Pioneer P1280 - CDX CD Changer User manual

P,oneer sound vision. soul
MULTI-COMPACT
DISC PLAYER COMPACT DISC POUR MULTI-LECTURE
CDX-P1280
CDX-P680
Owner's Manual
Mode d'emploi
<KFJFF/OOHOOOOO> <CRD3728-A/N> UC
This product conforms to CEMA cord colors.
Le code de couleur des cables utilise pour ce produit est conforme a
CEMA.

Precautions/Precautions
---------
Information to User
Alteration or modifications carried out without appropriate
authorization may invalidate the user's right to operate the
equipment.
__ ._. ... _, ----J
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
THE USE
OF OPTICAL INSTRUIV1ENTS WITH THIS PRODUCT
WILL INCREASE EYE HAZARD .
•When driving on
an uneven road, the player may not reproduce every
sound properly.
oDuring winter the inside of the vehicle may be very cold. If the heater
is turned on and the player is used soon after, the disc
or optical parts
(prism, lens, etc.)
may become misted up, and the player will not oper-
ate correctly. If the disc is misted up,
wipe it with asoft cloth. Ifthe
optical parts are misted up,
wait for about an hour for them to warm
up. They will return to their normal condition.
---_._--_ ... _--------_ .. -_.,_ ... _---------
After-sales service for Pioneer products
Please contact the dealer or distributor from where you purchased
the product
for its aftersales service (including warranty conditions)
or any other information. In case the necessary information is not
available, please contact the companies listed below:
Please do not ship
your product to the companies at the addresses
listed
below for repair without advance contact.
USA CANADA
Pioneer Electronics (USA), Inc.
CUSTOMER SUPPORT DIVI
SION
P.O.
Box 1760,
Long Beach, CA 90801-1760,
(BOO) 421·1404
Pioneer Electronics of
Canada, Inc.
CUSTOMER SATISFACTION
DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R OP2
(90S) 479-4411
'I -877-283-5901
For wan'anty information plea:;e see ihe Limited Warranty sheet
included
with your product.
CAUTION:
With this player, you can use the ITS functions to store up to 99
tracks per disc.
Even
if the Head unit's manual indicates ITS memory is up to 24
tracks per disc, this player can store up to 99 tracks per disc.
When playing aCD TEXT disc on this product, display of Title
indications in the head unit's display is possible. For details con-
cerning CD TEXT discs, refer to the head unit's owner's manual.
This product conforms to the track skip function of the CD-R disc.
The tracks containing the irack skip information are skipped over
automatically.
Important
The serial number of this device is locClted on the rear of the unit.
For youl own security and conveniell(8, be Slife to record this nUIll-
bel' on the enclosed warranty card

Precautions when handling magazines
•Do not put the magazine in aplace where it will be exposed to
high temperatures or direct sunlight
•Do not disassemble the magazine.
•Take care
not to drop the magazine or knock it against anything.
•Do not use cracked or warped trays.
•Never
insert anything other than discs. Do not attach alabel or
tape to adisc.
•The use
of benzine, thinner, insecticide, or other volatile chemi-
cals
may damage the magazine surface.
Extra magazines
If you need more magazines, please ask your nearest dealer for
magazine JD-1212S. (for CDX-P1280) or JD-612V (for CDX-P680)
Attaching the label
Attach the supplied label in the specified position. Attaching the
label in an incorrect place
or attaching more than one label will
cause malfunction.
Inserting discs
• Be sure to remove the disc before changing adisc tray.
•If the
tray is not aligned with the right and left grooves, it cannot
be pushed to the end. Do not bend or force the tray.
•
Always load 12 trays in amagazine to prevent loss or warping of
trays.
•
If you load adisc with the label generally printed in black facing
down, not only will the player not be able to recognize whether
the disc is set or not, but also, if you have amulti-CD controller,
the controller will not display an error message to let you know
about it So make sure all the discs in each magazine have their
label sides facing up.
Loading and removing the magazine
•Do not put your fingers in the magazine tray as this may lead to
incorrect operation and damage to the player.
~ If the label on the magazine is coming off or wrinkled up, it may
damage the eject mechanism, and in some cases, the magazine
may not be ejected. Therefore, remove adamaged label com-
pletely before use.
oNever leave the door open while playing discs. The entry of dirt,
dust,
or any other foreign matter into the player may cause it to
fail.

Discs/Disques
~: ::.
r!lCOMPACT
r!lCOMPACT l.QjO~(]5
l.Qj 0 ~ (]5 DIGITAL AUDIO
DIGITAL AUDIO ITEXT I
•Use only use magazines and discs carrying the above marks.
•This product is designed
for use with conventional, fully circular CDs
only. Use of shaped CDs are not recommended for this product.
<9
~
•Check all CDs before playing, and discard cracked, scratched or
warped discs.
•
Avoid touching the recorded (iridescent) surface when handling
discs.
•Do
not affix labels or apply chemicals to discs.
•Wipe dirty or damp
discs outward from the
center with asoft cloth.
•Keep discs
out of direct sunlight and high temperatures.
•
Normal playback of CD-R discs other than those recorded with a
music CD recorder may not be possible.
•Playback
of music CD-R discs, even those recorded with a music
CD recorder, may not be possible with this product due to disc
characteristics
or scratches or dirt on the disc. Dirt or
condensation on the lens inside this product may also prevent
playback.
•Read the precautions
with the CD-R discs before using.

Loading amagazine in the multi CD player/Mise en place
The figure shows this product with CDX-P1280 as an example.lL'illustration montre, atitre d'exemple
Inserting discs/Mise en place des disques
Hold down the mag-
azine lock button
and pull the tray out.
Disc tray
Plateau
Jnsert,discs wjth the laO\'llside up,
Introduisez les disques de fayon que
I'etiquette so it toumee vers Ie haul.
~
"""=---
Ordre des
12 disques
I
l1st to 12th
~ discs
6
7
8
9
10
IJ
12
Appuyez sur Ie bou-
ton de verrouillage
et tirez a vous un
plateau.
Slide out the disctray
Extr lateau it disque
(, .. !"'.;
1
Rell)arque surJes diSques de 8cm:
•N'utilisez pas d'ad~ptafeurpo4rpisqu~ de'8 .
em, faute de
quoile lebfeur p6urri:litpep.8$ ?'Q;
fonetionner. Pourrnettre~l1pla'Ce:undi$que 'S
de 8cm, vousdeyez,utili~erun pl&teau'spg->
cial(numero depieee CXB59B1),L,ese'i"\liceg',
d'ehtretien Pioneervol,ls renseigmlra'utile-,;
•
menta ee sujet. ' 'p'
Notes on 8-em (3-inchl CDs
•Do notuse an 8-em CD adapter. If it is
used, the
player may fail. To load an 8-em
CD, you need aspecial 8-em CD tray (Part
No. CXB5931). Ask your Pioneer service
station about it.
~.8.,m,~ ... :,.
~
Changing disc trays/Remplacement des plateaux pour disque
Disc tray
Plateau
Gently PIJ]J the disc tray out.
Tirez doucement Ie plateau avous.
Align the disc tray with the left and right
grooves, and.pushit in until you hear it click.
....... _..,;.. __ ,.~""'·.;.;';~"'m.'"'"""'".' .,. _, ~ .. -.. __ •
Engagez a fond Ie plateau pour disque dans
les rainures droite et gauche.

Slide and open the door.
Open it fully until it locks with a
click.
Faites glisser
Ie volet.
Ouvrez-Ie
completement; il se ver-
rouille et vous entendez un dedic.
Introduisez Ie chargeur
de maniere que la face
portant la fleche soit
tournee vers Ie haul.
Load the magazine and close the
door.
Insert the magazine i
with the arrow upward. 1
I
Loading the magazine/Mise en place d'un chargeur
2
,
.' .. -_..,.; ~ 'w_, ..• _.,_ . .-,.~""""--~ ~ _..;. ~~
To remove the magazine/Pour retirer Ie chargeur
Press the eject hutton
Appuyez sur Ie bouton d'ejection.

Transportation of multi-CD Player/
Transport du lecteur de CD achargeur
Transport screw
~~~lM~1~? ~~~ .~~~Jr."k!g~illi~t.~~~j\l;r.~:.!.':::~~<:~It~~~Ii£E1ii!1L_Jl!11L. __
Vis de transport
Replacez ces vis dans leur position d'origine avant de transporter I'appareil.
"0
~
A transport screw has been attached to the set in order to protect it
during transportation. After removing the transport screw, cover the
hole with the supplied seal. Be sure to remove the transport screw
before mounting the set. The removed transport screw should be
retained in
the accessory bag for use the next time the set is trans-
ported.
Des vis
sont fixees sur Ie lecteur de fa~on a Ie proteger pendant Ie
transport. Aprils avoir retire une vis de transport, bouchez Ie trou au
moyen du cache fourni. Veillez aretirer ces vis avant d'installer Ie
lecteur. Conservez les vis dans Ie sac contenant les accessoires de
maniere ane pas les egarer et aetre en mesure de les remettre en
place en cas de transport.

Error Mode/Codes d'erreur
If there is a problem with CD play, error codes will be displayed on
connected
CD controller's display
(ex. E-ll, Err-ll, ERR-ll, ERROR-ll).
If an error is displayed, refer to the table below to identify the prob-
lem. If the error is displayed even after corrective action is taken,
contact
your dealer or the nearest authorized PIONEER Service
Station.
En cas d'anomalie pendant la lecture d'un disque, un code d'erreur
est affiche par Ie controleur relie au lecteur
(par exemple,
E-l1, Err-ll, ERR-ll, ERROR-11).
En ce cas, reportez-vous au tableau suivant pour connaitre la cause
de I'anomalie. Si Ie code
d'erreur demeure affiche apres que vous
avez pris les mesures correctives, adressez-vous 8un centre
d'entretien Pioneer.
E: Error number
C: Cause
T: Treatment
E: 11,12,14,17,30
C: The disc is dirty.
T: Clean the disc.
E: 11,12,17,30
C: The disc is scratched.
T: Replace
the disc.
E: 11,12,14,17
C: The disc is inserted with the label side down.
T: Insert the disc with the label side up.
E: 14
C: An unrecorded CD-R is being used.
T: Check the disc.
E: 44
C: All tracks are setting track skip.
T: Replace the disc.
E: NO DISC
C: An empty magazine is in the multi CD player.
T: Insert discs into the magazine.
E: 10,11,12,14,17,19,30,50,60,70, AO, Al
C: Electrical or mechanical fault.
T: Turn the car ignition switch off and on again, or press the source
switch on the multi-CD controller to set CD playback again.
N: Code
d'erreur
C: Cause
M:
Mesure corrective
N: 11,12,14,17,30
C: Le disque est sale.
M: Nettoyez Ie disque.
N:
11,12,17,30
C: Le disque est raye.
M: Remplacez
Ie disque.
N: 11, 12, 14,
17
C: Le disque aete mis en place de telle maniere que I'etiquette est
tournee vers Ie bas.
M: Placez
Ie disque de fa(:on que I'etiquette soit tournee vers Ie hant.
N: 14
C: Le disque, un CD-R, ne porte aucun enregistrement.
M: Verifiez Ie disque.
N:
44
C: Toutes les plages sont reglees comme plage 8sauter.
M: Remplacez Ie disque.
N: NO DISC
C: Le chargeur est vide.
M: Introduisez un
chargeur contenant des disques.
N:
10,11,12,14,17,19,30,50,60,70, AO, Al
C: Anomalie electrique ou mecanique.
M: Placez Ie contacteur d'allumage sur la position Arret puis 8 nou-
veau sur la position Marche, ou encore appuyez sur Ie selecteur
de source
du controleur pour lecteur de CD 8chargeur.
Specifications/Specifications
General
(CDX-P1280)
System Compact disc audio system
Usable discs Compact Disc
Signal
format Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
Power source 14.4 V DC
(10.8 - 15.1 Vallowable)
Max.
current consumption 1.0 A
Weight 2.2 kg (4.9 Ibs.)
Dimensions 257 (W) x94 (H) x170 (D) mm
[10-1/8 (W) x3-3/4 (H) x6-3/4 (D) in.]
(CDX-P680)
System Compact disc audio system
Usable discs Compact Disc
Signal
format Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
Power source 14.4 V
DC
(10.8 - 15.1 Vallowable)
Max.
current consumption 1.0 A
Weight 1.9 kg (4.2 Ibs.)
Dimensions 248 (W) x 66 (H) x168 (D) mm
[9-3/4 (W) x2-5/8 (H) x6-5/8 (D) in.l
Audio
Frequency characteristics 5 - 20,000 Hz (± 1dB)
Signal-to-noise ratio 92 dB
(1 kHz) (IHF-A Network)
Distortion 0.006 %
Dynamic range 90 dB (1 kHz)
Output level 1,000 mV (1 kHz, °dB)
Number of channels .. 2(stereo)
Generalites
(CDX-P1280)
Systeme Compact Disc Digital
Audio
Disques utilisables Compact Disc
Format du signal Frequence
d'echantillonnage: 44,1 kHz
Nombre de bits de quantification: 16;
(quantification lineaire)
Alimentation 14,4 V CC
(toute tension comprise entre 10,8 et 15,1 Vest admissible)
Consommation maximale 1,0 A
Poids 2,2 kg
Dimensions 257 (L) x94 (H) x170 (P) mm
(CDX-P680)
Systeme
Compact Disc Digital Audio
Disques utilisables Compact Disc
Format du signal Frequence d'echantillonnage: 44,1 kHz
Nombre de bits de quantification: 16;
(quantification Iineaire)
Alimentation 14,4 V CC
(toute tension comprise entre 10,8 et 15,1 Vest admissible)
Consommation maximale 1,0 A
Poids 1,9 kg
Dimensions 248 (l) x66 (H) x168 (P) mm
Audio
Reponse en frequence 5 Hz 820 kHz (± 1dB)
Rapport
signal/bruit 92 dB (81kHz) (reseau IHF-A)
Distorsion 0,006%
Dynamique 90 dB (81kHz)
Niveau de sortie 1.000 mV (81kHz, °dB)
Nombre de voies 2(stereo)
Note:
Specifications and design are subject to possible modification with-
out prior notice due to improvements.
Note:
Afin d'amelioration, les caracteristiques et la presentation peuvent
etre modifiees sans avis prealable.

Connecting the {lnits/Connexion des appareils
IP-BUS (nair)
lP'8US,(black)
Black (ground)
_______ To the vehicle (metal) nady.
Nair (masse)
Vers la carrosserie (masse) du vehicule.
6m (1ft. 12in.l
~
Cable Ip·BUS
Pour eviter toute erreur de branchement, Ie cote
entree du cable IP-BUS est bleu et
Ie cote sortie est
noir, Tenez
compte de ces couleurs 101'5 des rac-
cordements.
IP-BUS cable
To pl'event incorrect connection, the
input side of
the IP-BUS connector is colored in blue, and the
output side in black. Connect the connectors of the
same
colors GOrrectly,
Fuse
holder
Porte·fusible
Yellow
To the terminal always supplied with power
regardless of ignition switch position.
Jaune
Vers une borne alimentee en permanence,
independamment de la position de la cle de
contact.
Controleur pour lecteur de CD it chargeur
Multi·CD controller
(._» ...• ".".i ~ •• __ .~."." ••. ",;.; __ '_~ .. __ ~"~~'~.* ~"' ___
'I Cords for this prQd.
Q
.. ·. ct .. :a. n .•. d ... :.th.OS.J~. • . ".
may be different colorseveniH
function. When cOllnectlpg,
I
'product, refer
to th!'\~\.IppJi,eq
of both products ariel cq~he¢tc()r
,same function.
'I Les cables de cetappatE111 et¢e,LI>( /
peuvent fort bien ne pasetredelll'
Ibien que rempli$sant larneme:fol'lc
I cetappareil a \.In C!utreC!Pp~re.jI,!J '
d'installation dediacurieteffe .....
raccordements en ne tenant compt'e:gue'Q
I fonction de chaq\.le dible. . '. '.. .: ,',/\;.
\Jnk@ljft1\IflillJtM1LMi\t~n:fWC ~T.w4illiJj;Bl1IIltL1L,_J.It!l£ttt@t§f M~t~~

•Before mounting, connect the units temporarily. Check that the
units are connected correctly by operating the multi-CD controller.
• After connection is complete, press the clear buttons on the play-
er and
the multi-CD controller with the tip of apencil.
• Be sure to connect the ground lead (black) to the vehicle body or
some other metal part that is properly grounded to the chassis. If
the ground lead is not properly connected, noise may occur or the
player or multi-CD controller may not operate correctly.
• This product is for vehicles with a 12-volt battery and negative
grounding. Before installing it in arecreational vehicle, truck, or
bus, check the battery voltage.
• To avoid shorts in the electrical system, be sure to disconnect the
battery (-) cable before beginning installation.
•Check whether installation and wiring have been completed cor-
rectly. Replace
the removed car components, then connect the
end of the cable to the negative (-) terminal of the battery.
•Secure the wiring with cable clamps or adhesive tape. To protect
the wiring, wrap adhesive tape around them where they lie
against metal parts.
•Route and secure all wiring so it cannot touch any moving parts,
such as the gear shift, handbrake, and seat rails. Do not route
wiring in places that get hot, such as near the heater outlet. If the
insulation of the wiring melts or gets torn, there is a danger of the
wiring short-circuiting to the vehicle body.
• Don't pass the yellow lead through a hole into the engine com-
partment to connect to the battery. This will damage the lead
insulation and cause a very dangerous short.
•Do
not shorten any leads. If you do, the protection circuit may fail
to work when it should.
• Never feed power to other equipment by cutting the insulation of
the power supply lead of the unit and tapping into the lead. The
current capacity of the lead will be exceeded, causing over heat-
mg.
•Replace fuses
only with the types stipulated on the fuse holder.
•Even
if the power is cut off because the power cord is removed or
the battery is replaced, the CD title display and ITS memory are
retained
for 24 hours.