Pierce PS093 User manual

OWNER’S MANUAL
CATTLE SIREN
PS093
Why register?
• product updates via email
• maintenance reminders via
email
• quick technical service help
if you encounter a problem
LM-0-0033_v1.2_PS093
We want to serve you.
Please register your product at
www.piercearrowinc.com/warranty/product-registration
REGISTER YOUR PRODUCT!

FAQ
What’s the difference between
the PS092BE and the PS093
heavy duty siren?
We improved the structural integrity
of the bracket and added an
environmentally sealed connector.
Do I have to buy a wiring kit?
A wiring kit is available for ease of
installation. Some customers already
have 16 gauge two-way wire, terminals,
switches and breakers. Some don’t have
those parts on hand so we created the
kit. The part number for the wiring kit
is PCHKD.
How loud is the cattle siren?
There are a number of variables to
consider when answering this question.
Wind, weather, terrain, and other factors
will contribute to how far the sound
travels. The heavy duty siren sounds in
at 135 db. To give you an idea of how
loud that is standing a few feet away
from a power mower comes in at 107
db while a jet engine from 100 feet
away is 140 db.
• Extended use over long periods of time shortens the life of the cattle siren.
Designed to be used with the toggle switch.
• When exposed to the elements, do not install upside-down or water will
collect within the siren and your warranty will be voided. Covered cake feeders
are the exception (as long as the siren will be hidden from the elements).
USER WARNING
SPECIFICATIONS
Application Calling in cattle with a loud siren.
Product Dimensions 4.5” x 4.5” x 6.33” Material Type steel
Duty Cycle 10 mins. Decibel Level 135 dB
Warranty 2 years Draw 96W / 8 - 25 amp
2

AVAILABLE WIRING (PCHKD)
• Step 1: Bolt the cattle siren to a
at surface such as a headache
rack or under the hood using (2)
1/4” bolts or (2) #12 self tapping
screws.
• Step 2: Plug the male end
to the female end of the
connectors.
• Step 3: Mount the On-Off
switch in the truck’s cab.
• Step 4: Mount breaker near the
battery using #10 screws.
• Step 5: Run black wire to
negative battery terminal.
• Step 6A: Run the red wire to the
toggle switch and connect with
push on connectors.
• Step 6B: Run the red wire from
the switch to the breaker with
the small terminals.
• Step 6C: Run the red wire from
the breaker to the positive
battery terminal, with the large
terminal.
• NOTE: For installation with
existing wiring, simply cut off
connector and splice in your
wiring.
• (2) 3/8” Ring Terminal
• (2) 1/4” Push-On Terminal
• (1) 2-Pin Connector
• (1) On-Off Switch
• (2) #10 Ring Terminal
• (1) 30 amp Breaker
• (1) 16 gauge Wire, 15’ long with
Connector, Red and Black
INSTALLATION
HEAVY DUTY CATTLE SIREN (PS093)
3

Pierce Arrow Inc. warrants that the goods, equipment,
and merchandise manufactured by Pierce Arrow Inc.
are free from defects in material and workmanship.
The limited warranty includes replacement or repair
of defective mechanical and electrical parts for a pe-
riod of two years from the date of shipment by Pierce
Arrow Inc.
OBTAINING WARRANTY SERVICE
Pierce Arrow Inc. must be notied of any defect before
repair or replacement may be granted. The merchan-
dise must be delivered by the purchaser to Pierce Ar-
row Inc. in Henrietta, Texas at the purchaser’s expense.
Any repairs not made by Pierce Arrow Inc. are not cov-
ered by the limited warranty and are the responsibility
of the purchaser.
Pierce Arrow Inc. reserves the right to repair or replace
defective parts or products in its sole discretion. The
cost of any repairs not covered by the warranty will be
charged to the purchaser.
EXCLUSIONS
All Pierce products are manufactured for a specic in-
tended purpose. The Pierce Arrow Inc. limited warran-
ty does not cover, and Pierce Arrow Inc. is not liable for,
damage arising from any use other than the specic
intended use of each product.
All coolers manufactured by Pierce are warranted for
general cooling, and are not guaranteed to produce
cooling sufcient for any specic purpose or for spe-
cic temperature. Pierce is not liable for any injury
or damage arising from insufciently cooled objects
placed in the cooler, including but not limited to med-
ications and perishables.
The Pierce Arrow Inc. limited warranty does not cover:
• Ongoing maintenance parts or repair due to
normal wear and tear, and
• Any change or defect due to accident, misuse
or any use for which the equipment was not
intended, improper or unauthorized repair,
failure to provide regular maintenance, and
deterioration due to weather or road condi-
tions.
Purchasers should consult their owner’s manual for
safety, installation, operation, and maintenance guide-
lines.
The Pierce Arrow Inc. limited warranty does not cov-
er purchaser’s cost of labor, transportation, shipping
damages, installation or removal costs, down time,
loss of prot or goodwill, or any other special, inci-
dental, indirect, or consequential damages, concerning
or related to any product or part, whether based
upon negligence, strict liability, breach of contract,
breach of warranty, misrepresentation, or any other
legal theory.
Merchandise manufactured by Pierce Arrow Inc.
is not designed or intended for the movement of
people and are not to be used in the operation of
elevators or other improper uses.Any improper use
of the product may void the warranty.
OTHER MANUFACTURERS’ WARRANTIES
Pierce Arrow Inc. makes no warranty, expressed or
implied, to nished products manufactured or sup-
plied by other manufacturers, and sold by Pierce
Arrow Inc. to the purchaser, including but not lim-
ited to, any vehicle to which our product is afxed
and any accessories. Such merchandise is subject
to the manufacturer’s warranty only, which will be
provided upon request.
CONDITIONS OF SALE
When placing an order with Pierce Arrow Inc.,
the terms and conditions provided for payment,
shipping, delivery and claims create an agree-
ment between the purchaser and Pierce Arrow
Inc. The agreement is to be performed in Clay
County, Texas.
RETURNS: No returns are accepted without pri-
or authorization. All items must be returned in
their entirety. Please contact a sales represen-
tative for authorization. Upon authorization, re-
turns must be shipped freight prepaid and may
be subject to a 15% restocking fee. Please do not
send returns COD. No returns will be accepted
later than 30 days from the date of invoice.
DAMAGED GOODS: Pierce Arrow Inc. is not re-
sponsible for, and has no liability for:
• Damage arising during shipment
• Any change or defect due to accident,
misuse or any use for which the equipment
was not intended, improper or unauthorized
repair, failure to provide regular mainte-
nance, and deterioration due to weather or
road conditions.
CLAIMS: Claims for breakage or damages during
shipment must be made to the carrier at the
time of delivery. If a signature is required, you
must notify the driver and sign that there was
damage. You must notify Pierce Arrow Inc. of the
damage promptly so that a claim can be filed.
LIMITED WARRANTY