Pidion BIP-1300 Series User manual

•Please read the following warnings before using the product.
•Shapes and colors of the images shown in this manual may differ from the actual products.
•Contents of the manual may differ based on the software version of products or conditions of the wireless provider.

※ Please read “Cautions and Instructions” before using the product.
PIDION is a Leading Brand in the mobile industry. Bluebird Soft Inc. is a trusted global company which
represents high technology and is currently registered worldwide with its PIDION trademark legally
protected by law.
This manual is protected by Copyright Laws and has been produced by Bluebird Soft Inc.
(Please note that there may be editorial mistakes or possible omission of information.)
Programs embedded in the products are legally protected. Unauthorized copying, transferring, or deletion is strictly
prohibited by law.
There may be a few operational problems caused by the application environment, application program, or other
surrounding machinery. This product generates, uses and can radiate radio frequency energy and if not installed and used
in accordance with the instructions, it may cause harmful interference to radio communications. Service related to human
security is not provided as there may be a possibility of confusion in the electric waves of the product.
Registered Trademark
User Manual
This wireless product might cause radio jamming or there may be a possibility of confusion in the
electric waves of the product. Service related to human security cannot be provided
under these circumstances so it is up to the user to take precautions.
Registered Form
This machinery has been registered for electromagnetic emission sufficiency so the attention of
both the sellers and users are required. If an inappropriate product is sold or bought,
exchange it with a product for domestic use.
A-Class Machinery
(Information Communication
Device for Business)
Users ManualModel

This PDA device has passed the standard for the emission of electromagnetic waves. However, for the users health and safety please only use the authentic products
provided by Bluebird Soft Inc. Otherwise your safety cannot be guaranteed.
1. Precautions for Storing and Charging the Battery
• If the product or battery has been submerged under water, do not attempt to dry it by heater or microwave.
(In case of water damage, if the label inside the PDA changes color, you will not be able to receive free customer service for repair, so please be careful.)
• Ensure that necklaces, coins, etc. does not contact the battery’s connection terminal (the metal plate part).
• If you do not use the battery for a certain period of time, you must charge it first, and then store it in room temperature. This will ensure that the battery’s capacity and
durability are unaffected.
• Even when the battery is fully charged, usage time for a charge may shorten due to lowered voltage generated from the usage of the product.
• Use only original or authentic batteries and adaptors, and do not use them for applications other than those of the PDA.
(If you do otherwise there is a risk of explosion, or possibilities for shorter durability of the PDA, battery, and adaptor.)
•Plug in the adaptor firmly so it does not jiggle. If symptoms such as smoke, odor, or noise occurs, immediately turn the product off and detach the adaptor from the
outlet. Also in cases of thunder or lightening, please detach the adaptor from the outlet as well.
2. Precautions for the Phone and Product
• Make sure you are aware of all information related to the products electromagnetic waves.
- This product transmits and receives high-frequency energy (RF energy) while it is on. The Department of Information and Communication has legislated and is
enforcing the safety standards of these effects on the human body. This product meets all the standards.
(If you do not use the authentic product, we cannot guarantee the user’s safety related to electromagnetic transmission.)
•Please turn off the product in places where the use of it is prohibited (e.g.- airplanes, hospitals, etc.) or when you are in dangerous areas which may be associated to
electric waves.
• Do not put items using magnets such as credit cards, bankbooks, or transportation cards near the PDA. The magnetic waves from the PDA may damage the data saved in
the PDA.
• Record or store data from the PDA by making a backup copy. There may be cases where important data is deleted when repairing damage or upgrading the PDA, so
please backup your important data in advance.
• If the PDA has a RF Card reader we recommend that you do not use CDMA/GSM communications at the same time.
- If you use RF Card Reader and CDMA/GSM communication at the same time, calls may be cut off, incoming calls may not be received, or data connections might
became slow or completely cease. If you do not use it together, no problems with the connections will occur.
3. Other Precautions
• Data might be damaged by carelessness of the user or during reparation of the product. The producers are not responsible for the loss caused by it, so please record or
store your important data in advance.
• Do not remodel, disassemble or try to fix the product by yourself. Please contact customers service for reparations or inquiries.
• If you experience an allergic reaction from the product, stop using the PDA immediately and consult your doctor.
• Do not put dye or paint on the PDA. It may cause damage to the appearance or screen, or may cause the product to malfunction.
• Using the product in an environment with high temperature or humidity for a long period of time may cause damage to the product.
• If you use a drill, nail, or pen instead of the product’s Stylus Pen, it may cause damage to the LCD screen.
• Avoid external vibrations or shocks. When not in use and after detaching the power code, store it in a safe place where it cannot be dropped.
Cautions and InstructionsCautions and Instructions In order to use the product properly and safely, and to prevent accidents in
advance please follow the safety guidelines indicated below.
!!

Table of ContentsTable of Contents
Ⅰ. Knowing the Product
1. Components • 1
2. Basic Terms • 2
3. Button Description • 5
4. Function Key Description • 6
5. Attaching Detaching the Battery • 7
6. Charging the Battery • 8
7. About Batteries • 10
8. Connection Status Alerts • 11
9. PDA Specification • 12
Ⅱ. Learning the Basics
1. Turning On Off • 14
2. Using the Stylus Pen• 14
3. Starting the PDA • 15
4. Making Receiving Calls • 17
5. Typing • 18
6. Using SD Memory Card • 20
7. Software Reset (Initialization) • 21
8. Hardware Reset (Memory Format) • 21
9. Using SIM Card • 22
Ⅲ. Functions
1. Using Barcode Reader • 23
2. Using Camera • 25
3. Using Infrared Port (IrDA) • 27
4. Using Bluetooth • 28
5. Using Wireless Admin • 30
6. Using USB Host • 31
7. Setting GSM Band • 32
8. Setting CDMA 1xEVDO Data Connection • 33
Ⅳ. Connecting ActiveSync
1. Installing ActiveSync• 34
2. Downloading Files • 36
Ⅴ. Appendix
1. Q&A • 37
2. Customer Service • 38
3. Certifications of the Product • 39

Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 1 >
BIP-1300
1. Components
Thank you for purchasing a PIDION product.
Please check and make sure the following components are included in the package.
[Cradle][PDA] [Battery] [Stylus Pen]
[Power Cable] [AC Adaptor] [USB Cable] [Stylus Pen Elastic Cord]
I. Knowing the ProductI. Knowing the Product
The pictures or the figures in this manual may differ from the actual product.
If you would like to purchase an additional or optional version, please contact Customers Service.
!!

2. Basic Terms
[Front]
Printer
Printer Output
Magnetic
Card Reader
CDMA/GSM
Status Alert Lamp
Charge Alert
Lamp
LCD
Key Pad
Junction for Data Sync or
Portable Charge
Cradle Connection
[Bottom]
Please familiarize yourself with the basic terms of the PDA product.
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 2 >
BIP-1300
I. Knowing the ProductI. Knowing the Product

2. Basic Terms
[Right Side]
Speaker
Open/Close
Printer Button
Ear Jack
IC Card Reader
Barcode or
Camera Button
Reset Button
SD Slot
IrDA
[Left Side]
Printing Paper
Status
Window
USB Host
Terminal
Barcode or
Camera Button
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 3 >
BIP-1300
I. Knowing the ProductI. Knowing the Product

2. Basic Terms
[Back]
Barcode Scanner
Camera
Hand Strap
Open/Close
Battery Case
Button
[Back]
Flash
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 4 >
BIP-1300
I. Knowing the ProductI. Knowing the Product

3. Button Description
The side button on the PDA is generally used as the Barcode Reader.
You can also map it at the Users Setting to launch the Camera button.
Barcode/Camera
Side
Buttons
Move to the next line or enter signs and characters, run programs, or
activate folders.
Enter
Execute an event while holding the function key and a numeric key
simultaneously.
Function
Move to the left menu.
Move to the right menu.
Arrows
Turn the PDA ON/OFF.
You can turn the LCD back light ON/OFF by pressing the button for more
than 3 seconds.
Power
End the current call.
Or terminate the program currently in use.
End
Change the character mode to <Digits → Lower Case Letters → Capital
Letters>
Alpha
Deletes single characters at a time, from right to left.Clear
Launch Phone Program or make a phone call.Send
Front
Buttons
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 5 >
BIP-1300
I. Knowing the ProductI. Knowing the Product

4. Function Key Description
Move down+
Move up+
Launch Stylus Pen control program+
Commend Page Up+
Select the next launched program on Tasks, or move 8 spaces to the
right in Word Mobile (same feature as the Tab key on the PC)
+
Commend Page Down+
Gradually darken the LCD screen+
Commend Refresh (same feature as the F5 button on the PC)+
Gradually brighten the LCD screen+
Launch On-Screen Keyboard+
Launch Start (same feature as the Windows button on the PC)+
Combinations
of Function
Keys and
Digit/Symbol
Buttons
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 6 >
BIP-1300
I. Knowing the ProductI. Knowing the Product

5. Attaching/Detaching the Battery
[Attaching the Battery]
▪ After placing the battery into location and
pressing the bottom part of the battery, the battery
detachment button will pop up and will lock into
position.
▪ After locking the battery into position, attach the
battery cover by pushing it upwards.
[Detaching the Battery]
▪ When detaching the battery cover, press the
detach button.
▪ After detaching from the battery case, separate
the battery from the case by pulling it up, using the
groove at the bottom lefthand corner.
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 7 >
BIP-1300
I. Knowing the ProductI. Knowing the Product
※ Detach the battery only after you turn off the product.
※ Abruptly turning off the product may cause damage, and you may lose saved data.
!!

Connect the 24pin
to the DC Jack Gender
6. Charging the Battery
▪ In order to charge your PDA directly with the adaptor,
you have to connect the 24pin to the DC jack gender with
the adaptor.
※ The 24pin to DC jack gender is an opptional item.
▪ As shown in the picture, identify the top and the bottom
of the connector connected with the adaptor, and insert it
into the junction for power connection of the PDA while
pushing the buttons on both sides of the connector.
▪ After charging it completely, separate the PDA and
adaptor by pressing the buttons on both sides of the
connector.
※ Use the specified adaptor for the PDA.
[Charging with the Adaptor]
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 9 >
BIP-1300
I. Knowing the ProductI. Knowing the Product
※ The 9V 3A adaptor must only be used with the Bluebird products.
If you use it with others PDAs with less voltage, it might cause damage or explosion,
and can lower its durability.
!!

6. Charging the Battery
[Charging with the Cradle]
▪ As shown in the picture, connect the adapter to the
right side of the cradle where the power is.
▪ Once you place the PDA in the cradle, push it until you
hear a “click”.
▪ When charging the extra battery, place it in the cradle
where the extra battery charging space is and press it
until you hear a “click”.
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 8 >
BIP-1300
I. Knowing the ProductI. Knowing the Product
※ The battery is not charged when you first purchase a product. Please charge it for more than 48 hours before
using it.
※If the PDA has not been used for a long period of time you must charge the battery for 48 hours or more.
※ When the PDA and extra battery are attached together to the cradle, the PDA will charge before the extra battery.
!!

7. About Batteries
Charge Alert
Lamp on PDA
Charge Alert
Lamp on
Cradle
▪ When the PDA and extra battery are attached together in the cradle, the extra battery charges after the
PDA is completely charged. Therefore, it may need extra time in order to charge the extra battery when the
PDA and extra battery are placed together in the cradle.
▪ Status of Lamps during Charging
GreenGreenOrangeGreenPDA and Battery attached to
the Cradle (Charging Battery)
GreenGreenOrangeOrangePDA and Battery attached to
the Cradle (Charging the PDA)
GreenOrangeBattery attached to the Cradle
GreenOrangePDA attached to the Cradle
GreenOrangePDA Phone
CradlePDACradlePDA
CompletedChargingCharge Alert Lamp
Cases
※ When the Charge Alert Lamp on the cradle blinks orange, you
must detach the battery and place it again. This will occur when the
battery is not properly attached to the cradle.
※ Since batteries are consumable goods, the maximum time you can use the
PDA will gradually decrease over time. If the usage time drops in half we
recommend that you purchase a new battery.
(Batteries are under warranty for 6 months from time of purchase.)
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 10 >
BIP-1300
I. Knowing the ProductI. Knowing the Product
※ The maximum duration of the battery can be changed according to the service of wireless providers,
temperature of surroundings when in use, and the total period of battery use. Batteries will also be drained
when using functions like the magnetic card reader, printer, IC card reader, Internet etc. and when used in
areas without wireless service for an extended period of time.
!!

8. Connection Status Alerts
GSM/
CDMA
Connection
Status
Alert
Lamp
The PDA phone function is ON. However, GSM
connection is not supported in this area
Green Lamp, On
Indicates trouble with GSM connectionGreen Lamp, Blinking very Fast
(0.2 second intervals)
GSM connection is on - In between a phone
conversation or data communication
Green Lamp, Blinking Faster
(0.6 second intervals)
GSM connection is on - Able to have phone
calls in this area
Green Lamp, Blinking Slowly
(2 second intervals)
GSM connection is turned offGreen Lamp, Out
GSM connection is turned on
On the phone in conversation or data
communication
Green Lamp, On
Sending/Receiving of SMS
Green Lamp, Blinking Faster
Modem is on and can have phone calls
Green Lamp, Blinking
Modem is off or the area is unable to have
phone calls
Green Lamp, Out
CDMA 1xEVDO connection established
▪ Among the PDAs supporting GSM or CDMA 1xEVDO connection, you may check the connection status at
the GSM/CDMA Status Alert Lamp located on the upper right-hand corner of the PDA.
▪ PDAs Supporting GSM - GSM Status Alert Lamp’s Status Quo
▪ PDAs Supporting CDMA 1xEVDO, CDMA 1xEVDO Status Alert Lamp’s Status Quo
※ Status of wireless LAN is not indicated by the lamp.
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 11 >
BIP-1300
I. Knowing the ProductI. Knowing the Product

9. PDA Specification
1.2m Concrete DropDrop Resistence
Max. 87(min.74) x 218 x 54.5(min.29)mm, 510gDimension
8.4V 2,000mAh Li-ion Battery (2,000mAh x 2cell)Battery
Internal (CDMA, GSM, Bluetooth, WLAN)Antenna
Speaker (Mono), Ear Jack (Mono, 3 Poles)Audio
Touch Screen, Function Keys, Numeric ButtonsInput
2.0M Pixel, FlashCamera
2” Thermal PrinterPrinter
1D (Linear Image Type or Laser Type), 2D (Only PDF 417, Linear Image Type)Barcode Engine
ISO7816, EMV2000 Level 1, 2 Certified Smart Card Reader, 3 SAMsIC Card Reader
ISO7810 (Track1,2,3) Card Reader / Bi-DirectionMSR
IrDA 1.2, Bluetooth Class 2
USB Host (Mini type USB) / Client
RS-232C, SD Slot (Support SDIO)
1 SIM Card Slot, 3 SAM Card Slots
Interface
CDMA 1xEVDO & WLAN (802.11b/g), GSM & WLAN (802.11b/g) Communication
3.5” 260,000 Color 240x320 PixelDisplay
RAM: 128MB, ROM: 128MBMemory
Windows Mobile 5.0OS
Intel PXA270 520MHzCPU
SpecificationSection
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 12 >
BIP-1300
I. Knowing the ProductI. Knowing the Product

9. PDA Specification - Communication
Frequency : 2,402MHz ~ 2,480MHz
Channels : 79 Channels
Arial Power : 0.01mW or Less
Modulation Method : F1D
Bluetooth
Frequency : 2,412MHz ~ 2,472MHz
Channels : 13 Channels
Arial Power : 10mW or Less
Modulation Method : G1D, D2D
Using Certified Module (SWL-2460C)
WLAN
Quad Band (850/900/1800/1900 MHz)
GPRS Multislot Class 12, Class B
EDGE Multislot Class 10, Class B
GSM
CDMA 1xEV-DO (IS-856)
Forward : Up to 2.4Mbps / Reverse: 153.6Kbps
Dual Band
- Cellular : Sending (824.82MHz ~ 848.19MHz) / Receiving (869.82MHz ~ 893.19MHz)
- USPCS : Sending (1850MHz ~ 1910MHz) / Receiving (1930MHz ~ 1990MHz)
Arial Power : 250mW or Less
Modulation Method : G7W
Using Certified Module (CDE-650G)
CDMA EVDO
SpecificationSection
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 13 >
BIP-1300
I. Knowing the ProductI. Knowing the Product

1. Turning On/Off
Power Button
2. Using the Stylus Pen
▪ Stylus Pen is an input device that can be used for selecting, launching, and
moving items on the touch screen LCD.
▪ Pressing the Stylus Pen (Tap): Select or launch an item by touching an icon
on the screen with the tip of the Stylus Pen.
▪ Dragging the Stylus Pen (Drag): Used to select multiple items, select
characters or images by dragging.
▪ Holding the Stylus Pen Down (Tap and Hold): See the functions of the
selected item(s) that show up in a popup box when you tap the screen with
the Stylus Pen.
▪ You can turn on your PDA by pressing the Power Button on the upper
right-hand corner of the keypad.
▪ With the Power turned ON, if you press the Power button for 3
seconds or more the Back Light will turn off.
▪ The Back Light will turn on again if you press the Power button for 3
seconds or more.
▪ You can turn off the PDA by pressing the power button when the
PDA is ON or Back Light is OFF.
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 14 >
BIP-1300
II. Learning the BasicsII. Learning the Basics
※The product can be damaged if you use a pen, nail, pin, etc. instead of the authentic Stylus Pen.
!!

3. Starting the PDA
[Adjusting the Screen] [Windows Mobile Starting Screen]
▪ Optimize the screen input by using the Stylus Pen
on the LCD screen.
▪ When you press the middle of the cross in the center using
the Stylus Pen, the target moves. Press it again precisely
with the Stylus Pen.
▪ Once you complete the initial wizard, you will
see the starting screen as shown below.
Title Bar
Today’s
Section
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 15 >
BIP-1300
II. Learning the BasicsII. Learning the Basics

3. Starting the PDA
[Starting Windows Mobile]
▪ When you press the Start button on the upper left-hand corner of the title bar, the start menu
will appear.
Start
Button
Start Menu
Running
Programs and
Settings
Copyright © 2006 Bluebird Soft, Inc. All Rights Reserved. < 16 >
BIP-1300
II. Learning the BasicsII. Learning the Basics