Pioneer AVIC-HD3 User manual

HDD AV NAVIGATION HEAD UNIT
AVIC-HD3
Operation Manual

The screens shown in the examples may differ from the actual screens.
The actual screens may be changed without notice for performance and function
improvements.

1
Introduction
Manual Overview
This manual provides important information you need to make full use of your new navigation system.
The beginning sections outline the navigation system and describe its basic operation. The later sec-
tions describe the details of the navigation functions.
Chapters 9 to 13 describe how to operate the AV functions. Please read these chapters when you use a
disc in the built-in DVD drive or operate the Pioneer audio equipment connected to the navigation sys-
tem.
How to use this manual
Be sure to read the following descriptions
Licence Agreement (Page 5 to 8)
This provides a licence agreement of this software. Be sure to read this before using the software.
About the Data for the Map Database (Page 8)
This provides the date when the Map Database was recorded.
Copyright (Page 9)
This provides the copyright of the Map Database.
About Gracenote®(Page 9)
This provides a licence agreement and copyright of the Gracenote®music recognition service. Be sure
to read this before using this navigation system.
Finding the operation procedure from what you want to do
When you have decided what you want to do, you can find the page you need from the “Table of Con-
tents”.
Finding the operation procedure from a menu name
If you want to check the meaning of each item displayed on the screen, you will find the necessary page
from the “Display Information” at the end of the manual.
Glossary
See the glossary to find the meaning of a term.
Index
The section at the end of this manual provides an index. See each term to find the main pages where it
is stated.

2
Overview for each chapter
Before Using the System
For safety reasons, it is particularly important that you fully understand your naviga-
tion system before using it. Be sure to read this chapter.
1
Basic Operation
Please read this section if you want to operate the navigation system immediately.
It will explain the basics of this system.
This section describes the basic operations for navigation.
How to Read the Map Display
This section describes how to read the map screen, and the method of changing map view or
map scale.
Modifying Map Configurations
The behaviour of your navigation system depends on the map display and guidance settings.
If you need to change any of the current settings, read the relevant section of this chapter.
Setting a Route to Your Destination
This section describes various ways to search for a destination, edit the current route condi-
tions and operate the route during route guidance.
Registering and Editing Locations
You can register and edit the points on the map. This chapter describes how to register a
home location, favourite location or other location, and how to edit the entry in “Address
Book”.
Using Hands-free Phoning
When you are using a mobile phone featuring Bluetooth®technology by connecting the
Bluetooth (sold separately) unit to the navigation system, you can operate your mobile phone
hands-free. This chapter describes the operations related to hands-free phoning.
Modifying the General Settings for Navigation Functions
The behaviour of your navigation system depends a number of general settings for naviga-
tion functions. If you need to change any of the initial settings (default settings), read the rel-
evant section of this chapter.
Using the AV Source (Built-in DVD Drive and Radio)
This section describes how to use DVD-Videos, CDs, MP3, discs and the radio.
Using the AV Source (Music Library)
You can record a music CD to the hard disk drive in the navigation system. This chapter
describes recording music and playing back the recorded music.
2
3
4
5
6
7
8
9
10

3
Using the AV Source (M-CD, iPod®, TV)
This chapter describes the audio source operations that can be used when Pioneer audio
equipment featuring IP-BUS (Multi-CD player, Interface adapter for iPod®, TV tuner) is con-
nected.
Using the AV Source (AV, EXT, AUX)
This chapter describes the audio source operations that can be used when connecting AV
equipment with an RCA connector (AV input), future Pioneer devices (external unit), or auxil-
iary equipment (AUX).
Customising the Audio Setting related with Audio Visual
Using the audio source, various audio-visual settings are available to suit your tastes. This
chapter describes how to change the settings.
Operating Your Navigation System with Voice
This section describes navigation operations, such as searching the destination and per-
forming audio operations by voice.
Appendix
Please read the appendix to learn more about your navigation system and information such
as the availability of after-care. Please see “Display Information” at the end of this manual
to check the details for each item on the menu.
11
12
13
14

4
Terminology
Before moving on, take a few minutes to read the following information about the conventions used in
this manual. They will help you greatly as you learn how to use your new equipment.
• Hardware buttons on your navigation system are described in ALL CAPITAL, BOLD lettering:
e.g.)
MAP button, MENU button.
• Items in the different menus or touch keys available on the screen are described in brackets [ ] and
bold:
e.g.)
[Destination], [Settings].
• Extra information, alternative usages and other notes are presented like this:
e.g.)
❒Touch keys which are not available at this time are greyed out.
• References to sections that describe information related to the current topics are indicated like this:
e.g.)
➲Setting the Route Options ➞Page 27
The tab on the right corner indicates which operation the description is related to: Nav-
igation operation or AV (Audio Visual) source operation.
For example, “NAVI” indicates that the description is related to the operation for navi-
gation control.
“NAVI/AV” indicates that the description is related to both operation for navigation
control and AV control.
About the definition of terminology
“Front Display” and “Rear Display”
In this manual, the screen that is attached to the body of this navigation unit will be referred to as the
“Front Display”. Any additional optional screen that is purchased for use in conjunction with this navi-
gation unit will be referred to as the “Rear Display”.
“Video image”
“Video image” in this manual indicates the moving image from DVD-Video in the built-in DVD drive or
from the equipment that is connected to this system with an AV-BUS or RCA cable, such as a TV tuner
or general-purpose AV equipment.
Colour difference of the map display between day and night
The examples in this manual are illustrated using the daytime display. When driving at night, the col-
ours you see may differ from those shown.
Night display

5
Licence Agreement
PIONEER AVIC-HD3
THIS IS A LEGAL AGREEMENT BETWEEN YOU,
AS THE END USER, AND PIONEER
CORP.(JAPAN) (“PIONEER”). PLEASE READ THE
TERMS AND CONDITIONS OF THIS AGREEMENT
CAREFULLY BEFORE USING THE SOFTWARE
INSTALLED ON THE PIONEER PRODUCTS. BY
USING THE SOFTWARE INSTALLED ON THE PIO-
NEER PRODUCTS, YOU AGREE TO BE BOUND
BY THE TERMS OF THIS AGREEMENT. THE
SOFTWARE INCLUDES A DATABASE LICENCED
BY THIRD PARTY SUPPLIER(S) (“SUPPLIERS”),
AND YOUR USE OF THE DATABASE IS COV-
ERED BY THE SUPPLIERS’ SEPARATE TERMS,
WHICH ARE ATTACHED TO THIS AGREEMENT
(Refer to page 7). IF YOU DO NOT AGREE WITH
ALL OF THESE TERMS, PLEASE RETURN THE
PIONEER PRODUCTS (INCLUDING THE SOFT-
WARE, AND ANY WRITTEN MATERIALS) WITHIN
FIVE (5) DAYS OF RECEIPT OF THE PRODUCTS,
TO THE AUTHORISED PIONEER DEALER FROM
WHICH YOU PURCHASED THEM.
1. GRANT OF LICENCE
Pioneer grants to you a non-transferable, non-
exclusive licence to use the software installed on
the Pioneer products (the “Software”) and the
related documentation solely for your own per-
sonal use or for internal use by your business,
only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the Soft-
ware. You shall not loan, rent, disclose, publish,
sell, assign, lease, sublicence, market or other-
wise transfer the Software or use it in any manner
not expressly authorised by this agreement. You
shall not derive or attempt to derive the source
code or structure of all or any portion of the Soft-
ware by reverse engineering, disassembly,
decompilation, or any other means. You shall not
use the Software to operate a service bureau or
for any other use involving the processing of data
for other persons or entities.
Pioneer and its licensor(s) shall retain all copy-
right, trade secret, patent and other proprietary
ownership rights in the Software. The Software is
copyrighted and may not be copied, even if modi-
fied or merged with other products. You shall not
alter or remove any copyright notice or proprie-
tary legend contained in or on the Software.
You may transfer all of your licence rights in the
Software, the related documentation and a copy
of this Licence Agreement to another party, pro-
vided that the party reads and agrees to accept
the terms and conditions of this Licence Agree-
ment.
2. DISCLAIMER OF WARRANTY
The Software and related documentation are pro-
vided to you “AS IS”. PIONEER AND ITS LICEN-
SOR(S) (for the purpose of provisions 2 and 3,
Pioneer and its licensor(s) shall be collectively
referred to as “Pioneer”) MAKES AND YOU
RECEIVE NO WARRANTY, WHETHER EXPRESS
OR IMPLIED, AND ALL WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR ANY PARTIC-
ULAR PURPOSE ARE EXPRESSLY EXCLUDED.
SOME COUNTRIES DO NOT ALLOW EXCLUSION
OF IMPLIED WARRANTIES, SO THE ABOVE
EXCLUSION MAY NOT APPLY TO YOU. The Soft-
ware is complex and may contain some non-con-
formities, defects or errors. Pioneer does not
warrant that the Software will meet your needs or
expectations, that operation of the Software will
be error free or uninterrupted, or that all non-con-
formities can or will be corrected. Furthermore,
Pioneer does not make any representations or
warranties regarding the use or results of the use
of the Software in terms of its accuracy, reliability
or otherwise.

6
3. LIMITATION OF LIABILITY
IN NO EVENT SHALL PIONEER BE LIABLE FOR
ANY DAMAGES, CLAIM OR LOSS INCURRED BY
YOU (INCLUDING, WITHOUT LIMITATION, COM-
PENSATORY, INCIDENTAL, INDIRECT, SPECIAL,
CONSEQUENTIAL, OR EXEMPLARY DAMAGES,
LOST PROFITS, LOST SALES OR BUSINESS,
EXPENDITURES, INVESTMENTS, OR COMMIT-
MENTS IN CONNECTION WITH ANY BUSINESS,
LOSS OF ANY GOODWILL, OR DAMAGES)
RESULTING FROM THE USE OF OR INABILITY TO
USE THE SOFTWARE, EVEN IF PIONEER HAS
BEEN INFORMED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF THE LIKELIHOOD OF SUCH
DAMAGES. THIS LIMITATION APPLIES TO ALL
CAUSES OF ACTION IN THE AGGREGATE,
INCLUDING WITHOUT LIMITATION BREACH OF
CONTRACT, BREACH OF WARRANTY, NEGLI-
GENCE, STRICT LIABILITY, MISREPRESENTA-
TION, AND OTHER TORTS. IF PIONEER’S
WARRANTY DISCLAIMER OR LIMITATION OF
LIABILITY SET FORTH IN THIS AGREEMENT
SHALL OR FOR ANY REASON WHATSOEVER BE
HELD UNENFORCEABLE OR INAPPLICABLE,
YOU AGREE THAT PIONEER’S LIABILITY SHALL
NOT EXCEED FIFTY PERCENT (50%) OF THE
PRICE PAID BY YOU FOR THE ENCLOSED PIO-
NEER PRODUCT.
Some countries do not allow the exclusion or lim-
itation of incidental or consequential damages,
so the above limitation or exclusion may not
apply to you. This warranty disclaimer and limita-
tion of liability shall not be applicable to the
extent that any provision of this warranty is pro-
hibited by any country or local law which cannot
be preempted.
4. EXPORT LAW ASSURANCES
You agree and certify that neither the Software
nor any other technical data received from Pio-
neer, nor the direct product thereof, will be
exported outside the country or district (the
“Country”) governed by the government having
jurisdiction over you (the “Government”) except
as authorised and as permitted by the laws and
regulations of the Government. If the Software
has been rightfully obtained by you outside of the
Country, you agree that you will not re-export the
Software nor any other technical data received
from Pioneer, nor the direct product thereof,
except as permitted by the laws and regulations
of the Government and the laws and regulations
of the jurisdiction in which you obtained the Soft-
ware.
5. TERMINATION
This Agreement is effective until terminated. You
may terminate it at any time by destroying the
Software. The Agreement also will terminate if
you do not comply with any terms or conditions of
this Agreement. Upon such termination, you
agree to destroy the Software.
6. MISCELLANEOUS
This is the entire Agreement between Pioneer
and you regarding its subject matter. No change
in this Agreement shall be effective unless
agreed to in writing by Pioneer. If any provision of
this Agreement is declared invalid or unenforcea-
ble, the remaining provisions of this Agreement
shall remain in full force and effect.

7
Whereis®Navigation DIGITAL
ROAD MAP DATA LICENCE
TERMS
This Licence relates only to the use of the
Whereis®map navigation digital road data and
not to the navigation system in which it is used.
IMPORTANT
To protect your own interests, please read these
terms and conditions carefully before you com-
mence using the Pioneer In-Car Navigation Sys-
tem (“Navigation System”) containing the
Whereis®mapping data (“Whereis®Data”). If
you are uncertain as to your rights and obliga-
tions under this Licence or you would like any
explanation about them please contact Sensis
Pty Ltd (ABN 30 007 423 912) (“Sensis”) on 1800
819 471. Your licence from Sensis to use the
Whereis®Data (“Licence”) is subject to the
terms and conditions set out below. If you do not
agree to these terms and conditions, return this
package to your place of purchase or call 1800
819 471.
1 GRANT OF LICENCE
1.1 Telstra Corporation Limited (ABN 33 051 775
556) through its agent Sensis grants you a
non-exclusive, non-transferable licence (with
no rights to sub-licence) to use the Whereis®
Data on the terms and conditions contained
in this Licence.
1.2 The Licence commences on the date you start
using the Navigation System and continues
until the Licence ends in accordance with the
terms and conditions set out below.
2RIGHTSOFUSE
2.1 You may:
(a) use the Whereis®Data on any compatible
vehicle navigation system; and
(b) only use the Whereis®Data for personal
use.
2.2 You must not reproduce, reverse compile,
adapt, modify, assign, distribute or publish in
any form the whole or any part of the
Whereis®Data.
2.3 You must take all reasonable steps to prevent
any of the events in clause 2.2 occurring or
any unauthorised copying or use of the
Whereis®Data, and must immediately notify
Sensis if you become aware of any of these
events occurring or of any other infringement
of Sensis’ rights in relation to the Whereis®
Data.
3 PROPERTY AND OWNERSHIP
3.1 All intellectual property rights (including
copyright) in and to the Whereis®Data are
the sole and exclusive property of Sensis (or
its Licensors) and except for the rights
granted to you in this Licence, you will not
acquire any intellectual property or other
rights in or to the Whereis®Data or any part
of the Whereis®Data.
The Whereis®Data incorporates data which
is © Commonwealth of Australia (Geoscience
Australia) 2004. (This data has been used
with the permission of Geoscience Australia.
Geoscience Australia has not evaluated this
data as altered and incorporated within this
device and therefore gives no warranty
regarding its accuracy, completeness, cur-
rency or suitability for any particular pur-
pose).
Melbourne data includes information sourced
from the Department of Treasury and
Finance, Geographic Data Victoria.
4ACCURACYOFDATA
4.1 Sensis will use reasonable care and skill in
providing the Whereis®Data and will provide
the Whereis®Data to you in accordance with
this Licence. However, given the nature of
navigation systems (including the possibility
that a change in traffic conditions could
affect the accuracy of the Whereis®Data)
and the fact that Sensis must obtain some of
the Data from other sources, Sensis cannot
promise that the Whereis®Data will be error
free, complete or up to date.
5SENSIS’LIABILITYTOYOU
5.1 The terms and conditions that apply to the
supply and use of the Whereis®Data are
those that are expressly set out in this
Licence and those implied by consumer pro-
tection laws to the supply and use of the
Whereis®Data that are unable to be
excluded. No other terms apply.

8
5.2 Subject to clause 5.3, Sensis accepts its liabil-
ity to you for breach of these terms and condi-
tions or negligence under the principles
applied by the courts.
5.3 The Whereis®Data is provided to you for the
primary purpose of personal, domestic or
household use, so Sensis does not accept lia-
bility to you for losses that result from the use
of the Whereis®Data in connection with the
conduct of a business. However, Sensis will
accept that liability if it cannot be excluded
under any legislation. Sensis is also not liable
for any loss to the extent that it is caused by
you, for example, through your negligence or
breach of these terms and conditions.
5.4 Sensis is not liable for failing to comply with
the terms and conditions applying to the
Whereis®Data where that failure is caused
by events outside Sensis’ reasonable control,
such as abuse or misuse of the Whereis®
Data, damage to the Whereis®Data caused
by faults in equipment that is not owned by
Sensis, any accident by you or a third party
which damages the Whereis®Data or any
unusual hazards affecting the Whereis®Data
(including exposure to excessive humidity,
heat, cold, dust, food or liquids).
6 YOUR LIABILITY TO SENSIS
6.1 Subject to clause 6.2, you are liable to Sensis
for breach of these terms and conditions or
negligence under the principles applied by
the courts.
6.2 You are not liable for any loss to the extent
that it is caused by Sensis, for example,
through Sensis’ negligence or breach of
these terms and conditions.
7 CANCELLING THE LICENCE
7.1 Sensis may cancel the Licence immediately
by giving you notice if you are in breach of
these terms and conditions.
7.2 Sensis may also cancel the Licence by giving
you as much notice as is reasonably possible
if:
(i) the law requires Sensis to do so; or
(ii) providing the Licence becomes illegal or
Sensis believes on reasonable grounds
that it may become illegal.
7.3 Your rights under this Licence will end as
soon as this Licence is cancelled. Following
cancellation, you must immediately cease
using the Whereis®Data.
Any rights or remedies which existed before
cancellation will continue to exist after can-
cellation.
8GENERAL
8.1 A provision of, or a right under, this Licence
may not be waived except in writing signed by
the party that is waiving the provision or right.
8.2 This Licence will be governed by the laws in
force in Victoria, Australia.
8.3 A reference to a person in this Licence
includes a reference to a firm, corporation or
other corporate body.
About the Data for the Map
Database
• This database was developed and recorded up
to November 2005. Changes to streets/roads
made after that time may not be reflected in
this database.
• It is strictly prohibited to reproduce and use
any part or the whole of this map in any form
without permission from the copyright owner.
• If the local traffic regulations or conditions
deviate from this data, follow the local traffic
regulations (such as signs, indications, etc.)
and conditions (such as construction, weather,
etc.).
• The traffic regulation data used in the map
database applies only to standard sized pas-
senger vehicles. Note that regulations for
larger vehicles, motorbikes, and other non-
standard vehicles are not included in the data-
base.