PHOTON GL-500i User manual

PORTABLE POWER STATION
USER MANUAL
ENGLISH
GL-500i│GL-1000i

TAKE LITHIUM
TO POWER THE WORLD
PORTABLE
POWER STATION

TABLE O F
CONTENTS
GENERAL SAFETY RULES 04
SPECIFICATIONS 05
INPUTS AND OUTLETS 07
BUTTON FEATURES 09
LCD DISPLAY 10
OPERATING INSTRUCTION 11
WHAT IT POWERS 12
HOW TO CHARGE 12
TROUBLE SHOOTING 14
NOTICE 16
ACCESSORY LIST 17
CLEANNING 15
TRANSPORTATION AND STORAGE 15

1. GENERAL SAFETY RULES
4
WARNING
1. Read this manual before using this product. Failure to follow the instructions and safety precautions
in this manual can result in damage to the product or personal property, or serious injury or death. DO
NOT use the product with incompatible components or alter the product in any way.
2. Improper use may result in fire, property damage, or personal injury. Make sure to use the product
according to the following safety rules and guidelines.
3. Do not expose the product to any liquid or submerge in water. If the battery comes into contact
with water, it may cause chemical decomposition of the battery. This may cause the battery to catch
fire or explode.
•DO NOT disassemble, repair or modify the unit or the battery by yourself.
•DO NOT place the unit close to or in a fire or expose it to heat. Keep out of direct sunlight.
•DO NOT charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
•Only use the output socket to power external devices. Never connect the output to mains power
under any circumstances.
•DO NOT touch the unit or the plug- in points if your hands are wet.
•DO NOT connect any metallic objects to the AC input or output. DO NOT rub your eyes if fluid
from inside the unit should get in your eyes.
•DO NOT dispose the unit together with household waste.
•DO NOT use any inappropriate power cords.
•Use and store the unit only in a clean and dry environment. Do not use and store in dusty and wet
environment.
•Check the unit prior to every use. Do not use the unit if it is damaged, broken.
•DO NOT use the unit if the power cord is damaged or broken.
•Keep the unit away from children. DO NOT let children use the power supply unit.
•Keep this product away from pets.
•DO NOT use or store the unit in an area or environment with high temperature.
•Should fluid from inside of the unit come in contact with your skin or clothing, wash the affected areas with
tap water.
•In a storm, unplug the power cord from the socket.
•DO NOT place the unit on its side or upside down while in use or storage.
•If rust peculiar odors. overheating or other abnormal circumstances are observed, stop using the unit
immediately and contact the dealer or our customer service center.
•The unit complies with all legal requirements for transport of dangerous goods.
•Only charge, use and store the unit within an ambient temperature of 0 to 40°C (32 ~104°"F).
•Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibrations.
•Once the unit is fully charged, unplug the adapter or charger. Herholdts is not liable for any damage caused by
using different brand charging cables.
•Use of different cables will void the products warranty and may cause damage or serious bodily injury.

5
2. PRODUCT SPECIFICATION
MODEL
NAME
GL
-500i
Battery Cell Chemistry:
Lithium Ion (NMC
）
Capacity:
519.48Wh (22.2V 23.4Ah)
Continuous
Power Output:
500W
Surge Peak:
1000W
AC Output Voltage:
230V
Frequency:
50Hz
Waves Type:
Pure
-Sine Wave
Wireless Charge
10W
Life Cycle:
>500 Cycles @100% DoD
Charge Time:
With Adapter charger: 0
-100%
charge 6
-7 hours;
With car charger:0
-100%
charge 7
-8 hours;
With solar charger(100W): 0
-100%
charge 7
-9 hours
Charging Temperature Range:
32
°–104°F (0°–40°C)
Operational Temperature Range:
14
°–113°F (-10°–40°C)
Warranty:
1
Years

6
2. PRODUCT SPECIFICATION
MODEL
NAME
GL
-1000i
Battery Cell Chemistry:
Lithium Ion (NMC
）
Capacity:
999Wh (22.2V 45Ah)
Continuous
Power Output:
1000W
Surge Peak:
2000W
AC Output Voltage:
230V
Frequency:
50Hz
Waves Type:
Pure
-Sine Wave
Wireless Charge
10W
Life Cycle:
>500 Cycles @100% DoD
Charge Time:
With Adapter charger: 0
-100%
charge 7
-9 hours;
With car charger:0
-100%
charge 9
-10 hours;
With solar charger(150W): 0
-100%
charge 8
-12 hours
Charging Temperature Range:
32
°–104°F (0°–40°C)
Operational Temperature Range:
14
°–113°F (-10°–40°C)
Warranty:
1
Years

7
3. INPUTS AND OUTLETS
1
2
3
4
5
6
7
8
9
10
11
LCD Screen Display
DC 5525 Output
Cigarette Lighter Output
USB-A Output
USB-C Output
AC Output
Anti-collision Strip
DC Input
PV Input
SOS MODE & LED light
Wireless Charger
1
2
34
5
6
7
8
9
10
11

LCD DISPLAY
USB-A Output Ports
USB-C Output Ports
DC Input
PV Input
Displays the various conditions of the product. The
screen will turn off after 5 mins. You can turn it on by
pressing ON/OFF button.
Charge a wide array of devices such as your iPhone, tablet,
speakers, or anything that needs to be charged through a USB-A
Port. The USB-A Output Indicator Light will automatically light up
when a USB-A port is in use.
Devices that charge through a USB-C port, such as a
MacBook Pro, Android phone, or other devices can be
charged by the USB-C port.
Charging the unit by the DC input ,there are three ways
for charging : solar PV input / car charger input and the
adapter input .
it is an Anderson port. The unit can be charged by the
solar PV panel with Anderson plug.
3. INPUTS AND OUTLETS
8

4. BUTTON FEATURES
Activates:
Single Press - Turn on/off LED light on back of unit
Double Tap - Activate SOS Mode, LED light visual distress signal.
Please Press Button C to activate the DC output in the area after turning
on the Main Power (A).
Please Press Button D to activate the USB output after turning on the
Main Power (A). The USB-C cable of different devices need different
endorsements of corresponding protocols, if the USB-C port doesn't
work, try to use the AC adapter to charge .
Press Button E to Activate the AC output after turning on the Main
Power (A). Please turn off the button when not in use.
Note: The Fan may turn on intermittently during heavy output loads or
high temperatures. Wattage Limit Please observe the wattage limit on
the AC OUT.
GL-500i: Press Main Power (A) to turn on or off the wireless charger.
GL-1000i: Press Button D to Activate the Wireless charger after turning
on the Main Power (A).
Product utilizes an internal cooling fan to ensure the product is operating
within the appropriate temperature range. when it experiences a higher
output load, will automatically turn on the fan during discharge or
recharging , the fan may operate intermittently to keep internal
temperature within operating range.
BUTTON A: MAIN POWER
BUTTON B: LED LIGHT ON/OFF
BUTTON C: DC OUT ON/OFF
BUTTON D: USB OUT ON/OFF
BUTTON E: AC OUT ON/OFF
WIRELESS CHARGER
COOLING FAN
Button A is the main power switch. Press Button A to turn on or off
9
A: MAIN POWER
B: LED LIGHT ON/OFF
C: DC ON/OFF Button
D: USB ON/OFF Button
E: AC ON/OFF Button
A B D E
C

5. LCD DISPLAY
BATTERY SOC INDICATOR H : The battery SOC is provided by percentage of battery charge
corresponding to the number of bars and percentage displayed. The segments in the
battery SOC correspond to the current state of charge, 1-20% one segment, 21-40% two
segments, 41-60% three segments, 61-80% four segments, and all five are lit when charge
level is 81-100%.
Provides the user live telemetry data on time to completely charge, or deplete the battery
based upon the energy entering or leaving the battery.
Highly recommend to fully charge the product when first use. Higher battery SOC
indicator show, more precise the data will indicate.
PLEASE BE AWARE that this value can adjust multiple times as the energy draw changes
from the connected devices. This is evident during initial activation of ports with a
connected device.
RECOMMENDED back to charge the product when battery indicates less than 20%.Note
that when you first plug in a power source, whether it's a solar panel or a wall charger, the
product may take a minute to detect and adjust its charge circuitry before it starts drawing
power from the source.
•Input status : The product is capable of providing input energy in watts.
•DC output status : The display will provide output watts of the DC port.
•AC output status : The display will provide output watts of the AC port.
•USB output status : The display will provide output watts of the USB port.
H: Battery SOC Indicator
I: Input Status
J: DC Outputs Status
K: AC Outputs Status
L: USB Outputs Status
10

6. OPERATING INSTRUCTION
Only operate the Power Station within the recommended temperature range
14°–113°F (-10°–40°C). Do not move the unit if it is charging or in use.
How to power AC devices
Make sure the devices you are plugging in are turned off. Connect the power cable plug
of the electrical device into an AC outlet on the Power Station. Push the AC ON/OFF
button to turn on AC power. The button will illuminate when it is turned on. Turn ON
the AC device. The LED Display will show the real-time wattage use of the device. When
finished, turn off all attached devices, remove the power cable, then push the AC
ON/OFF button to turn OFF AC power. (If you leave the AC ON/OFF button ON it will
deplete the energy of battery.)
NOTICE:
If the total output exceeds running power, the power station will automatically shut off.
Make sure the Power Station can supply enough continuous (running) and peak
(starting) watts for the items you will power at the same time.
How to power DC or USB devices
Connect the power cable plug of the electrical device to a USB outlet or DC outlet. Push
the DC ON/OFF or USB ON/OFF button to turn on. The button will illuminate when it is
on. The LCD Display will display real-time wattage of the device. When finished, push
the DC ON/OFF or USB ON/OFF button to turn off
NOTICE:
If the total output exceeds the wattage output of the DC outlet, the power station will
automatically shut off. Ensure the power consumption is less than what the ports are
rated before connecting them to the Power Station.
11

7. WHAT IT POWER
8. HOW TO CHARGE
Only charge the Power Station within the safe charging temperature range (32°–104°F
(0°–40°C). It is recommended to fully charge product every 3 months to maintain the
health of the battery pack.
Caution: Only one kind of charge modes is allowed when charging.
Do not charge the product with solar charger and adapter or car charger at the
same time!
12
230V

1. AC Adapter Charging
2. Solar Charging
•DO NOT charge the unit via solar panel that operate voltage is outside of DC12-26V
•Place Solar Panels in direct sunlight as much as possible.
•Support 60W/80W/100W/120W Max Solar Panels (Not included), the charging time is
determined by the solar light intensity.
3. 12V Car Charger Charging
Caution: Once it is fully charged, unplug the adapter or charger.
13

9. TROUBLE SHOOTING
The device does not discharge:
(1) Check whether the output buttons are activated ;
(2) Check whether the total output power exceeds the rated output power;
(3) Check whether the temperature of the equipment is too high.
The device can not be charged:
(1) Confirm that the wall plug power adapter's cord is inserted fully into the DC Input.
(2) Confirm that the AC wall plug power adapter is the charger provided with the product.
If the input does not comply with the requirements located in the general
specifications section, the low watt range 0 % to 10 %may be displayed on the LCD
(3) If the device cannot be charged immediately after it is discharged, please wait for an
hour and try again, it may enter the over-temperature protection.
In the event that the unit catches fire:
Never attempt to extinguish a fire if it is unsafe to do so. Contact your local fire
department. If it is safe to do so use an electronic safe fire extinguisher or fire blanket. Do
not touch any hot or burnt components. Dispose of the unit only when safe to do so after
the unit is extinguished and fully cooled.
Getting the Battery Pack Wet.
Warning: Getting your battery pack wet could cause electric shock or other bodily harm.
Never attempt to power on a wet battery pack.
(1) Surface Water: IF your battery pack was lightly splashed with water, wipe the unit dry
and allow it to fully dry For several hours before powering on.
(2)Water got inside: IF water entered the battery pack, do not touch the battery pack and
place it in a safe area until Fully dry. Do not attempt to power the battery pack on and
dispose of the battery pack in accordance with local laws.
(3)Battery fell into water: Do not attempt to retrieve the battery back and contact your
local fire department for guidance. If unit is retrieved from the water, do not touch the
battery pack and place it in a safe area until fully dry and dispose of it properly in
accordance with proper battery disposal.
14

10. CLEANNING
Be sure that the product is disconnected from all input power sources and output
devices. Use a clean, dry, soft-lint-free cloth to wipe down it. Remove any debris, dirt,
or other blockages on both side vents. When cleaning debris from the side vents, do
not allow the debris, dirt, or other blockages to enter the body of the product.
DO NOT use abrasive cleaners or solvents.
DO NOT use compressed air to clean side cooling vents, as this will force
foreign particles into the internal circuitry.
To avoid the risk of electrical shock, DO NOT use metal objects to clean ports.
11. TRANSPORTATION & STORAGE
• Battery life may be reduced if not used for an extended period of time. Discharge
the Power Station to 30% battery life, then charge to 85% every 3 month to prolong
battery life.
• Store indoors, in cool temperatures, mild humidity, and away from direct sunlight
• DO NOT place the product near a heat source, such as a car in direct sunlight, a fire
source, or a heating stove.
• Leaving in a vehicle or other confined spaces in extreme hot temperatures can lead
to decreased service life, overheating, and fire. Extreme cold conditions below specific
storage range can also harm the product performance and service life.
• Store the product in a dry environment. DO NOT place the product where it may
contact water or high humidity. Keep away from corrosion chemicals and gases.
• Make sure no small metal objects can fall on or around the product while in storage.
• Never transport a product with a battery power level higher than 30%.
• Never store the product in environments below -4°F (-20°C) or above 113°F (45°C).
• After taking out of storage, visually inspect to make sure the product and all
accessories look satisfactory. This increase review the intake and exhaust side vents to
ensure they are clear of debris. Allow the product to return to ambient conditions
before recharging or charging other devices.
15

12. NOTICE
AVOID EXTREME TEMPERATURE
NOT PERMITTED ON AIRCRAFTS
AVOID DROPPING
TO PRESERVE THE BATTERY LIFESPANS,
PLEASE USE AND RECHARGE AT LEAST
ONCE EVERY 3 MONTHS
USE ORIGINAL OR CERIFIED
CHARGER AND CABLES
DO NOT DISASSEMBLE
IT'S NOT WATERPROOF,DO NOT
EXPOSE TO LIQUIDS
PLEASE DISPOSE OF BATTERIES AND
ELECTRONIC GOODS IN ACCORDANCE
WITH LOCAL REGULATIONS
16

Recharge as needed. There are no pre-designated intervals at which to recharge as long
as the product is being used regularly. Avoid discharging completed on a regular basis, as
this can impact overall life.
Regularly inspect all ports and wall charger for any debris, dirt, damage and corrosion.
DO NOT attempt to fix.
DO NOT cover the product with towels, clothing or other items.
Regularly observe if the side vents are collecting dirt or dust, and clean following cleaning
procedures noted in manual.
MAINTENANCE
RECYCLING
Dispose of the unit in hazardous material-specific recycling locations only after a
complete discharge (if possible). Batteries are hazardous chemicals. Strictly follow your
local regulations regarding battery disposal and recycling. Dispose of the unit immediately
if it cannot be powered on after over-discharging.
Always return your used electronic products, batteries, and packaging materials to
dedicated collection points to prevent uncontrolled waste disposal and promote the
recycling of materials.
17
13. ACCESSORY LIST
AC 230V wall plug
Power adapter

TECHNICAL SUPPORT
If you have technical questions about the battery,
please feel free to contact us:
Mail: [email protected]
Herholdt’s Group (Pty) Ltd.