechanical threshold which destroy sound quality.
This leading edge technology offers substantial sonic advantages.
Among them: sound coherency, fast transients, stable sound
imaging, high sensitivity, wide frequency range and reduced
directivity pattern.
VENTED COMPACT MAGNET SYSTEM. It has been carefully
optimized to obtain maximum transducing efficiency while
avoiding unlinear behavior such as coil inductance variation
with position, flux modulation, harmonic distortion, rest position
offset, air compression and off-axis voice-coil pushing.
Its design incorporates a T-shaped and vented pole piece, and
a flux stabilization ring. It also takes into consideration
demagnetization at cold temperatures.
INTERCOOLER SYSTEM (patented). Entirely integrated into the
loudspeaker itself, the INTERCOOLER SYSTEM extracts the heat
produced by Joule effect in the voice-coil by the means of an air
flow directed through the heatsink rims of the basket by the
motion of the dust-cap and the spider.
The gain brought about by this technology is over 20 % of extra
power, so for example, a 3”coil according to this design has
the same power handling capacity as a classical 4”one.
ARCHITECTURAL SPECIFICATIONS
NOMINAL DIAMETER : 300 mm.
FRAME : High tensile alloy pressure
die-cast basket with patented
INTERCOOLER SYSTEM.
MAGNET SYSTEM : 2.5”highly
energized, heat extracting design
with vented pole piece and flux
stabilizing ring.
VOICE COIL : High-temperature
stabilized copper wire wound
on high-strength glass polyimide
former.
CONE ASSEMBLY : High-strength
cellulose fiber cone and central
dome impregnated and front cated
with damped resins, fitted with
high-compliance treated double-roll
fabric surround.
SPEAKER MASS : 6.40 kg.
PROFESSIONAL SERIES
6 Ω
12” Bass Midrange Drivers
High Efficiency
High Sounding Quality
4500
4510 8 Ω

Ø 307 max.
Ø281.5 max.
Ø326.5 max
(on angles)
+ Red dot
13
124.5 max. 2 x screw button
terminals
8 x Ø6.5 Holes eq. spaced
on Ø300 and on Ø308
Ø173 max.
4500 4510
TYPICAL CHARACTERISTICS
Rated impedance Z 6 8 Ω
Reference efficiency (1 W@1 m) - 96 96 dB SPL
Usable frequency range 1- 40-2000 40–2000 Hz
Power handling capacity 2(AES) - 300 300 W
Max Sound Pressure Level 3SPLmax 117 117 dB SPL
Min. impedance modulus Zmin 4.8 @ 260Hz 6.2 @ 250Hz Ω
Voice-coil inductance 4@ 1 kHz Le1k 0.81 1.08 mH
@ 10 kHz Le10k 0.35 0.46 mH
Bl product Bl 14.2 15.1 N/A
Moving mass Mms 0.055 0.054 Kg
THIELE-SMALL PARAMETERS : TYPICAL (QC LIMITS)
Resonance frequency 5Fs42 (±5) 42 (±5) Hz
DC resistance 6Re4.2 (±0.4) 5.5 (±0.5) Ω
Mechanical quality factor Qms 3.2 3.2 1
Electrical quality factor Qes 0.30 0.34 1
Total quality factor Qts 0.28 0.31 1
Mechanical suspension compliance Cms 265 265 10-6 m/N
Effective piston area Sd0.0539 0.0539 m2
Equivalent Cas air load Vas 0.108 0.108 m3
Max. linear excursion Xmax ± 6.0 ± 6.0 mm
Linear displacement volume Vd0.323 0.323 10-3 m3
Half-space efficiency 2.5 2.3 %
Unity load volume Vas Qts281010
-3 m3
ABSOLUTE MAXIMUM RATINGS
Short term max. input voltage 7Vmax 80 100 V
Max. excursion before damage Xdam ±12 ±12 mm
Ambient operating temperature –10 to +50 °C
Storage temperature 8–20 to +70 °C
Environmental conditions 9Outdoor
APPLICATION INFORMATION
Air volume occupied by the driver 10 2.1 2.1 10-3 m3
Speaker net mass 6.4 6.4 Kg
Recommended reflex box Vb/Fb45 / 52 45 / 48 L / Hz
Electrical polarity A positive voltage applied on the red
terminal produces forward cone motion.
PHYSICAL CHARACTERISTICS
PHL Audio S.A. provides these specifications as representative of current production after conditioning. Because of our continuous research, they are subject to change without notice.
SPECIFICATION NOTES
Note 1 : Allowing for energy response, excursion
capability, Power spectrum, and -3dB low
freq. roll-off for standard reflex tuning.
Note 2 : Established at 20°C ambient temp, according to
AES2-1984 standard using IEC268-1 simulated
programme signal and a 50 liter Bass-Reflex test
enclosure tuned at 53Hz.
Note 3 : Established at 1m on axis of the loudspeaker mounted
in test enclosure, when driven at full AES Power
Handling Capacity, including 4dB of thermal
compression loss.
Note 4 : Measured at 20 mA in free air.
Note 5 : Measured at 20 mA and 20°C ambient temp.
in free air conditions, after full run and rest.
Note 6 : Measured at 20°C ambient temp.
QC limits are ±10%
Note 7 : Stated in RMS voltage according to IEC 268-5.
Note 8 : Includes shipping conditions. The lower limit prevents
from demagnetization.
Note 9: Our products are classified in three categories :
Indoor, Outdoor, and Outdoor ✚ for permanent
outdoor use or severe conditions.
Note 10 : Calculated for front mounting on to a 18 mm thick
board.
461, rue des chênes ■Z.A
77590 CHARTRETTES
FRANCE
Tél : [phone]
Fax : [phone]
e-mail : [email protected]
http: //www.phlaudio.com
4500 ■4510
12” Bass Midrange Drivers