PIONEER DJ DDJ-400 Quick start guide

Hardware Diagram for djayPRO for Mac
DDJ-400
1-1
1-6 1-7 1-8 1-10
1-2
1-5
1-3
5-1 5-2 5-3 5-4
5-5
3-9
3-10
3-2
3-1
3-3
3-4
3-5
3-7
3-8
2-2
2-3
2-4
2-5
2-6
4-2
3-11
3-6
1-4
3-2
4-1 4-2
1-9
2-1

1,DECK *All the functions assigned on the right deck are the same as those on the left deck shown below. 3,MIXER 4,BROWSER
1
JOG DIAL
1
TRIM
Trim
1
BROWSE
Scroll the Playlist window Switch between My Library, iTunes,
2
EQ (HI, MID, LOW)
EQ (HI, MID, LOW) Spotify, Video and Finder
3
FILTER
Filter Move cursor between the Playlist Move cursor from the Playlist window
4
CUE
Headphone monitor on/off *4 －window and the Library browser tree to the Library browser tree
2
TEMPO
Tempo control
5
CHANNEL FADER
Channel fader
2
LOAD
Load a track Show/Hide the Library side panel *5
3
PLAY/PAUSE
Play/Pause Jump to cue point
6
CROSSFADER
Crossfader Zoom in/out the Playlist window *5
4
CUE
Set/Call cue, Back cue Jump to track start
7
MASTER LEVEL
Master out volume
5SHIFT Shift －8 MASTER CUE Master out monitor on/off －
5,PERFORMANCE PADS
6
LOOP IN/
loop off Loop in Select beats for Auto Beat Loop *1
9
HEADPHONES MIXING
Monitor balance
1
HOT CUE
Hot Cue mode Keyboard mode
4 BEAT loop on Loop cutter 10 HEADPHONES LEVEL Monitor level 2 BEAT LOOP Beat Loop mode Pad FX mode 1
long press 4 Beat Loop on －
11
MIC LEVEL
MIC Level
3
BEAT JUMP
Beat Jump mode Pad FX mode 2
7
LOOP OUT
loop off Loop out Select beats for Auto Beat Loop *1
4
SAMPLER
Sampler mode Key Shift mode
loop on Loop double
5
PAD 1-8
mode
8
RELOOP/
loop off Reloop Active Loop on/off HOT CUE Set/Call Hot Cue Delete Hot Cue
EXIT
loop on Loop exit Select Hot Cue for assigning
9
CUE/LOOP CALL
Select beats for Auto Beat Loop *1 a musical scale
loop on Loop cutter/double Set Hot Cue
10
BEAT SYNC
Beat Sync on/off Tempo range BEAT LOOP Auto Beat Loop on/off *7 Roll *8
2,EFFECT PAD FX 1 Roll *9 －
1 BEAT －－ BEAT JUMP Move Playback position *10 －
2 BEAT －Change BPM value *2 PAD FX 2 Pad FX on *11 －
3
BEAT FX SELECT
Select Manual FX SAMPLER Sampler slot playback *12 Sampler slot pause *12
4
BEAT FX CH SELECT
Select Manual FX channel *3 Change the key of the playing track
5
BEAT FX LEVEL/DEPTH
Manual FX paramter *13
6
BEAT FX ON/OFF
Manual FX on/off *3 Slip Reverse
*1
To turn on the Auto Beat Loop with the set number of beats, you need to activate the loop on the screen of djay.
*2
When the BEAT FX CH SELECT setting is CH1, the BPM value of the track loaded on the left deck is changed.
When the BEAT FX CH SELECT setting is CH2, the BPM value of the track loaded on the lright deck is changed.
When the BEAT FX CH SELECT setting is MASTER, the track where the BPM value is changed is as follows.
When the Crossfader is set at the left edge, the BPM value of the track loaded on the left deck is changed.
When the Crossfader is set at the right edge, the BPM value of the track loaded on the right deck is changed.
*3
When the BEAT FX CH SELECT setting is MASTER, the behavior of
the app when the BEAT FX ON/OFF button is pressed is as follows.
When the BEAT FX ON/OFF button is pressed while the Crossfader is set at the left edge, the Manual FX on the left deck is turned on.
When the BEAT FX ON/OFF button is pressed while the Crossfader is set at the right edge, the Manual FX on the right deck is turned on.
*4
The headphone monitor channel is automatically switched depending on the Crossfader position.
*5
Only if you press the LOAD button on the left side while holding the SHIFT button, the Library side panel can be shown/hidden.
Only if you press the LOAD button on the right side while holding the SHIFT button, the Playlist window can be zoomed in/out.
wheel side Pitch bend
Key up/down KEYBOARD Assign a musical scale to Hot Cues
and play *6
Searchplatter
Group No. Name
Scratch
Group No. Name Function +SHIFT
Key up/down *14KEY SHIFT
Function +SHIFTFunction +SHIFT Group No. Name
rotate
press

*6
The pitch assigned to each pad for KEYBOARD mode is as follows.
*7
The number of beats assigned to each pad for the Auto
*8
The number of beats assigned to each pad for the Roll
Beat Loop during BEAT LOOP mode is as follows.
during BEAT LOOP mode is as follows.
*9
The number of beats assigned to each pad
*10
The number of beats assigned to each pad
*11
The effect type assigned to each pad for PAD FX mode 2
for PAD FX mode 1 is as follows.
for BEAT JUMP mode is as follows.
is as follows.
*12
The sampler slots assigned to each pad for SAMPLER mode
*13
The pitch assigned to each pad for KEY SHIFT mode
*14
The Key up/down function assigned to each pad
is as follows.
is as follows.
for KEY SHIFT mode is as follows.
© 2019 Pioneer DJ Corporation All rights reserved.
Semitone
±0
Semitone
+1
Semitone
+2
Semitone
+3
Semitone
-4
Semitone
-3
Semitone
-2
Semitone
-1
Slot 1 Slot 2 Slot 3 Slot 4
Slot 5 Slot 6
1/2 Beat
(Left)
1/2 Beat
(Right)
1 Beat
(Left)
1 Beat
(Right)
2 Beats
(Left)
2 Beats
(Right)
4 Beats
(Left)
4 Beats
(Right)
Low pass
Filter + Echo
High pass
Filter + Echo Flanger Bit Crusher
Vinyl Stop Slip Reverse Low pass
Filter
High pass
Filter
1/4
Beat
1/2
Beat
1
Beat
2
Beats
4
Beats
8
Beats
16
Beats
32
Beats
1/16
Beat
1/8
Beat
1/4
Beat
1/2
Beat
1
Beat
2
Beats
4
Beats
8
Beats
1/4
Beat
1/2
Beat
1
Beat
2
Beats
4
Beats
8
Beats
16
Beats
32
Beats
Semitone
+4
Semitone
+5
Semitone
+6
Semitone
+7
Semitone
±0
Semitone
+1
Semitone
+2
Semitone
+3 Key Down Key Up