
VSX-D307
2
1. CONTRAST OF MISCELLANEOUS PARTS
Reference Nos. indicate the pages and Nos. in the service manual for the base model.
CONTRAST TABLE
VSX-D307/SDXJI,/SDXJI/NC and VSX-D307/KUXJI are constructed the same except for the following :
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
561
473
R50
1R0
5621
NOTES:
560
47k
0.5
1
RD1/4PU J
RD1/4PU J
RN2H K
RS1P K
56 x 10
1
47 x10
3
R50
1R0
561
473
5.62k RN1/4PC F562 x 10
1
5621
.oN.feRkraMnoitpircseDdnalobmyS .oNtraP skrameR
703D-XSV IJXUK/ 703D-XSV IJXDS/ 703D-XSV CN/IJXDS/
SEILBMESSA
PSNyssAXELPMOC5247KWA7247KWA7247KWA
7-5PyssAYRAMIRP7607XWA3707XWA3707XWA
1-6PyssATNORF2607XWA5707XWA5707XWA
9-5PtinURENUTMA/MF6407XXA7407XXA7407XXA
GNIKCAP
3-3P)hsilgnE(snoitcurtsnIgnitarepO6317BRAdesutoNdesutoN
3-3PsnoitcurtsnIgnitarepOdesutoN1617ERA1617ERA
)esenihC/hsinapS/hsilgnE(
4-3PPSNdraCytnarraW1501YRAdesutoNdesutoN
11-3PesaCgnikcaP7557DHA5857DHA5167DHA
lebaLV022noituaCdesutoN3001RRA3001RRA.tesehtnotuP
NOITCESROIRETXE
01-5P)1T(remrofsnarTrewoP5027STA6027STA6027STA
11-5P)A8:2UF(esuF6801KERdesutoNdesutoN
11-5P)A4:2UF(esuFdesutoN3311KER3311KER
21-5P)A01:1UF(esuF7801KER2311KER2311KER
)A4:3UF(esuFdesutoN3311KER3311KER1.oN
31-5PdroCrewoPCA7501GDP7511GDA7511GDA
41-5PreppotSdroCC22-MCB22-MCB22-MC
71-5PlenaPraeR7267CNA1367CNA9867CNA
retceleSegatloVdesutoN705-XKA705-XKA2.oN
retceleSegatloVdesutoN4001XKA4001XKA3.oN
PSNdraCesuFdesutoN7467XAA7467XAA4.oN
PSNdraCesuFdesutoN8467XAA8467XAA5.oN
NOITCESLENAPTNORF
4-6PPSNretteG1367XAA2367XAA2367XAA
Note: ÷The numbers in the remarks column correspond to the numbers on "EXPLOEDED VIEWS".
÷For ASSEMBLIES, refer to “CONTRAST OF PCB ASSEMBLIES” and “2. SCHEMATIC DIAGRAM”.