Pioneer DEH-P5700MP User manual

Operation Manual
Manual de instrucciones
Multi-CD control High power CD/MP3/WMA player
with RDS tuner
Reproductor de CD/MP3/WMA de alta potencia con
sintonizador de RDS y control de CD m ltiple
DEH-P5700MP
DEH-P5730MP
English Español

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, keep this man-
ual in a safe place for future reference.
Before You Start
About this unit 4
About this manual 4
In case of trouble 4
Features 4
About WMA 5
Protecting your unit from theft 5
Removing the front panel 5
Attaching the front panel 6
Whats What
Head unit 7
Power ON/OFF
urning the unit on 8
Selecting a source 8
urning the unit off 8
Tuner
Listening to the radio 9
Introduction of advanced tuner
operation 10
Storing and recalling broadcast
frequencies 10
uning in strong signals 10
Storing the strongest broadcast
frequencies 11
RDS
Introduction of RDS operation 1
Switching the RDS display 1
Selecting alternative frequencies 1
Using PI Seek 13
Using Auto PI Seek for preset
stations 13
Limiting stations to regional
programming 13
Receiving traffic announcements 14
Using news program interruption 14
Receiving P Y alarm broadcasts 15
P Y list 15
Built-in CD Player
Playing a CD 16
Introduction of advanced built-in CD player
operation 17
Repeating play 17
Playing tracks in a random order 17
Scanning tracks of a CD 17
Pausing CD playback 18
Using compression and BMX 18
Selecting the search method 18
Searching every 10 tracks in the current
disc 19
Using disc title functions 19
Entering disc titles 19
Displaying disc titles 0
Using CD EX functions 0
Displaying titles on CD EX
discs 0
Scrolling titles in the display 0
MP3/WMA/WAV Player
Playing MP3/WMA/WAV 1
Introduction of advanced built-in CD player
(MP3/WMA/WAV) operation 3
Repeating play 3
Playing tracks in a random order 3
Scanning folders and tracks 4
Pausing MP3/WMA/WAV playback 4
Selecting the search method 4
Searching every 10 tracks in the current
folder 5
Using compression and BMX 5
Displaying text information on MP3/WMA
disc 5
Displaying text information on WAV disc 6
Scrolling text information in the display 6
Contents
En

Multi-CD Player
Playing a CD 7
50-disc multi-CD player 7
Introduction of advanced multi-CD player
operation 8
Repeating play 8
Playing tracks in a random order 8
Scanning CDs and tracks 9
Pausing CD playback 9
Using I S playlists 9
Creating a playlist with I S
programming 9
Playback from your I S playlist 30
Erasing a track from your I S
playlist 30
Erasing a CD from your I S
playlist 31
Using disc title functions 31
Entering disc titles 31
Displaying disc titles 3
Using CD EX functions 3
Displaying titles on CD EX
discs 3
Scrolling titles in the display 3
Using compression and bass emphasis 3
Audio Adjustments
Introduction of audio adjustments 33
Using balance adjustment 33
Using the equalizer 33
Recalling equalizer curves 34
Adjusting equalizer curves 34
Fine-adjusting equalizer curve 34
Adjusting loudness 35
Front image enhancer (F.I.E.) 35
Adjusting source levels 36
Initial Settings
Adjusting initial settings 37
Setting the FM tuning step 37
Switching Auto PI Seek 37
Switching the warning tone 37
Switching the auxiliary setting 38
Other Functions
Using the AUX source 39
Selecting AUX as the source 39
Setting the AUX title 39
Additional Information
Understanding built-in CD player error
messages 40
Sound muting 40
CD player and care 40
CD-R/CD-RW discs 41
MP3, WMA and WAV files 41
MP3 additional information 4
WMA additional information 4
WAV additional information 4
About folders and MP3/WMA/WAV files 43
erms 44
Specifications 46
En 3
English
Contents

About this unit
he tuner frequencies on this unit are allo-
cated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other
areas may result in poor reception. he RDS
(radio data system) function operates only in
areas with FM stations broadcasting RDS sig-
nals.
CAUTION
!Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat
could result from contact with liquids.
!ACLASS 1 LASER PRODUCT label is affixed
to the bottom of this unit.
CLASS 1
LASER PRODUCT
!he Pioneer CarStereo-Pass is for use only in
Germany.
!Keep this manual handy as a reference for op-
erating procedures and precautions.
!Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
!Protect this unit from moisture.
!If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
About this manual
his unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. his operation manual will
help you benefit fully from this units potential
and to maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe WARNINGs and CAU-
TIONs in this manual.
In case of trouble
Should this product fail to operate properly,
contact your dealer or nearest authorized Pio-
neer Service Station.
Features
CD playback
Music CD/CD-R/CD-RW playback is possible.
MP3 file playback
You can play back MP3 files recorded on CD-
ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
standard recordings).
!Supply of this product only conveys a li-
cense for private, non-commercial use and
does not convey a license nor imply any
right to use this product in any commercial
(i.e. revenue-generating) real time broad-
casting (terrestrial, satellite, cable and/or
any other media), broadcasting/streaming
via internet, intranets and/or other net-
works or in other electronic content distri-
bution systems, such as pay-audio or
audio-on-demand applications. An inde-
pendent license for such use is required.
For details, please visit
http://www.mp3licensing.com.
Before You Start
En
4
Section
01

WMA file playback
You can play back WMA files recorded on CD-
ROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
standard recordings).
WAV file playback
You can play back WAV files recorded on CD-
ROM/CD-R/CD-RW (Linear PCM (LPCM)/MS
ADPCM recordings).
About WMA
he Windows Media"logo printed on the box
indicates that this unit can play back WMA
data.
WMA is short for Windows Media"Audio
and refers to an audio compression technol-
ogy that is developed by Microsoft Corpora-
tion. WMA data can be encoded by using
Windows Media Player version 7 or later.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered trademarks
of Microsoft Corporation in the United States
and/or other countries.
Notes
!With some applications used to encode WMA
files, this unit may not operate correctly.
!Depending on the version of Windows Media
Player used to encode WMA files, album
names and other text information may not be
correctly displayed.
!here may be a slight delay when starting
playback of WMA files encoded with image
data.
Protectin your unit from
theft
he front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
!If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound.
!You can turn off the warning tone. See
Switching the warning tone on page 37.
Important
!Never use force or grip the display and the
buttons too tightly when removing or attach-
ing.
!Avoid subjecting the front panel to excessive
shocks.
!Keep the front panel out of direct sunlight and
high temperatures.
Removin the front panel
1 Press OPEN to open the front panel.
2 Grip the left side of the front panel and
pull it gentl outward.
ake care not to grip it too tightly or to drop
the front panel and protect it from contact
with water or other fluids to prevent perma-
nent damage.
Before You Start
En 5
English
Section
01

3 Put the front panel into the protective
case provided for safe keeping.
Attachin the front panel
%Replace the front panel b holding it
upright to the unit and clipping it securel
into the mounting hooks.
Before You Start
En
6
Section
01

Head unit
1TA button
Press to turn traffic announcements func-
tion on or off.
Press and hold to turn NEWS function on or
off.
2AUDIO button
Press to select various sound quality con-
trols.
3FUNCTION button
Press to select functions.
4OPEN button
Press to open the front panel.
5a/b/c/dbuttons
Press to do manual seek tuning, fast for-
ward, reverse and track search controls.
Also used for controlling functions.
6LOUDNESS button
Press to turn loudness on or off.
7EQ button
Press to select various equalizer curves.
8BAND button
Press to select among three FM bands and
MW/LW bands and to cancel the control
mode of functions.
916 buttons
Press for preset tuning and disc number
search when using a multi-CD player.
aSOURCE button
his unit is turned on by selecting a source.
Press to cycle through all the available
sources.
bDISPLAY button
Press to select different displays.
cVOLUME
When you press VOLUME, it extends out-
ward so that it becomes easier to turn. o re-
tract VOLUME, press it again. Rotate it to
increase or decrease the volume.
Whats What
En 7
English
Section
0

Turnin the unit on
%Press SOURCE to turn the unit on.
When you select a source the unit is turned
on.
Selectin a source
You can select a source you want to listen to.
o switch to the built-in CD player, load a disc
in the unit (refer to page 16).
%Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Built-in CD playerTelevisionTuner
Multi-CD playerExternal unit 1Exter-
nal unit AUX
Notes
!In the following cases, the sound source will
not change:
When there is no unit corresponding to the
selected source connected to this unit.
When there is no disc in the unit.
When there is no magazine in the multi-
CD player.
When the AUX (auxiliary input) is set to off
(refer to page 38).
!External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. wo external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
!When this units blue/white lead is connected
to the vehicles auto-antenna relay control
terminal, the vehicles antenna extends when
this units source is turned on. o retract the
antenna, turn the source off.
Turnin the unit off
%Press SOURCE and hold until the unit
turns off.
Power ON/OFF
En
8
Section
03

Listenin to the radio
hese are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
his units AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 12).
1Band indicator
Shows which band the radio is tuned to,
MW, LW or FM.
2Frequenc indicator
Shows to which frequency the tuner is
tuned.
3Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
4Preset number indicator
Shows which preset has been selected.
1 Press SOURCE to select the tuner.
Press SOURCE until tuner is selected as the
source.
2 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3 Press BAND to select a band.
Press BAND until the desired band is dis-
played, F1,F2,F3 for FM or MW/LW.
4 To perform manual tuning, briefl press
cor d.
he frequencies move up or down step by
step.
5 To perform seek tuning, press and hold
cor dfor about one second and release.
he tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#You can cancel seek tuning by briefly pressing
either cor d.
#If you press and hold cor dyou can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Note
When the frequency selected is being broadcast
in stereo the stereo (5) indicator will light.
Tuner
En 9
English
Section
04

Introduction of advanced
tuner operation
1Function displa
Shows the function status.
2LOC indicator
Shows when local seek tuning is on.
3Preset number indicator
Shows which preset has been selected.
%Press FUNCTION to displa the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
BSM (best stations memory)REG (regional)
LOCAL (local seek tuning)TA (traffic an-
nouncement standby)AF (alternative fre-
quencies search)NEWS (news program
interruption)
#o return to the frequency display, press
BAND.
#If MW/LW band is selected, you can only se-
lect BSM or LOCAL.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.
Storin and recallin
broadcast frequencies
If you press any of the preset tuning buttons
16you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
%When ou find a frequenc that ou
want to store in memor press one of pre-
set tuning buttons 16 and hold until the
preset number stops flashing.
he number you have pressed will flash in the
preset number indicator and then remain lit.
he selected radio station frequency has been
stored in memory.
he next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
Notes
!Up to 18 FM stations, six for each of the three
FM bands, and six MW/LW stations can be
stored in memory.
!You can also use aand bto recall radio sta-
tion frequencies assigned to preset tuning
buttons 16.
Tunin in stron si nals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Press FUNCTION to select LOCAL.
Press FUNCTION until LOCAL appears in the
display.
2 Press ato turn local seek tuning on.
Local seek sensitivity (e.g., LOCAL 2) appears
in the display.
Tuner
En
10
Section
04

3 Press cor dto set the sensitivit .
here are four levels of sensitivity for FM and
two levels for MW/LW:
FM: LOCAL 1LOCAL 2LOCAL 3
LOCAL 4
MW/LW: LOCAL 1LOCAL 2
he LOCAL 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
4 When ou want to return to normal
seek tuning, press bto turn local seek tun-
ing off.
LOCAL:OFF appears in the display.
Storin the stron est
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 16and
once stored there you can tune in to those fre-
quencies with the touch of a button.
1 Press FUNCTION to select BSM.
Press FUNCTION until BSM appears in the
display.
2 Press ato turn BSM on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning buttons 16in the
order of their signal strength. When finished,
BSM stops flashing.
#o cancel the storage process, press b.
Note
Storing broadcast frequencies with BSM may re-
place broadcast frequencies you have saved
using buttons 16.
Tuner
En 11
English
Section
04

Introduction of RDS operation
RDS (radio data system) is a system for provid-
ing information along with FM broadcasts.
his inaudible information provides such fea-
tures as program service name, program type,
traffic announcement standby and automatic
tuning, intended to aid radio listeners in find-
ing and is tuning in to a desired station.
1TP ( ) indicator
Shows when a P station is tuned in.
2News ( ) indicator
Shows when the set news program is re-
ceived.
3Program service name
Shows the name of broadcast program.
%Press FUNCTION to displa the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
BSM (best stations memory)REG (regional)
LOCAL (local seek tuning)TA (traffic an-
nouncement standby)AF (alternative fre-
quencies search)NEWS (news program
interruption)
#o return to the frequency display, press
BAND.
#If MW/LW band is selected, you can only se-
lect BSM or LOCAL.
Notes
!If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the frequency display.
!RDS service may not be provided by all sta-
tions.
!RDS functions such as AF and A are only ac-
tive when your radio is tuned to an RDS
station.
Switchin the RDS display
When you tune in an RDS station its program
service name is displayed. If you want to know
the frequency you can.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Program service nameP Y information
Frequency
P Y (program type ID code) information is
listed on page 15.
#P Y information and the frequency of the cur-
rent station appears on the display for eight sec-
onds.
#If a P Y code of zero is received from a station,
NONE is displayed. his indicates that the station
has not defined its program contents.
#If the signal is too weak for this unit to pick up
the P Y code, NO PTY is displayed.
Selectin alternative
frequencies
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, the unit will automatically search for a
different station in the same network which is
broadcasting a stronger signal.
RDS
En
1
Section
05

!AF is on as a default.
1 Press FUNCTION to select AF.
Press FUNCTION until AF appears in the dis-
play.
2 Press ato turn AF on.
Press aand AF :ON is displayed.
3 Press bto turn AF off.
Press band AF :OFF is displayed.
Notes
!Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
!When you recall a preset station, the tuner
may update the preset station with a new fre-
quency from the stations AF list. ( his is only
available when using presets on the F1 or F2
bands.) No preset number appears on the dis-
play if the RDS data for the station received
differs from that for the originally stored sta-
tion.
!Sound may be temporarily interrupted by an-
other program during an AF frequency
search.
!AF can be turned on or off independently for
each FM band.
Usin PI Seek
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station
with the same programming. During the
search, PI SEEK is displayed and the output is
muted. he muting is discontinued after com-
pletion of the PI Seek, whether or not a differ-
ent station is found.
Usin Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
!he default setting for Auto PI Seek is off.
See Switching Auto PI Seek on page 37.
Limitin stations to re ional
pro rammin
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programs.
1 Press FUNCTION to select REG.
Press FUNCTION until REG appears in the dis-
play.
2 Press ato turn the regional function
on.
Press aand REG :ON is displayed.
3 Press bto turn the regional function
off.
Press band REG :OFF is displayed.
Notes
!Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
!he preset number may disappear on the dis-
play if the tuner tunes in a regional station
which differs from the originally set station.
!he regional function can be turned on or off
independently for each FM band.
RDS
En 13
English
Section
05

Receivin traffic
announcements
A (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. A
can be activated for both a P station (a sta-
tion that broadcasts traffic information) or an
enhanced other networks P station (a station
carrying information which cross-references
P stations).
1 Tune in a TP or enhanced other net-
works TP station.
When you are tuned into a P or enhanced
other networks P station the P ( ) indica-
tor will light.
2 Press TA to turn traffic announcement
standb on.
Press TA and TA ON appears in the display.
he tuner will stand-by for traffic announce-
ments.
#o turn traffic announcements standby off,
press TA again.
3 Use VOLUME to adjust the TA volume
when a traffic announcement begins.
Rotate it to increase or decrease the volume.
he newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Press TA while a traffic announcement
is being received to cancel the announce-
ment.
he tuner returns to the original source but re-
mains in the standby mode until TA is pressed
again.
#You can also cancel the announcement by
pressing SOURCE,BAND,a,b,cor dwhile a
traffic announcement is being received.
Notes
!You can also turn the A function on or off in
the menu that appears with the pressing of
FUNCTION.
!he system switches back to the original
source following traffic announcement recep-
tion.
!Only P and enhanced other networks P sta-
tions are tuned in during seek tuning or BSM
when A is on.
Usin news pro ram
interruption
When a news program is broadcast from a
P Y code news station the unit can switch
from any station to the news broadcast sta-
tion. When the news program ends, reception
of the previous program resumes.
%Press TA and hold to turn on news pro-
gram interruption.
Press TA until NEWS ON appears in the dis-
play.
#o turn off news program interruption, press
TA and hold until NEWS OFF appears in the dis-
play.
#A news program can be cancelled by pressing
TA.
#You can also cancel the news program by
pressing SOURCE,BAND,a,b,cor dwhile a
news program is being received.
Note
You can also turn on or off news program in the
menu that appears with the pressing of
FUNCTION.
RDS
En
14
Section
05

Receivin PTY alarm
broadcasts
P Y alarm is a special P Y code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code, ALARM appears on the display
and the volume adjusts to the A volume.
When the station stops broadcasting the
emergency announcement, the system re-
turns to the previous source.
!An emergency announcement can be can-
celled by pressing TA.
!You can also cancel an emergency an-
nouncement by pressing SOURCE,BAND,
a,b,cor d.
PTY list
Specific Type of program
NEWS News
AFFAIRS Current affairs
INFO General information and advice
SPORT Sports
WEATHER Weather reports/meteorological infor-
mation
FINANCE Stock market reports, commerce,
trading, etc.
POP MUS Popular music
ROCK MUS Contemporary modern music
EASY MUS Easy listening music
OTH MUS Non-categorized music
JAZZ Jazz
COUNTRY Country music
NAT MUS National music
OLDIES Oldies music, golden oldies
FOLK MUS Folk music
L. CLASS Light classical music
Specific Type of program
CLASSIC Serious classical music
EDUCATE Educational programs
DRAMA All radio plays and serials
CULTURE National or regional culture
SCIENCE Nature, science and technology
VARIED Light entertainment
CHILDREN Childrens
SOCIAL Social affairs
RELIGION Religious affairs or services
PHONE IN Phone In
TOURING ravel programs, not for announce-
ments about traffic problems
LEISURE Hobbies and recreational activities
DOCUMENT Documentaries
RDS
En 15
English
Section
05

Playin a CD
hese are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1Pla time indicator
Shows the elapsed playing time of the cur-
rent track.
2Track number indicator
Shows the track currently playing.
1 Press OPEN to open the front panel.
CD loading slot appears.
#After a CD has been inserted, press SOURCE
to select the built-in CD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
EJECT button
#You can eject a CD by pressing EJECT.
#o avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
3 Close the front panel.
4 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
5 To perform fast forward or reverse,
press and hold cor d.
#If you select ROUGH, pressing and holding c
or denables you to search every 10 tracks in the
current disc. (Refer to Selecting the search meth-
od on page 18.)
6 To skip back or forward to another
track, press cor d.
Pressing dskips to the start of the next track.
Pressing conce skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!he built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
!Do not insert anything other than a CD into
the CD loading slot.
!If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting it again.
!If an error message such as ERROR-11 is dis-
played, refer to Understanding built-in C
player error messages on page 40.
!When a CD EX disc is inserted, the disc and
track titles begin to scroll to the left auto-
matically.
Built-in CD Player
En
16
Section
06

Introduction of advanced
built-in CD player operation
1Function displa
Shows the function status.
2RPT indicator
Shows when repeat play is turned on.
%Press FUNCTION to displa the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)RDM (random play)
SCAN (scan play)PAUSE (pause)COMP
(compression and BMX)FF/REV (search
method)
#o return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeatin play
Repeat play lets you hear the same track or
disc over again.
1 Press FUNCTION to select RPT.
Press FUNCTION until RPT appears in the dis-
play.
2 Press cor dto select the repeat range.
his switches you to the selected setting.
!RPT:DSC Repeat the current disc
!RPT:TRK Repeat just the current track
Note
If you perform track search or fast forward/re-
verse during TRK, the repeat play range changes
to DSC.
Playin tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the
display.
2 Press ato turn random pla on.
RDM :ON appears in the display. racks will
play in a random order.
3 Press bto turn random pla off.
RDM :OFF appears in the display. racks will
continue to play in order.
Scannin tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the
display.
2 Press ato turn scan pla on.
SCAN :ON appears in the display. he first 10
seconds of each track is played.
Built-in CD Player
En 17
English
Section
06

3 When ou find the desired track press
bto turn scan pla off.
SCAN :OFF appears in the display. he track
will continue to play.
#If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.
Pausin CD playback
Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select PAUSE.
Press FUNCTION until PAUSE appears in the
display.
2 Press ato turn pause on.
PAUSE:ON appears in the display. Play of the
current track pauses.
3 Press bto turn pause off.
PAUSE:OFF appears in the display. Play will re-
sume at the same point that you turned pause
on.
Usin compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions
have a two-step adjustment. he COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Press FUNCTION to select COMP.
Press FUNCTION until COMP appears in the
display.
2 Press aor bto select our favorite set-
ting.
Press aor brepeatedly to switch between the
following settings:
COMP OFFCOMP 1COMP 2
COMP OFFBMX 1BMX 2
Selectin the search method
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Press FUNCTION to select FF/REV.
Press FUNCTION until FF/REV appears in the
display.
#If the search method ROUGH has been pre-
viously selected, ROUGH will be displayed.
2 Press cor dto select the search meth-
od.
Press cor duntil the desired search method
appears in the display.
!FF/REV Fast forward and reverse
!ROUGH Searching every 10 tracks
Built-in CD Player
En
18
Section
06

Searchin every 10 tracks in
the current disc
If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
a lot of tracks, you can roughly search for the
track you want to play.
1 Select the search method ROUGH.
Refer to Selecting the search method on the
previous page.
2 Press and hold cor dto search ever
10 tracks on a disc.
#If a disc contains less than 10 tracks, pressing
and holding drecalls the last track of the disc.
Also, if the remaining number of tracks after
searching every 10 tracks is less than 10, press-
ing and holding drecalls the last track of the
disc.
#If a disc contains less than 10 tracks, pressing
and holding crecalls the first track of the disc.
Also, if the remaining number of tracks after
searching every 10 tracks is less than 10, press-
ing and holding crecalls the first track of the
disc.
Usin disc title functions
You can input CD titles and display the title.
he next time you insert a CD for which you
have entered a title, the title of that CD will be
displayed.
Enterin disc titles
Use the disc title input feature to store up to
48 CD titles in the unit. Each title can be up to
8 characters long.
1 Pla the CD that ou want to enter a
title for.
2 Press FUNCTION and hold until TITLE IN
appears in the displa .
#When playing a CD EX disc, you cannot
switch to TITLE IN. he disc title will have already
been recorded on a CD EX disc.
3 Press aor bto select a letter of the al-
phabet.
Each press of awill display a letter of the al-
phabet in A B C ... X Y Z, numbers and sym-
bols in 1 2 3 ... > [ ] order. Each press of bwill
display a letter in the reverse order, such as Z
Y X ... C B A order.
4 Press dto move the cursor to the next
character position.
When the letter you want is displayed, press d
to move the cursor to the next position and
then select the next letter. Press cto move
backwards in the display.
5 Move the cursor to the last position b
pressing dafter entering the title.
When you press done more time, the entered
title is stored in memory.
6 Press BAND to return to the pla back
displa .
Notes
!itles remain in memory, even after the disc
has been removed from the unit, and are re-
called when the disc is reinserted.
!After data for 48 discs has been stored in
memory, data for a new disc will overwrite the
oldest one.
!If you connect a multi-CD player, you can
input disc titles for up to 100 discs.
Built-in CD Player
En 19
English
Section
06

Displayin disc titles
You can display the title of any disc that has
had a disc title entered.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play timeDISC TTL (disc title)
When you select DISC TTL, the title of the cur-
rently playing disc is shown in the display.
#When a CD with a disc title is inserted, the
disc title automatically begins to scroll through
the display.
#If no title has been entered for the currently
playing disc, NO TITLE is displayed.
Usin CD TEXT functions
Some discs have certain information encoded
on the disc during manufacture. hese discs
may contain such information as the CD title,
track title, artists name and playback time
and are called CD EX discs. Only these spe-
cially encoded CD EX discs support the
functions listed below.
Displayin titles on CD TEXT discs
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play timeDISC TTL (disc title)ART NAME
(disc artist name)TRK TTL (track title)
ART NAME (track artist name)
#If specific information has not been recorded
on a CD EX disc, NO XXXX will be displayed
(e.g., NO T-TTL).
Scrollin titles in the display
his unit can display the first 8 letters only of
DISC TTL,ART NAME,TRK TTL and
ART NAME. When the recorded information is
longer than 8 letters, you can scroll the text to
the left so that the rest of the title can be seen.
%Press DISPLAY and hold until the title
begins to scroll to the left.
he rest of the title will appear in the dis-
play.
Built-in CD Player
En
0
Section
06