Pioneer AVH-X7550BT Use and care manual

System Firmware Update Instructions for Pioneer AVH-X7550BT
IMPORTANT
This firmware update (version 8.25) applies only to the Australian model: AVH-X755 0BT
Please download and print these Firmware Update instructions before downloading and installing the firmware
update. It is important that you complete all steps correctly and in the order described below.
If you have any questions, please contact Pioneer Australia Customer Support:1800-672-102 or email us via
pioneerelectronics.com.au
In order to perform this update, the following items are needed:
•Pioneer AVH-X7550BT
•A blank USB storage device (no files), 2 GB or larger in capacity, formatted to FAT32.
•DO NOT turn your unit off or disconnect the USB storage device while the firmware is being updated.
•You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
PROCEDURE
1. Start the vehicle engine.
2. Press the [Home] button.
3. Touch the [AV source] & touch [Off] to source Off.
*This picture shows typical region source. It’s not complete same your region.

4. Touch the [Setting] icon.
5. Select [System information] for select menu of system setting.
6. Select [Firmware information].
7. Confirm current version of the product.
(If the firmware version shows “8.25” or higher, no further action is necessary.)

A. Downloading the Firmware Update Files
1. Download the firmware update files by clicking on the following link and finding your product:
http://bit.ly/1E5UspI
2. Extract the download file.
The Downloaded zip file will produce the following file when decompressed:
“PEH447C.AVH”
B. Updating the Firmware on Your Unit
IMPORTANT
DO NOT perform this firmware update on any other model than AVH-X7550BT
Ensure that the update file is located within the root (top) folder of your USB storage device. There should be
no other files within the USB storage device.
While your unit is being updated, DO NOT turn off the system’s power and DO NOT touch the unit’s touch-
screen as this may result in severe damage to your unit.
DO NOT remove the USB storage device during the firmware update process.
Disconnect any external mobile devices that are currently connected to your unit.
PROCEDURE
1. Connect a blank (formatted) USB storage device to your computer, and then locate and copy the
PEH447C.AVH file onto the USB storage device.
2. Start the vehicle engine.
3. Connect the USB storage device to the USB input on your unit.
4. Press the [Home] button.
5. Touch the [AV source] & touch [Off] to source Off.
*This picture shows typical region source. It’s not complete same your region.

6. Touch [Setting] icon.
7. Select [System information] to select the system setting menu.
8. Select [Firmware Update].
9. Touch [Continue].

10. Read the “WARNING,” then touch the [Start] button to start the update process. If it shows “ERROR” on
the display, try another USB device.
11. After starting, there will be a progress bar while updating.
*Australian consumers will see Ver 08.25

12. Display will show “It succeeded…” when the update is complete.
13. The product will reboot after the update is finished. Do not touch anything even when the screen is
blacked out. After it has finished rebooting, the screen will return to the menu screen.
*This picture shows typical region source. It’s not complete same your region.
14. The firmware update is now complete. Your Pioneer AVH-X7500BT is now ready for use.