PIONEER DJ DDJ-400 User manual

pioneerdj.com/support/
For FAQs and other support information for this product, visit the above website.
「
djayPRO for Mac」
Audio Setu
p
Guide

C
onnec
ti
ng
t
o a
M
ac
*1 RCA audio cables are not supplied
with the unit.
*2 Adjust the volume of the device* connected
to the [MASTER] output until you have
a volume level you're happy with.
*Speakers with built-in amplifiers, etc.
*3 The [MIC] input supports
only unbalanced input.
*4 If you don't use a microphone, minimize the volume level
using the [MIC LEVEL] knob.
*5 Be sure to use the supplied USB cable
for constant high-level performance.
If your Mac has only a USB Type-C port, you'll need
to use a USB Type-C male to USB-A female cable (sold separately).
Headphones
Speakers with built-in
amplifiers*1,*2
Microphone
*3,*4 Mac
USB cable (supplied)
*5
1

Prior to use (important)
・Download djayPRO for Mac from the App Store. (paid feature)
https://apps.apple.com/us/app/djay-pro-2/id1302002064?mt=12
・If you already have djayPRO for Mac installed, update it to the latest version.
・If your Mac has only a USB Type-C port, you'll need to use a USB Type-C male
to USB-A female cable (sold separately).
・Refer to the Hardware Diagram on the Pioneer DJ support page for functions you can control from the unit.
Precautions
djayPRO for Mac is a DJ software made by Algoriddim GmbH. Refer to the Algoriddim website for the app.
https://www.algoriddim.com/
The URL listed in this guide is as of June 2019 and are subject to change.
System requirements
Supported operating systems: macOS Mojave 10.14, macOS High Sierra 10.13, macOS Sierra 10.12, OS X 10.11 (latest update)
USB port: Your Mac must have a USB 2.0 port to connect with the unit.
Internet connection: You'll need an internet connection for downloading the software and streaming.
For information on the latest system requirements, compatibility and supported operating systems, visit the App Store.
https://apps.apple.com/us/app/djay-pro-2/id1302002064?mt=12
Turn the power on.
First, turn on your Mac. Then, turn on the power of all connected devices such as speakers with built-in
Check the audio device settings
After launching djayPRO for Mac, follow the instructions below to confirm that the unit is recognized as an audio device.
1. Click [ ] on the top-left corner of the screen and open [Audio Device Setting].
2. On the Devices screen, check that the settings are as follows.
2

About trademarks and registered trademarks
・Pioneer DJ is a trademark of PIONEER CORPORATION and is used under license.
・djay and its logo are trade names or registered trademarks of Algoriddim GmbH.
・Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
・App Store is a service mark of Apple Inc.
Other trademarks and trade names are the property of their respective owners.
© 2019 Pioneer DJ Corporation
3