Pioneer AVIC-F60BT User manual

Black plate (1,1)
Operation Manual
NAVIGATION AV PLAYER
AVIC-F60BT
Be sure to read Important Information for the User
first!
Important Information for the User includes the
important information that you must understand before
using this product.
English
<CRB4349-A>1

Black plate (2,1)
Thank you for buying this Pioneer product.
Please read through these instructions so you will know how to operate your model
properly. After you have finished reading the instructions, keep this document in a
safe place for future reference.
Important
The screens shown in the examples may differ
from actual screens, which may be changed
without notice for performance and function
improvements.
Introduction
Manual overview 9
–How to use this manual 9
–Conventions used in this manual 9
–Terms used in this manual 9
Notes on internal memory 10
–Before removing the vehicle
battery 10
–Data subject to erasure 10
–Resetting the microprocessor 10
Basic operation
Checking part names and functions 11
Remote control 12
Use and care of the remote control 13
–Installing the battery 13
Notes on using the LCD panel 13
Adjusting the LCD panel angle 13
Inserting/ejecting/connecting media 14
–Inserting and ejecting a disc 14
–Inserting and ejecting an SD memory
card 14
–Connecting and disconnecting an
iPod 15
–Plugging and unplugging a USB
storage device 15
Startup and termination 15
On first-time startup 16
Regular startup 16
–A message about the map
database 16
Turning off the display 16
How to use the screens 18
–Switching screens using the touch
panel keys 18
–Switching screens using the hardware
buttons 19
Supported AV source 20
Displaying the AV operation screen 20
–Selecting a front source on the AV
source selection screen 21
–Selecting a front source on the source
list 21
–Selecting a rear source 21
Turning off the AV source 21
Changing the display order of source
icons 21
Changing the display order of source
keys 22
Using the touch panel 22
–Using the common touch panel
keys 22
–Operating list screens 22
–Operating the time bar 23
–Operating the on-screen keyboard 23
On first-time startup of the navigation
system 23
How to use the Navigation menu screen
Operating the Navigation menu screen 25
How to use the map
How to read the Map screen 26
Frequently shown route events 26
Seeing the current position on the map 27
Browsing the data field 27
Configuring the driving display 28
Operating the Map screen 28
–Changing the scale of the map 28
–Smart Zoom 29
–Switching between 2D, 3D, and 2D
North up views 29
<CRB4349-A>2
Contents
Engb
2

Black plate (3,1)
–Changing the view angle of the
map 29
–Scrolling the map to the position you
want to see 30
Searching for and selecting a location
Searching for a location by address 31
Searching for Points of Interest (POI) 32
–Searching for POIs using preset
categories 32
–Searching for POIs by categories or
directly from the name of the
facilities 32
–Searching for providers nearby that
offer emergency or roadside assistance
services 34
Selecting a destination from stored
locations 34
Selecting a destination from stored
routes 35
Selecting a location you searched for
recently 36
–History 36
–Smart History 36
Searching for a location using “Combined
Search”36
Searching for a location by coordinates 37
Searching for a location by scrolling the
map 38
Checking and modifying the current
route
Modifying the route 39
–Checking route alternatives when
planning the route 39
–Checking route alternatives for an
existing route 39
–Setting a new starting position for the
route 39
–Editing the list of destinations 40
–Cancelling the current route
guidance 41
Building a route using “Route Planner”41
Checking route information and
preferences 41
–Watching the simulation of the
route 42
Registering and editing locations and
routes
Storing a location in “Saved Location”43
Storing a route in “Saved Routes”43
Saving a location as an alert point 43
Checking useful information about your
trip
Checking useful information 45
Customising preferences of the
navigation
Customising the navigation settings 46
–Restoring the default settings 47
Information on each option of “Settings”47
–“Route Preferences”settings 47
–“Sound”settings 48
–“Warnings”settings 49
–“Navigation Map”settings 50
–“Regional”settings 51
–“Display”settings 51
–“Weather”settings 52
–“Trip Monitor”settings 52
–“Connected Services”settings 52
–“Usage Reports”settings 52
–“Start Configuration Wizard”
settings 52
Registering and connecting a Bluetooth
device
Preparing communication devices 53
Registering your Bluetooth devices 53
<CRB4349-A>3
Engb 3
Contents

Black plate (4,1)
–Searching for nearby Bluetooth
devices 53
–Pairing from your Bluetooth
devices 54
–Connecting to a Bluetooth device
automatically 55
–Deleting a registered device 55
Connecting a registered Bluetooth device
manually 56
Switching visibility 56
Entering the PIN code for Bluetooth wireless
connection 57
Displaying the Bluetooth device address 57
Clearing the Bluetooth memory 57
Updating Bluetooth software 58
Displaying the Bluetooth software
version 58
Using hands-free phoning
Displaying the phone menu 59
–Touch panel keys 59
–Reading the screen 59
Making a phone call 60
–Direct dialling 60
–Calling a number in the phone
book 60
–Dialling from the history 61
–Using the preset dial lists 62
Receiving a phone call 62
–Answering an incoming call 63
Minimising the dial confirmation screen 63
Changing the phone settings 64
–Answering a call automatically 64
–Switching the ring tone 64
–Inverting names in the phone book 64
–Setting the private mode 64
–Adjusting the other party’s listening
volume 65
Using the voice recognition function (for
iPhone) 65
Notes for hands-free phoning 65
iPod / iPhone or smartphone setup
operation
The basic flow of iPod / iPhone or
smartphone setup 67
Setting the device connection method 67
iPod compatibility 67
Android™device compatibility 68
MirrorLink device compatibility 68
Information on the connections and
functions for each device 69
Using the radio
Using the touch panel keys 70
Reading the screen 70
Starting procedure 71
Selecting a band 71
Manual tuning 71
Seek tuning 71
Selecting a preset channel from the preset
channel list 71
Storing broadcast frequencies 72
Storing the strongest broadcast
frequencies 72
Tuning into strong frequencies 72
Searching for an RDS station using PTY
information 73
Receiving traffic announcements 73
Using news programme interruption 74
Tuning into alternative frequencies 75
Limiting stations to regional
programming 76
Switching Auto PI seek 76
–Activating the Auto PI seek for preset
stations 76
Operating with the hardware buttons 77
Playing a disc
Using the touch panel keys (for audio) 78
<CRB4349-A>4
Contents
Engb
4

Black plate (5,1)
Using the touch panel keys (for video) 78
Reading the screen (for audio) 80
Reading the screen (for video) 80
Starting procedure 81
Selecting files from the file name list 81
Playing tracks in random order 81
Setting a repeat play range 81
Switching the media file type 82
Searching for the part you want to play 82
Operating the DVD menu 82
Switching the subtitle language 83
Switching the audio language 83
Frame-by-frame playback 83
Slow motion playback 83
Returning to a specified scene 83
Resuming playback (Bookmark) 84
Operating the DVD menu using touch panel
keys 84
Switching the multi-angle DVD display 84
Selecting the audio output 84
Operating with the hardware buttons 85
Playing compressed audio files
Using the touch panel keys 86
Reading the screen 87
Starting procedure (for Disc) 88
Starting procedure (for USB/SD) 88
Switching the browse mode 88
Selecting files from the file name list 89
Selecting a file from the list related to the
song currently playing (link search) 89
Playing files in random order 89
Setting a repeat play range 89
Switching the media file type 90
Operating with the hardware buttons 90
Playing compressed video files
Using the touch panel keys 91
Reading the screen 92
Starting procedure (for Disc) 92
Starting procedure (for USB/SD) 92
Selecting files from the file name list 92
Setting a repeat play range 93
Frame-by-frame playback 93
Slow motion playback 93
Switching the media file type 93
Operating with the hardware buttons 93
Playing compressed still image files
Using the touch panel keys 94
Reading the screen 94
Starting procedure 94
Selecting files from the file name list 95
Playing files in random order 95
Setting a repeat play range 95
Switching the media file type 95
Setting the slideshow interval 96
Operating with the hardware buttons 96
Using an iPod
Using the touch panel keys (for audio) 97
Using the touch panel keys (for video) 97
Reading the screen (for audio) 98
Reading the screen (for video) 98
Starting procedure 99
Setting the shuffle play 99
Setting a repeat play range 99
Selecting song or video sources from the
playlist screen 99
Using this product’s iPod function from your
iPod 101
Changing the speed of audiobook
playback 101
Displaying lists related to the song currently
playing (link search) 101
Operating with the hardware buttons 101
Playing back music from a music app other
than iPod music, as the iPod source 102
–Using the touch panel keys 102
–Reading the screen 102
<CRB4349-A>5
Engb 5
Contents

Black plate (6,1)
Using MirrorLink
Using the touch panel keys (App control side
bar) 103
Starting procedure 103
Using the audio mix function 104
Using a Bluetooth audio player
Using the touch panel keys 105
Reading the screen 106
Starting procedure 106
Selecting files from the file name list 107
Playing files in random order 107
Setting a repeat play range 107
Operating with the hardware buttons 107
Using an AUX source
Using the touch panel keys 108
Reading the screen 108
Starting procedure 108
Setting the video signal 109
Switching the operation screen 109
Using AV input
Using the touch panel keys 110
Reading the screen 110
Starting procedure (for AV source) 110
Starting procedure (for camera) 111
Setting the video signal 112
Using MIXTRAX
MIXTRAX operation 113
Touch panel keys 113
Selecting an item to play songs 113
Selecting songs not to be played 114
Specifying the playback portion 114
Setting the flash pattern 114
System settings
Navigation info window 115
Setting automatic switching to the navigation
screen 115
Setting the steering wheel control 115
–For steering wheel control adapter for
Pioneer users 116
–For users directly connecting this
product to the vehicle’s steering wheel
control harness 116
Setting the FM tuning step 117
Setting the AM tuning step 118
Activating the Bluetooth audio source 118
Setting the ever scroll 118
Setting AV input 119
Setting the rear view camera 119
–Setting rear view camera
activation 120
–Setting the polarity of the rear view
camera 120
Setting the camera for Camera View
mode 120
Displaying the parking assist
guidelines 121
Setting guidelines on the rear view
image 121
Turning off the demo screen 122
Selecting the system language 123
Setting the beep sound 123
Adjusting the response positions of the
touch panel (touch panel calibration) 123
Adjusting the picture 124
Displaying the firmware version 125
Updating firmware 125
Checking sensor learning status and driving
status 126
Clearing the status 127
Checking the connections of leads 127
Audio adjustments
Using fader/balance adjustment 129
Using balance adjustment 129
Switching sound muting/attenuation 130
Adjusting source levels 130
<CRB4349-A>6
Contents
Engb
6

Black plate (7,1)
Adjusting the filter 132
–Adjusting the front and rear speaker
output 132
–Using the subwoofer output 132
Selecting the listening position 133
Adjusting the speaker output levels
finely 133
Adjusting the time alignment 134
Using the automatic sound leveliser 136
Using the equaliser 136
–Recalling equaliser curves 136
–Customising the equaliser curves 137
–Using the auto-adjusted equaliser 137
Adjusting the equaliser curve automatically
(Auto EQ) 137
–Before operating the Auto EQ
function 138
–Performing Auto EQ 138
Theme menu
Selecting the background display 140
–Changing to the background display
image stored on the external device
(USB/SD) 140
Setting the illumination colour 141
–Selecting the colour from the preset
colours 141
–Creating a user-defined colour 141
Selecting the theme colour 142
Selecting the clock image 142
Changing the preinstalled splash
screen 143
–Changing to the splash screen stored
on the external device (USB/SD) 143
Replicating the settings 144
–Exporting “Theme”settings 144
–Importing “Theme”settings 145
Setting up the video player
Setting the top-priority languages 146
–Setting the subtitle language 146
–Setting the audio language 146
–Setting the menu language 147
Setting the angle icon display 147
Setting the aspect ratio 148
Setting parental lock 148
–Setting the code number and
level 148
Displaying your DivX VOD registration
code 149
Displaying your DivX VOD deregistration
code 150
Automatic playback of DVDs 150
Setting the video signal for the rear view
camera 150
Setting the video output format 151
Language code chart for DVDs 152
Favourite menu
Selecting a shortcut 153
Removing a shortcut 153
Common operations
Setting the time and date 154
Setting the “Sound Retriever”function 154
Changing the wide screen mode 154
Other functions
Selecting the video for the rear display 156
Setting the anti-theft function 156
–Setting the password 156
–Entering the password 157
–Deleting the password 157
–Forgotten password 158
Restoring this product to the default
settings 158
–Restoring the default settings 158
Appendix
Troubleshooting 159
<CRB4349-A>7
Engb 7
Contents

Black plate (8,1)
Error messages 161
Positioning technology 165
–Positioning by GPS 165
–Positioning by dead reckoning 165
–How do GPS and dead reckoning work
together? 165
Handling large errors 166
–When positioning by GPS is
impossible 166
–Conditions likely to cause noticeable
positioning errors 167
Route setting information 169
–Route search specifications 169
Handling and care of discs 169
–Built-in drive and care 170
–Ambient conditions for playing a
disc 170
Playable discs 170
–DVD-Video and CD 170
–AVCHD recorded discs 171
–Playing DualDisc 171
–Dolby Digital 171
Detailed information for playable media 171
–Compatibility 171
–Media compatibility chart 174
Bluetooth 178
SDHC 178
WMA/WMV 178
DivX 178
AAC 179
Android™179
MirrorLink 179
Detailed information regarding connected
iPod devices 179
–iPod and iPhone 179
–Lightning 179
–App Store 179
–iOS 180
–iTunes 180
Using app-based connected content 180
IVONA Text-to-Speech 180
Notice regarding video viewing 180
Notice regarding DVD-Video viewing 180
Notice regarding MP3 file usage 181
Map coverage 181
Using the LCD screen correctly 181
–Handling the LCD screen 181
–Liquid crystal display (LCD)
screen 181
–Maintaining the LCD screen 181
–LED (light-emitting diode)
backlight 181
Display information 183
–Preset Dial menu 183
–System menu 183
–Theme menu 184
–Audio menu 184
–Video Setup menu 185
–Bluetooth menu 185
Specifications 186
<CRB4349-A>8
Contents
Engb
8

Black plate (9,1)
Manual overview
Before using this product, be sure to read Im-
portant Information for the User (a separate
manual) which contains warnings, cautions,
and other important information that you
should note.
How to use this manual
Finding the operation procedure for
what you want to do
When you have decided what you want to do,
you can find the page you need from the Con-
tents.
Finding the operation procedure from
a menu name
If you want to check the meaning of an item
displayed on screen, you will find the neces-
sary page from the Display information at the
end of this manual.
Conventions used in this manual
Before moving on, take a few minutes to read
the following information about the conven-
tions used in this manual. Familiarity with
these conventions will help you greatly as you
learn how to use your new equipment.
!Buttons on this product are described in
ALL CAPITALS,BOLD lettering:
e.g.)
HOME button, MODE button.
!Menu items, screen titles, and functional
components are described in bold with
double quotation marks “”:
e.g.)
“System”screen or “Audio”screen
!Touch panel keys that are available on the
screen are described in bold in brackets [ ]:
e.g.)
[Disc], [AV Source Settings].
!Extra information, alternatives and other
notes are presented in the following for-
mat:
e.g.)
pIf the home location has not been stored
yet, set the location first.
!Functions of other keys on the same screen
are indicated with #at the beginning of the
description:
e.g.)
#If you touch [OK], the entry is deleted.
!References are indicated like this:
e.g.)
=For details of the operations, refer to
How to use the screens on page 18.
Terms used in this manual
“Front display”and “Rear display”
In this manual, the screen that is attached to
the body of this product will be referred to as
the “Front display”. Any additional screen that
is commercially available and can be con-
nected to this product will be referred to as the
“Rear display”.
“Video image”
“Video image”in this manual indicates mov-
ing images of DVD-Video, DivX®, iPod, and any
equipment that is connected to this system
with an RCA cable, such as general-purpose
AV equipment.
“External storage device (USB, SD)”
The SD memory card, SDHC memory card,
microSD card, microSDHC card and USB
memory device are collectively referred to as
the “external storage device (USB, SD)”. If it in-
dicates the USB memory only, it is referred to
as the “USB storage device”.
“SD memory card”
The SD memory card, SDHC memory card,
microSD card and microSDHC card are col-
lectively referred to as the “SD memory card”.
<CRB4349-A>9
Engb 9
Chapter
01
Introduction
Introduction

Black plate (10,1)
“iPod”
In this manual, iPod and iPhone will be re-
ferred to as “iPod”.
Notes on internal memory
Before removing the vehicle
battery
If the battery is disconnected or discharged,
the memory will be erased and must be repro-
grammed.
pSome of the settings and recorded con-
tents will not be reset.
Data subject to erasure
The information is erased by disconnecting
the yellow lead from the battery (or removing
the battery itself).
pSome of the settings and recorded con-
tents will not be reset.
Resetting the microprocessor
CAUTION
Pressing the RESET button resets settings and re-
corded contents to the factory settings.
pDo not perform this operation when a device
is connected to this product.
pSome of the settings and recorded contents
will not be reset.
The microprocessor must be reset under the
following conditions:
!Prior to using this product for the first time
after installation.
!If this product fails to operate properly.
!If there appears to be problems with the op-
eration of the system.
!If your vehicle position is shown on the
map with a significant positioning error.
1 Turn the ignition switch OFF.
2 Press the RESET button with a pen tip
or other pointed implement.
Settings and recorded contents are reset to
the factory settings.
1
1RESET button
<CRB4349-A>10
Engb
10
Chapter
01 Introduction

Black plate (11,1)
Checking part names and
functions
This chapter gives information about the names
of the parts and the main features using the but-
tons.
1 2 3 45 6 7 8
a
b
9
1LCD screen
2VOL (+/–) button
Press to adjust the AV (Audio and Video)
source volume.
3MAP button
!Press to display the Map screen.
=For details of the operations, refer to
How to use the screens on page 18.
4HOME button
!Press to display the Top menu screen.
=For details of the operations, refer to
How to use the screens on page 18.
!Press and hold the HOME button to acti-
vate the voice recognition function.
=For details, refer to Using the voice re-
cognition function (for iPhone) on
page 65.
5MODE button
!Press to switch between the Application
screen and the AV operation screen.
pIf the display cannot switch from the
AV operation screen to the Applica-
tion screen when the MODE button is
pressed, the display will turn off.
=For details of the operations, refer to
How to use the screens on page 18.
!Press and hold to turn the display off.
=For details, refer to Turning off the dis-
play on page 16.
6TRK button
!Press to perform manual seek tuning,
fast forward, reverse and track search
controls.
7hbutton
8RESET button
=For details of the operations, refer to Re-
setting the microprocessor on page 10.
9Auto EQ microphone input jack
Use to connect a microphone for acoustical
measurement.
aDisc-loading slot
Insert a disc to play.
=For details, refer to Inserting and ejecting
a disc on page 14.
bSD card slot
=For details, refer to Inserting and ejecting
an SD memory card on page 14.
<CRB4349-A>11
Engb 11
Chapter
02
Basic operation
Basic operation

Black plate (12,1)
Remote control
3
4
2
1
5
6
7
9
8
b
a
c
1VOLUME (+/–)
2REAR SRC
!Press to cycle through all the available
rear sources.
!Press and hold to turn the rear source
off.
3SRC/OFF
!Press to cycle through all the available
front sources.
!Press and hold to turn the front source
off.
4Source mode select switch
Use to switch the source mode between the
front source and the rear source.
5Thumb pad
Use to select a menu on the DVD menu.
6RETURN
Returns to the specified point and begins
playback from there.
7f
Press to pause or resume playback.
m
For audio
!Press and hold to perform fast reverse.
For video
!Press to perform fast reverse.
!Press to change the fast reverse speed.
n
For audio
!Press and hold to perform fast forward.
For video
!Press to perform fast forward.
!Press to change the fast forward speed.
o
Press to return to the previous track (chap-
ter).
p
Press to go to the next track (chapter).
g
Press to stop playback.
If you resume playback, playback will start
from the point where you stopped. Touch
the key again to stop playback completely.
8FOLDER/P.CH
!Press to select the next or previous disc
or folder.
!Press to recall radio station frequencies
assigned to preset channel keys.
9MUTE
Press to mute. Press again to unmute.
aMENU
Press to display the DVD menu during DVD
playback.
TOP MENU
Press to return to the top menu during DVD
playback.
bAUDIO
Press to change the audio language during
DVD playback.
SUBTITLE
Press to change the subtitle language dur-
ing DVD playback.
ANGLE
Press to change the viewing angle during
DVD playback.
cBAND/ESC
!Press to select the tuner band when
tuner is selected as a source.
<CRB4349-A>12
Engb
12
Chapter
02 Basic operation

Black plate (13,1)
!Press to cancel the control mode of func-
tions.
!Press to switch between media file types
when playing the following types of data:
—Disc
—External storage device (USB, SD)
Use and care of the remote
control
Installing the battery
Slide the tray on the back of the remote con-
trol out and insert the battery with the plus (+)
and minus (–) poles aligned properly.
!When using for the first time, pull out the
film protruding from the tray.
WARNING
!Keep the battery out of the reach of children.
Should the battery be swallowed, consult a
doctor immediately.
!Batteries (battery pack or batteries installed)
must not be exposed to excessive heat such
as sunshine, fire or the like.
CAUTION
!Remove the battery if the remote control is not
used for a month or longer.
!There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
!Do not handle the battery with metallic tools.
!Do not store the battery with metallic objects.
!If the battery leaks, wipe the remote control
completely clean and install a new battery.
!When disposing of used batteries, comply
with governmental regulations or environmen-
tal public institutions’rules that apply in your
country/area.
Notes on using the LCD panel
WARNING
!Keep hands and fingers clear of this product
when opening, closing, or adjusting the LCD
panel. Be especially cautious of children’s
hands and fingers.
!Do not use with the LCD panel left open. If the
LCD panel is left open, it may result in injury
in the event of an accident.
CAUTION
!Do not open or close the LCD panel by force.
This may cause a malfunction.
!Do not operate this product until the LCD
panel has completely opened or closed. If this
product is operated while the LCD panel is
opening or closing, the LCD panel may stop at
that angle for safety.
!Do not place a glass or can on the open LCD
panel. Doing so may break this product.
Adjusting the LCD panel angle
1 Press the hbutton.
The following screen appears.
2 Touch the following keys to adjust the
angle of the LCD panel.
Laying the panel down.
Returning the panel to the upright
position.
<CRB4349-A>13
Engb 13
Chapter
02
Basic operation
Basic operation

Black plate (14,1)
3 Touch the following key.
Returns to the previous screen.
pThe adjusted angle of the LCD panel will be
memorised and the LCD panel will automa-
tically return to that angle the next time the
LCD panel is opened or closed.
Inserting/ejecting/
connecting media
CAUTION
!Do not insert anything other than a disc into
the disc-loading slot.
!Do not insert anything other than SD memory
cards into the SD card slot.
!Ejecting an SD memory card during data
transfer can damage the SD memory card. Be
sure to eject the SD memory card by the pro-
cedure described in this manual.
!Do not press the hbutton when an SD mem-
ory card is not fully inserted. Doing so may da-
mage the card.
!Do not press the hbutton before an SD mem-
ory card has been completely removed. Doing
so may damage the card.
Inserting and ejecting a disc
Inserting a disc
1 Press the hbutton.
The following screen appears.
2 Touch the following key.
Opens the LCD panel.
3 Insert a disc into the disc-loading slot.
The disc is loaded, and the LCD panel closes.
Ejecting a disc
1 Press the hbutton.
The following screen appears.
2 Touch the following key.
The LCD panel opens, and the disc
is ejected.
3 Remove the disc, and press the hbut-
ton.
The LCD panel closes.
Inserting and ejecting an SD
memory card
pThis system is not compatible with the
Multi Media Card (MMC).
pCompatibility with all SD memory cards is
not guaranteed.
pThis product may not achieve optimum per-
formance with some SD memory cards.
Inserting an SD memory card
1 Press the hbutton.
The following screen appears.
2 Touch the following key.
Opens the LCD panel.
3 Insert an SD memory card into the SD
card slot.
Insert it with the label surface face-up and
press the card until it clicks and completely
locks.
<CRB4349-A>14
Engb
14
Chapter
02 Basic operation

Black plate (15,1)
4 Press the hbutton.
The LCD panel closes.
Ejecting an SD memory card
1 Press the hbutton.
The following screen appears.
2 Touch the following key.
Opens the LCD panel.
3 Press the middle of the SD memory
card gently until it clicks.
4 Pull the SD memory card out straight.
5 Press the hbutton.
The LCD panel closes.
Connecting and disconnecting
an iPod
Connecting your iPod
=For details of the connections, refer to the
Installation Manual.
Disconnecting your iPod
%Pull out the cables after confirming
that no data is being accessed.
Plugging and unplugging a USB
storage device
pThis product may not achieve optimum per-
formance with some USB storage devices.
pConnection via a USB hub is not possible.
pA USB cable is required for connection.
Plugging in a USB storage device
1 Pull out the plug from the USB port of
the USB cable.
2 Plug a USB storage device into the USB
cable.
2
1
1USB cable
2USB storage device
Unplugging a USB storage device
%Pull out the USB storage device after
checking that no data is being accessed.
Startup and termination
1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
2 Turn off the vehicle engine to termi-
nate the system.
This product is also turned off.
<CRB4349-A>15
Engb 15
Chapter
02
Basic operation
Basic operation

Black plate (16,1)
On first-time startup
When you use this product for the first time,
select the language that you want to use.
1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
The “Select Program Language”screen ap-
pears.
2 Touch the language that you want to
use on screen.
3 Touch the following key.
Displays the “Smartphone Setup”
screen.
4 Touch the item you want to set.
=For details, refer to Information on the con-
nections and functions for each device on
page 69.
5 Touch the following key.
Displays the Top menu screen.
#If you touch , the display returns to the pre-
vious screen.
Regular startup
%Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
pThe screen shown will differ depending on
the previous conditions.
pIf the anti-theft function is activated, you
must enter your password.
pThe terms appear if the screen displayed
last was the navigation screen.
Read the terms carefully, checking the de-
tails, and then touch [OK] if you agree to
the conditions.
After you touch [OK], the screen that was
displayed just before turning off the ignition
switch (ACC OFF) is displayed.
A message about the map
database
After you start using this product, a message
related to map data may be displayed.
pThis message is displayed the first time you
turn on this product each month.
Turning off the display
You can turn off the display at night or when
the screen is too bright.
%Press and hold the MODE button.
The display turns off.
pIf you touch the screen when the display is
off, it reverts to the original screen.
<CRB4349-A>16
Engb
16
Chapter
02 Basic operation

Black plate (17,1)
<CRB4349-A>17
Engb 17
Chapter
02
Basic operation
Basic operation

Black plate (18,1)
How to use the screens
Switching screens using the touch panel keys
1
2
3
4
7
8
a
b
5
6
9
<CRB4349-A>18
Engb
18
Chapter
02 Basic operation

Black plate (19,1)
Switching screens using the hardware buttons
a
b
9
1
7
1Top menu screen
This is the starting menu to access the de-
sired screens and operate the various func-
tions.
pIf you press the HOME button, the Top
menu screen is displayed.
2Time and date setting screen
You can set the time and date settings.
3Setting menu screen
You can customise the system and audio
settings, etc.
4Phone menu screen
You can access the screen that is related to
hands-free phoning.
5AV source selection screen
You can select the AV source.
6Favourite source icons
You can display the icons of frequently used
sources by dragging the icons to the display
area.
=For details of the operation, refer to
Changing the display order of source
icons on page 21.
7AV operation screen
You can customise the settings for each
source.
8Navigation menu screen
You can specify way points and a destina-
tion.
9Map screen
!You can use this screen to check the cur-
rent vehicle position information and
route to the destination.
!You can customise navigation settings.
pIf you press the MAP button, the Map
screen is displayed.
aApplication operation screen
You can control the smartphone applica-
tions directly on this product.
pIf applications are not available, the Ap-
plication operation screen will not be dis-
played.
bApplication menu screen
This product can switch to the application
menu, on which you can display and oper-
ate the application for a smartphone on the
screen.
<CRB4349-A>19
Engb 19
Chapter
02
Basic operation
Basic operation

Black plate (20,1)
pIf application menus are not available,
the Application menu screen will not be
displayed.
Supported AV source
You can play or use the following sources with
this product.
!Radio (FM, AM)
!CD
!ROM (compressed audio files)
!DVD-Video
!USB
!SD
The following sources can be played back or
used by connecting an auxiliary device.
!iPod
!Bluetooth audio
!AV input (AV)
!AUX
Displaying the AV
operation screen
1 Press the HOME button to display the
Top menu screen.
2 Touch the AV operation key.
1
1AV operation key
The AV operation screen appears.
132
6
4
5
1Displays the source list.
=For details, refer to Selecting a front
source on the source list on page 21.
2Displays the Time and date setting
screen.
=For details, refer to Setting the time and
date on page 154.
3Displays the Setting menu screen.
4Recalls equaliser curves.
=For details, refer to Using the equaliser
on page 136.
5Displays the Phone menu screen.
=For details, refer to Displaying the phone
menu on page 59.
6Shows the navigation information.
The distance to the next guidance point, the
name of the street on which the next gui-
dance point is located, the name of the
street that the vehicle is currently travelling
on, the estimated time of arrival, and warn-
ing icons, etc. are displayed.
pThis is not displayed for some sources.
pThis is not displayed when “Navigation
info window”is set to “Off”.
=For details, refer to Navigation info win-
dow on page 115.
<CRB4349-A>20
Engb
20
Chapter
02 Basic operation