Pioneer DEH-P7600MP User manual

Operation Manual
Manual de instrucciones
Multi-CD/DAB control High power CD/MP3/WMA
player with RDS tuner
Reproductor de CD/MP3/WMA de alta potencia con
sintonizador RDS y control de CD últiple/DAB
DEH-P7600MP
English Español

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, put them away
in a safe place for future reference.
Before You Start
About this unit 5
About this manual 5
Precautions 5
In case of trouble 5
Features 5
About WMA 6
Protecting your unit from theft 6
Removing the front panel 6
Attaching the front panel 7
About the demo mode 7
Reverse mode 7
Feature demo 7
About the operation mode 7
Whats What
Head unit 8
ptional remote control 9
Power ON/OFF
Turning the unit on 10
Selecting a source 10
Turning the unit off 10
Tuner
Listening to the radio 11
Introduction of advanced tuner
operation 12
Storing and recalling broadcast
frequencies 12
Tuning in strong signals 12
Storing the strongest broadcast
frequencies 13
R S
Introduction of RDS operation 14
Switching the RDS display 14
Selecting alternative frequencies 15
Using PI Seek 15
Using Auto PI Seek for preset
stations 15
Limiting stations to regional
programming 15
Receiving traffic announcements 16
Using PTY functions 16
Searching for an RDS station by PTY
information 16
Using news program interruption 17
Receiving PTY alarm broadcasts 17
Using radio text 17
Displaying radio text 17
Storing and recalling radio text 18
PTY list 19
Built-in C Player
Playing a CD 20
Introduction of advanced built-in CD player
operation 21
Repeating play 21
Playing tracks in a random order 21
Scanning tracks of a CD 21
Pausing CD playback 22
Using compression and BMX 22
Selecting the search method 22
Searching every 10 tracks in the current
disc 23
Using disc title functions 23
Entering disc titles 23
Displaying disc titles 24
Using CD TEXT functions 24
Displaying titles on CD TEXT
discs 24
Scrolling titles in the display 24
MP3/WMA/WAV Player
Playing MP3/WMA/WAV 25
Introduction of advanced built-in CD player
(MP3/WMA/WAV) operation 27
Contents
En
2

Repeating play 27
Playing tracks in a random order 27
Scanning folders and tracks 28
Pausing MP3/WMA/WAV playback 28
Using compression and BMX 28
Selecting folders from the folder title list 28
Selecting the search method 29
Searching every 10 tracks in the current
folder 29
Switching the tag display 29
Displaying text information on MP3/WMA/
WAV disc 30
When playing back an MP3/WMA
disc 30
When playing back a WAV disc 30
Scrolling text information in the display 30
Multi-C Player
Playing a CD 32
50-disc multi-CD player 32
Introduction of advanced multi-CD player
operation 33
Repeating play 33
Playing tracks in a random order 33
Scanning CDs and tracks 34
Pausing CD playback 34
Using ITS playlists 34
Creating a playlist with ITS
programming 34
Playback from your ITS playlist 35
Erasing a track from your ITS
playlist 35
Erasing a CD from your ITS
playlist 35
Using disc title functions 36
Entering disc titles 36
Displaying disc titles 37
Selecting discs from the disc title
list 37
Using CD TEXT functions 37
Displaying titles on CD TEXT
discs 37
Scrolling titles in the display 37
Using compression and bass emphasis 38
Audio Adjustments
Introduction of audio adjustments 39
Compensating for equalizer curves (EQ-
EX) 39
Setting the sound focus equalizer
(SFEQ) 39
Using balance adjustment 40
Using the equalizer 40
Recalling equalizer curves 40
Adjusting equalizer curves 41
Fine-adjusting equalizer curve 41
Adjusting bass and treble 42
Adjusting bass and treble level 42
Selecting bass frequency 42
Selecting treble frequency 42
Adjusting loudness 43
Using subwoofer output 43
Adjusting subwoofer settings 43
Using nonfading output 43
Adjusting nonfading output level 44
Using the high pass filter 44
Adjusting source levels 44
Using automatic sound levelizer 45
Initial Settings
Adjusting initial settings 46
Setting the clock 46
Setting the FM tuning step 46
Switching Auto PI Seek 47
Switching the warning tone 47
Switching the auxiliary setting 47
Switching the dimmer setting 47
Adjusting the brightness 47
En 3
English
Contents

Selecting the illumination color 48
Setting the rear output and subwoofer
controller 48
Switching the telephone muting/
attenuation 49
Switching the Ever Scroll 49
Other Functions
Using the operation mode 2 50
Tuner 50
Built-in CD Player 50
MP3/WMA/WAV and Multi-CD
player 50
DAB 51
Television 51
DVD player and Multi-DVD player 51
AUX 51
Using the AUX source 51
Selecting AUX as the source 51
Setting the AUX title 51
Using different entertainment displays 52
Introduction of DAB operation 53
peration 53
Changing the label 53
perating announcements with the
function menu 53
Available PTY function 54
Using dynamic label 54
Introduction of DVD operation 55
peration 55
Function menu switching 55
Using ITS playlist and disc title
functions 55
Additional Information
Understanding built-in CD player error
messages 56
CD player and care 56
CD-R/CD-RW discs 57
MP3, WMA and WAV files 57
MP3 additional information 58
WMA additional information 58
WAV additional information 58
About folders and MP3/WMA/WAV files 58
Terms 60
Specifications 62
Contents
En
4

About this unit
The tuner frequencies on this unit are allo-
cated for use in Western Europe, Asia, the
Middle East, Africa and ceania. Use in other
areas may result in improper reception. The
RDS function operates only in areas with FM
stations broadcasting RDS signals.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this units potential
and to maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe precautions on this
page and in other sections.
Precautions
!ACLASS 1 LASER PRODUCT label is af-
fixed to the bottom of this unit.
CLASS 1
LASER PRODUCT
!The Pioneer CarStereo-Pass is for use only
in Germany.
!Keep this manual handy as a reference for
operating procedures and precautions.
!Always keep the volume low enough so you
can hear sounds outside of the car.
!Protect this unit from moisture.
!If the battery is disconnected or dis-
charged, the preset memory will be erased
and must be reprogrammed.
In case of trouble
Should this product fail to operate properly,
contact your dealer or nearest authorized Pio-
neer Service Station.
Features
CD playback
Music CD/CD-R/CD-RW playback is possible.
MP3 file playback
You can play back MP3 files recorded on CD-
R M/CD-R/CD-RW (IS 9660 Level 1/Level 2
standard recordings).
!Supply of this product only conveys a li-
cense for private, non-commercial use and
does not convey a license nor imply any
right to use this product in any commercial
(i.e. revenue-generating) real time broad-
casting (terrestrial, satellite, cable and/or
any other media), broadcasting/streaming
via internet, intranets and/or other net-
works or in other electronic content distri-
bution systems, such as pay-audio or
audio-on-demand applications. An inde-
pendent license for such use is required.
For details, please visit
http://www.mp3licensing.com.
WMA file playback
You can play back WMA files recorded on CD-
R M/CD-R/CD-RW (IS 9660 Level 1/Level 2
standard recordings).
Before You Start
En 5
English
Section
01

WAV file playback
You can play back WAV files recorded on CD-
R M/CD-R/CD-RW (Linear PCM (LPCM)/MS
ADPCM recordings).
About WMA
The Windows Media"logo printed on the box
indicates that this unit can play back WMA
data.
WMA is short for Windows Media Audio and
refers to an audio compression technology
that is developed by Microsoft Corporation.
WMA data can be encoded by using Windows
Media Player version 7 or later.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered trademarks
of Microsoft Corporation in the United States
and/or other countries.
Notes
!With some applications used to encode WMA
files, this unit may not operate correctly.
!With some applications used to encode WMA
files, album names and other text information
may not be correctly displayed.
Protectin your unit from
theft
The front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
!If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound.
!You can turn off the warning tone. See
Switching the warning tone on page 47.
Important
!Never use force or grip the display and the
buttons tightly when removing or attaching.
!Avoid subjecting the front panel to excessive
shocks.
!Keep the front panel out of direct sunlight and
high temperatures.
Removin the front panel
1 Press OPEN to open the front panel.
2 Grip the left side of the front panel and
pull it gentl outward.
Take care not to grip it tightly or to drop it.
3 Put the front panel into the protective
case provided for safe keeping.
Before You Start
En
6
Section
01

Attachin the front panel
%Replace the front panel b holding it
upright to this unit and clipping it securel
into the mounting hooks.
About the demo mode
This unit features two demonstration modes.
ne is the reverse mode, the other is the fea-
ture demo mode.
!You cannot cancel a demo mode when the
front panel is open.
Important
The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.
Reverse mode
If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds. Pressing 5numbered button when
power to this unit is turned off while the igni-
tion switch is set to ACC or N cancels the re-
verse mode. Pressing 5numbered button
again to start the reverse mode.
Feature demo
The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or N. Pressing 6
numbered button during feature demo opera-
tion cancels the feature demo mode. Pressing
6numbered button again to start the feature
mode. Remember that if the feature demo
continues operating when the car engine is
turned off, it may drain battery power.
About the operation mode
This unit features two operation modes, opera-
tion mode 1 and 2. peration mode 1 enables
you to operate all the functions of this unit.
peration mode 2 enables you to operate the
basic functions for each source easily. This
manual explains operation mode 1. Please
refer to Using the operation mode 2 on page 50
for operation mode 2.
Before You Start
En 7
English
Section
01

Head unit
1TA button
Press to turn traffic announcements func-
tion on or off.
2VOLUME
When you press VOLUME, it extends out-
ward so that it becomes easier to turn. To re-
tract VOLUME, press it again. Rotate to
increase or decrease the volume.
3DISPLAY button
Press to select different displays.
4TEXT button
Press to turn radio text function on or off.
5FUNCTION button
Press to select functions.
6AUDIO button
Press to select various sound quality con-
trols.
7a/b/c/dbuttons
Press to do manual seek tuning, fast for-
ward, reverse and track search controls.
Also used for controlling functions.
8OPEN button
Press to open the front panel.
9BAND button
Press to select among three FM and MW/
LW bands and cancel the control mode of
functions.
aENTERTAINMENT button
Press to change to the entertainment dis-
play.
bEQ-EX button
Press and hold to switch between EQ-EX
and SFEQ functions. Press to operate each
function.
c16 buttons
Press for preset tuning and disc number
search when using a multi-CD player.
dEQ button
Press to select various equalizer curves.
eSOURCE button
This unit is turned on by selecting a source.
Press to cycle through all of the available
sources.
34
2
1
5
6
7
8
ab
c
d
e
9
Whats What
En
8
Section
02

Optional remote control
The steering remote control CD-SR 00 is sold
separately.
peration is the same as when using the but-
ton on the head unit. See the explanation of
the head unit about the operation of each but-
ton with the exception of ATT, which is ex-
plained below.
fATT button
Press to quickly lower the volume level, by
about 90%. Press once more to return to the
original volume level.
gVOLUME button
Press to increase or decrease the volume.
g
f
6
5
5
5
e
9
9
9
7
7
7
Whats What
En 9
English
Section
02

Turnin the unit on
%Press SOURCE to turn the unit on.
When you select a source the unit is turned
on.
Selectin a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in this unit (refer to page 20).
%Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
AB (Digital Audio Broadcasting)Tuner
TelevisionV player/Multi- V player
Built-in C playerMulti-C player
External unit 1External unit 2AUX
Notes
!In the following cases, the sound source will
not change:
When a unit corresponding to each source
is not connected to this unit.
When no disc is set in this unit.
When no disc is set in the DVD player.
When no magazine is set in the multi-CD
player.
When no magazine is set in the multi-DVD
player.
When the AUX (auxiliary input) is set to off
(refer to page 47).
!External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
!When this units blue/white lead is connected
to the cars auto-antenna relay control term-
inal, the cars antenna extends when this
units source is turned on. To retract the an-
tenna, turn the source off.
Turnin the unit off
%Press SOURCE and hold until the unit
turns off.
Power ON/OFF
En
10
Section
03

Listenin to the radio
1
2
3
4
5
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
This units AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 15).
1Stereo (ST) indicator
Shows that the frequency selected is being
broadcast in stereo.
2LOC indicator
Shows when local seek tuning is on.
3Band indicator
Shows which band the radio is tuned to,
MW, LW or FM.
4Preset number indicator
Shows what preset has been selected.
5Frequenc indicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press BAND to select a band.
Press BAND until the desired band is dis-
played, FM1,FM2,FM3 for FM or MW/LW.
4 To perform manual tuning, press cor
dwith quick presses.
The frequencies move up or down step by
step.
5 To perform seek tuning, press and hold
cor dfor about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#You can cancel seek tuning by pressing either
cor dwith a quick press.
#If you press and hold cor dyou can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.
Tuner
En 11
English
Section
04

Introduction of advanced
tuner operation
1
1Function displa
Shows the function status.
%Press FUNCTION to displa the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
BSM (best stations memory)Regional (re-
gional)Local (local seek tuning)program
type selection (PTY)TA (traffic announce-
ment standby)AF (alternative frequencies
search)News (news program interruption)
#To return to the frequency display, press
BAND.
#If MW/LW band is selected, you can only se-
lect BSM or Local.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the frequency display.
Storin and recallin
broadcast frequencies
If you press any of the preset tuning buttons
16you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
%When ou find a frequenc that ou
want to store in memor press a preset
tuning button 16 and hold until the preset
number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button 16the radio station frequency is
recalled from memory.
Notes
!Up to 18 FM stations, 6 for each of the three
FM bands, and 6 MW/LW stations can be
stored in memory.
!You can also use aand bto recall radio sta-
tion frequencies assigned to preset tuning
buttons 16.
Tunin in stron si nals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Press FUNCTION to select Local.
Press FUNCTION until Local appears in the
display.
2 Press ato turn local seek tuning on.
Local seek sensitivity (e.g., Local 2) appears in
the display.
3 Press cor dto set the sensitivit .
There are four levels of sensitivity for FM and
two levels for MW/LW:
FM: Local 1Local 2Local 3Local 4
MW/LW: Local 1Local 2
The Local 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Tuner
En
12
Section
04

4 When ou want to return to normal
seek tuning, press bto turn local seek tun-
ing off.
Local :OFF appears in the display.
Storin the stron est
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 16and
once stored there you can tune in to those fre-
quencies with the touch of a button.
1 Press FUNCTION to select BSM.
Press FUNCTION until BSM appears in the
display.
2 Press ato turn BSM on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning buttons 16in
order of their signal strength. When finished,
BSM stops flashing.
#To cancel the storage process, press b.
Note
Storing broadcast frequencies with BSM may re-
place broadcast frequencies you have saved
using 16.
Tuner
En 13
English
Section
04

Introduction of RDS operation
1
2
3
4
RDS (radio data system) is a system for provid-
ing information along with FM broadcasts.
This inaudible information provides such fea-
tures as program service name, program type,
traffic announcement standby and automatic
tuning, intended to aid radio listeners in find-
ing and is tuning in to a desired station.
1TXT indicator
Shows when the radio text is received.
2NEWS indicator
Shows when the set news program is re-
ceived.
3TP indicator
Shows when a TP station is tuned in.
4Program service name
Shows the name of broadcast program.
%Press FUNCTION to displa the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
BSM (best stations memory)Regional (re-
gional)Local (local seek tuning)program
type selection (PTY)TA (traffic announce-
ment standby)AF (alternative frequencies
search)News (news program interruption)
#To return to the frequency display, press
BAND.
#If MW/LW band is selected, you can only se-
lect BSM or Local.
Notes
!If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the frequency display.
!RDS service may not be provided by all sta-
tions.
!RDS functions like AF and TA are only active
when your radio is tuned to an RDS station.
Switchin the RDS display
When you tune in an RDS station its program
service name is displayed. If you want to know
the frequency you can.
%Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Program service namePTY information and
frequencyDAB information (DAB informa-
tion and program service name)
PTY (program type ID code) information is
listed on page 19.
#PTY information and the frequency of the cur-
rent station appears on the display for eight sec-
onds.
#If a PTY code of zero is received from a station,
display is blank. This indicates that the station
has not defined its program contents.
#If the signal is too weak for this unit to pick up
the PTY code, the PTY information display is
blank.
#You can only switch to DAB information when
a DAB tuner (GEX-P700DAB) is connected.
RDS
En
14
Section
05

Selectin alternative
frequencies
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, the unit will automatically search for a
different station in the same network which is
broadcasting a stronger signal.
!AF is on as a default.
1 Press FUNCTION to select AF.
Press FUNCTION until AF appears in the dis-
play.
2 Press ato turn AF on.
Press aand AF :ON is displayed.
3 Press bto turn AF off.
Press band AF :OFF is displayed.
Notes
!nly RDS stations are tuned in during seek
tuning or BSM when AF is on.
!When you recall a preset station, the tuner
may update the preset station with a new fre-
quency from the stations AF list. (This is only
available when using presets on the FM1 or
FM2 bands.) No preset number appears on
the display if the RDS data for the station re-
ceived differs from that for the originally
stored station.
!Sound may be temporarily interrupted by an-
other program during a AF frequency search.
!AF can be turned on or off independently for
each FM band.
Usin PI Seek
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station
with the same programming. During the
search, PI SEEK is displayed and the output is
muted. The muting is discontinued after com-
pletion of the PI Seek, whether or not a differ-
ent station is found.
Usin Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
!The default setting for Auto PI Seek is off.
See Switching Auto PI Seek on page 47.
Limitin stations to re ional
pro rammin
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programs.
1 Press FUNCTION to select Regional.
Press FUNCTION until Regional appears in
the display.
2 Press ato turn the regional function
on.
Press aand Regional :ON is displayed.
3 Press bto turn the regional function
off.
Press band Regional :OFF is displayed.
Notes
!Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
!The preset number may disappear on the dis-
play if the tuner tunes in a regional station
which differs from the originally set station.
!The regional function can be turned on or off
independently for each FM band.
RDS
En 15
English
Section
05

Receivin traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other networks TP station (a station
carrying information which cross-references
TP stations).
1 Tune in a TP or enhanced other net-
works TP station.
When you are tuned into a TP or enhanced
other networks TP station the TP indicator will
light.
2 Press TA to turn traffic announcement
standb on.
Press TA and TA ON appears in the display.
The tuner will stand-by for traffic announce-
ments.
#To turn traffic announcements standby off,
press TA again.
3 Use VOLUME to adjust the TA volume
when a traffic announcement begins.
Rotate to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Press TA while a traffic announcement
is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until TA is pressed
again.
#You can also cancel the announcement by
pressing SOURCE,BAND,a,b,cor dwhile a
traffic announcement is being received.
Notes
!You can also turn the TA function on or off in
the menu that appears with the pressing of
FUNCTION.
!The system switches back to the original
source following traffic announcement recep-
tion.
!nly TP and enhanced other networks TP sta-
tions are tuned in during seek tuning or BSM
when TA is on.
Usin PTY functions
You can tune in a station by using PTY infor-
mation.
Searchin for an RDS station by
PTY information
You can search for general types of broadcast-
ing programs, such as those listed on page
19.
1 Press FUNCTION to select program t pe
selection (PTY).
Press FUNCTION until program type appears
in the display.
2 Press cor dto select a program t pe.
There are four program types:
News&InfPopularClassicsOthers
3 Press ato begin the search.
When you press athe program type name in
the display begins to flash. The unit searches
for a station broadcasting that program type.
When a station is found its program service
name is displayed.
#To cancel the search, press b.
RDS
En
16
Section
05

Notes
!The program of some stations may differ from
that indicated by the transmitted PTY.
!If no station is broadcasting the type of pro-
gram you searched for, Not Found is dis-
played for about two seconds and then the
tuner returns to the original station.
Usin news pro ram interruption
When a news program is broadcast from a
PTY code news station the unit can switch
from any station to the news broadcast sta-
tion. When the news program ends, reception
of the previous program resumes.
%Press TA and hold to turn on news pro-
gram interruption.
Press TA until NEWS ON appears in the dis-
play.
#To turn off news program interruption, press
TA and hold until NEWS OFF appears in the dis-
play.
#A news program can be cancelled by pressing
TA.
#You can also cancel the news program by
pressing SOURCE,BAND,a,b,cor dwhile a
news program is being received.
Note
You can also turn on or off news program in the
menu that appears with the pressing of
FUNCTION.
Receivin PTY alarm broadcasts
PTY alarm is a special PTY code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code, ALARM appears on the display
and the volume adjusts to the TA volume.
When the station stops broadcasting the
emergency announcement, the system re-
turns to the previous source.
!An emergency announcement can be can-
celled by pressing TA.
!You can also cancel an emergency an-
nouncement by pressing SOURCE,BAND,
a,b,cor d.
Usin radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the name of the currently broadcast
song and the name of the artist.
!The tuner automatically memorizes the
three latest radio text broadcasts received,
replacing text from the least recent recep-
tion with new text when it is received.
Displayin radio text
You can display the currently received radio
text and the three most recent radio text.
1 Press TEXT to displa radio text.
Radio text for the currently broadcasting sta-
tion is displayed.
#You can cancel radio text display by pressing
TEXT or BAND.
#When no radio text is received, NO TEXT is
displayed.
2 Press cor dto recall the three most re-
cent radio text.
Pressing cor dswitches between the current
and the three radio text data displays.
#If there is no radio text data in memory the dis-
play will not change.
3 Press aor bto scroll.
Press ato go to the beginning. Press bto
scroll the radio text data.
RDS
En 17
English
Section
05

Storin and recallin radio text
You can store data from up to six radio text
transmissions at buttons 16.
1 Displa the radio text ou want to
store in memor .
Refer to Displaying radio text on the previous
page.
2 Press an of 16 and hold to store the
selected radio text.
The memory number will display and the se-
lected radio text has been stored in memory.
The next time you press the same 16button
in the radio text display the stored text is re-
called from memory.
RDS
En
18
Section
05

PTY list
General Specific Type of program
News&Inf News News
Affairs Current affairs
Info General information and advice
Sport Sports
Weather Weather reports/meteorological information
Finance Stock market reports, commerce, trading, etc.
Popular Pop Mus Popular music
Rock Mus Contemporary modern music
Eas Mus Easy listening music
Oth Mus Non categorized music
Jazz Jazz
Countr Country music
Nat Mus National music
Oldies ldies music, golden oldies
Folk mus Folk music
Classics L. Class Light classical music
Classic Serious classical music
Others Educate Educational programs
Drama All radio plays and serials
Culture National or regional culture
Science Nature, science and technology
Varied Light entertainment
Children Childrens
Social Social affairs
Religion Religion affairs or services
Phone In Phone In
Touring Travel programs, not for announcements about traffic problems
Leisure Hobbies and recreational activities
Document Documentaries
RDS
En 19
English
Section
05

Playin a CD
1
2
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1Track number indicator
Shows the track currently playing.
2Pla time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press OPEN to open the front panel.
CD loading slot appears.
#After a CD has been inserted, press SOURCE
to select the built-in CD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
EJECT button
#You can eject a CD by pressing EJECT.
#To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
3 Close the front panel.
4 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5 To perform fast forward or reverse,
press and hold cor d.
#If you select the search method to
ROUGH SEARCH, pressing and holding cor d
enables you to search every ten track in the cur-
rent disc. (Refer to Selecting the search method
on page 22.)
6 To skip back or forward to another
track, press cor d.
Pressing dskips to the start of the next track.
Pressing conce skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
!Do not insert anything other than a CD into
the CD loading slot.
!If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting the disc
again.
!If the built-in CD player does not operate prop-
erly, an error message such as ERROR-11
may be displayed. Refer to Understanding
built-in CD player error messages on page 56.
!When a CD TEXT disc is inserted, the disc and
track titles automatically begin to scroll in the
display. When Ever Scroll is set to N at the
initial setting, the disc and track titles scroll
continuously. About Ever Scroll, refer to
Switching the Ever Scroll on page 49.
Built-in CD Player
En
20
Section
06