PianoDisc QuietTime GT-2 S User manual

QuietTime
®
GT-2 S
Addendum to Users Guide
New Sounds and Features
a product of
4111-A North Freeway Boulevard
Sacramento, CA 95834, USA
©2012 Burgett Inc. No part of this manual may be reproduced in whole or in part without the express written permission of PianoDisc, a devision of
Burgett, Inc.. QuietTime, PianoDisc and Burgett, Inc. all reserve the right to change product design and specifications at any time without prior
notice.

1
Selecting Sounds
The new GT-2 S system offers a total of 128 different instrument sounds. Piano and Church Organ
available via the two buttons at the front and 126 further sounds. Following please find instructions how
to access the other sounds:
•Choose an instrument sound from the list on the following page. Note the number next to the name of
the instrument.
• Press and hold the [Select]-button
• Enter the number of the instrument you selected by playing the keys for the required numbers on the
piano keyboard (see picture below). E.g. if you would like to enter the number 51 for Syn.Str.2, you
need to play the following keys:
a) A#1 (for the number 5)
b) C#1 (for the number 1)
• The number you selected is now shown in the display.
• Release the [Select]-button.
• The instrument sound has now been selected.
• Play the piano as usual and enjoy the new sound.
• To select another instrument sound, simply repeat the steps listed above.




2
QuietTime GT-2 S – List of sounds available

3
Sound effects
How to adjust Transpose, Reverb and Chorus
• Press and hold the [Select]-button
• Play the key shown below in order to adjust the related sound effect
Legend:
Middle "C" = Middle C (for orientation only)
Semitone = Transpose, one semitone up or down
Octave = Transpose, one octave up or down
Reset = Reset transpose to 0 (normal operation)
Reverb = Increase or decrease reverb by 5
Chorus = Increase or decrease chorus by 5
How to choose the reverb effect used
• Press and hold the [Select]-button
• Play the key C#6, in order to cycle between the eight reverb effects available.



Semitone
Octave
Reset
Reverb
Chorus
middle

4
How to choose the chorus effect used
• Press and hold the [Select]-button
• Play the key D#6, in order to cycle between the eight chorus effects available.
How to set the tuning
• Press and hold the [Select]-button
• Play the key F#8, to cycle between the eight available tunings.
The following tunings are available: 438 – 445Hz




F#8

5
The specifications listed above are subject to change without prior notice.
PianoDisc contact: PianoDisc – China
Phone: [phone]
Fax: [phone]
[e-mail]
PianoDisc Europe GmbH
16 Schoenweissstr, 90461 Nuremberg / Germany
Phone: +49 (0) 911 / 44 30 35
www.pianodisc.de
[e-mail]
Monday – Friday: 9 a.m. – 5 p.m. (MEZ)
PianoDisc – Seoul
South Korea
Phone: [phone]
Fax: [phone]
www.pianodisc.co.kr
PianoDisc – US
4111 North Freeway Blvd., Sacramento CA 95834
Phone: [phone]
www.pianodisc.com
[e-mail]
Monday – Friday: 8 a.m. – 5 p.m. (Pacific Time)