Pioneer Super Tuner III DEH-P7400MP User manual

English Español Deutsch
Multi-CD/DAB control High power CD/MP3 player with
RDS tuner
Reproductor de CD/MP3 de alta potencia con control
de múltiples CD/DAB con sintonizador RDS
Operation Manual
DEH-P7400MP
Manual de Operación

Before You Start
About this unit 5
About this manual 5
Precautions 5
In case of trouble 5
Features 5
• CD playback 5
• MP3 file playback 5
Protecting your unit from theft 6
• Removing the front panel 6
• Attaching the front panel 6
About the demo mode 6
• Reverse mode 6
• Feature demo 6
What’s what 8
• Head Unit 8
• Optional remote control 9
Power ON/OFF
Turning the unit on 10
Selecting a source 10
Turning the unit off 10
Tuner
Listening to the radio 11
Introduction of advanced tuner
operation 12
Storing and recalling broadcast
frequencies 12
Tuning in strong signals 13
Storing the strongest broadcast
frequencies 13
RDS
Introduction of RDS operation 14
Switching the RDS display 14
Selecting alternative frequencies 15
• Using PI Seek 15
• Using Auto PI Seek for preset
stations 15
• Limiting stations to regional
programming 15
Receiving traffic announcements 16
• Responding to the TP alarm 16
Using PTY functions 17
• Searching for a RDS station by PTY
information 17
• Using news program interruption 17
• Receiving PTY alarm broadcasts 17
Using radio text 18
• Displaying radio text 18
• Storing and recalling radio text 18
PTY list 19
Built-in CD Player
Playing a CD 20
Introduction of advanced built-in CD player
operation 21
Repeating play 21
Playing tracks in a random order 21
Scanning tracks of a CD 22
Pausing CD playback 22
Using disc title functions 22
• Entering disc titles 22
• Displaying disc titles 23
Using CD TEXT functions 23
• Displaying titles on CD TEXT discs 23
• Scrolling titles in the display 23
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to oper-
ate your model properly. After you have finished reading the instructions, put them
away in a safe place for future reference.
Contents
En
2
00
Section

MP3 Player
Playing a MP3 24
Introduction of advanced built-CD player
(MP3) operation 25
Repeating play 25
Playing tracks in a random order 26
Scanning folders and tracks 26
Pausing MP3 playback 27
Displaying titles on MP3 disc 27
Scrolling titles in the display 27
Multi-CD Player
Playing a CD 28
50-disc multi-CD player 28
Introduction of advanced multi-CD player
operation 29
Repeating play 29
Playing tracks in a random order 30
Scanning CDs and tracks 30
Pausing CD playback 30
Using ITS playlists 31
• Creating a playlist with ITS
programming 31
• Playback from your ITS playlist 31
• Erasing a track from your ITS
playlist 32
• Erasing a CD from your ITS playlist 32
Using disc title functions 32
• Entering disc titles 32
• Displaying disc titles 33
• Selecting discs from the disc
title list 33
Using CD TEXT functions 34
• Displaying titles on CD TEXT discs 34
• Scrolling titles in the display 34
Using compression and bass emphasis 34
Audio Adjustments
Introduction of audio adjustments 35
Settng the sound focus equalizer 35
Using balance adjustment 36
Using the equalizer 36
• Recalling equalizer curves 36
• Adjusting equalizer curves 37
• Fine adjusting equalizer curve 37
Adjusting bass 38
Adjusting treble 38
Adjusting loudness 38
Using subwoofer output 38
• Adjusting subwoofer settings 39
Using non fading output 39
• Adjusting non fading output level 39
Using the high pass filter 40
Adjusting source levels 40
Initial Settings
Adjusting initial settings 41
Setting the time 41
Setting the FM tuning step 41
Setting the DAB Priority Function 42
• When it is on 42
• When it is off 42
Switching Auto PI Seek 42
Switching the warning tone 42
Switching the auxiliary setting 42
Switching the dimmer setting 43
Selecting the brightness 43
Selecting the illumination color 43
Setting the rear output and
subwoofer controller 43
Switching the handsfree telephoning 44
Switching the Telephone
Muting/Attenuation 44
Switching the telephone standby 44
Contents
En 3
English Español Deutsch Français Italiano Nederlands
00
Section

Other Functions
Using different entertainment displays 45
Using the AUX source 45
• Selecting AUX as the source 45
• Setting the AUX title 45
Using the telephone muting/attenuation
and handsfree telephoning function 46
• Telephone muting/attenuation
function 46
• Handsfree telephoning function 46
Introduction of DAB operation 47
• Operation 47
• Changing the Label 47
• Operating Announcements with the
Function Menu 48
• Available PTY Function 48
• Searching the PTY 48
• Using dynamic label 48
• Displaying dynamic label 48
• Storing and recalling
dynamic label 49
Additional Information
CD player and care 49
CD-R/CD-RW discs 50
Understanding built-in CD player error
messages 50
MP3 files 51
About folders and MP3 files 52
Terms 53
Specifications 54
Contents
En
4
00
Section

Before You Start
En 5
About this unit
The tuner frequencies on this unit are allocated
for use in Western Europe, Asia, the Middle
East, Africa and Oceania. Use in other areas
may result in improper reception. The RDS func-
tion operates only in areas with FM stations
broadcasting RDS signals.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and oper-
ation. All the functions have been designed for
the easiest possible use, but many are not self-
explanatory. This operation manual will help you
benefit fully from this product’s potential and to
maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin using
this unit. It is especially important that you read
and observe precautions on this page and in
other sections.
This manual explains head unit operation. You
can perform the same operations with the steer-
ing remote control (sold separately).
Precautions
•ACLASS 1 LASER PRODUCT label is affixed
to the bottom of this unit.
• The Pioneer CarStereo-Pass is for use only in
Germany.
• Keep this manual handy as a reference for
operating procedures and precautions.
• Always keep the volume low enough so you
can hear sounds outside of the car.
• Protect this product from moisture.
• If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
In case of trouble
Should this product fail to operate properly,
contact your dealer or nearest authorized
Pioneer Service Station.
Features
CD playback
Music CD/CD-R/CD-RW playback is possible.
MP3 file playback
It is possible to play back MP3 files recorded on
CD-ROM/CD-RW (ISO9660 Level 1/Level 2 stan-
dard recordings). (Refer to page 24.)
CLASS 1
LASER PRODUCT
This product complies with the EMC
Directives (89/336/EEC, 92/31/EEC) and
CE Marking Directive (93/68/EEC).
English Español Deutsch Français Italiano Nederlands
01
Section

01
Section
Before You Start
En
6
Protecting your unit from theft
The front panel can be detached from the head
unit and stored in the protective case provided
to discourage theft.
• If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound.
• You can turn off the warning tone. See
Switching the warning tone on page 42.
Important
• Never use force or grip the display and the
buttons tightly when removing or attaching.
• Avoid subjecting the front panel to excessive
shocks.
• Keep the front panel out of direct sunlight and
high temperatures.
Removing the front panel
1 Press OPEN to open the front panel.
2 Grip the left side of the front panel and pull
it gently outward.
Take care not to grip it tightly or drop it.
3 Put the front panel into the protective case
provided for safe keeping.
Attaching the front panel
Replace the front panel by holding it upright
to this unit and clipping it securely into the
mounting hooks.
About the demo mode
This product features two demonstration
modes. one is the reverse mode, the other is the
feature demo mode.
Reverse mode
If you do not perform an operation within about
30 seconds, screen indications start to reverse,
and then continue reversing every 10 seconds.
Pressing 5 numbered button when power to this
product is switched off while the ignition switch
is set to ACC or ON cancels the reverse mode.
Pressing 5 numbered button again to start the
reverse mode.
Feature demo
The feature demo automatically starts when
power to this product is switched off while the
ignition switch is set to ACC or ON. Pressing 6
numbered button during feature demo opera-
tion cancels the feature demo mode. Pressing 6
numbered button again to start the feature
mode. remember that if the feature demo con-
tinues operating when the car engine is
switched off, it may drain battery power.

01
Section
Before You Start
En 7
Notes
• You cannot cancel a demo mode when the
front panel is open.
• The red lead (ACC) of this product should be
connected to a terminal coupled with ignition
switch on/off operations. If this is not done,
the vehicle battery may be drained.
English Español Deutsch Français Italiano Nederlands

01
Section
En
8
Before You Start
What’s what
Head Unit
1TA button
Press to switch traffic announcements func-
tion on or off.
2VOLUME
When you press the VOLUME, it extends
outward so that it becomes easier to turn.
To retract the VOLUME, press it again.
Rotate to increase or decrease the volume.
3ENTERTAINMENT button
Press to change to the entertainment dis-
play.
4DISPLAY button
Press to select different displays.
5TEXT button
Press to switch radio text function on or off.
6FUNCTION button
Press to select functions.
7OPEN button
Press to open the front panel.
8AUDIO button
Press to select various sound quality con-
trols.
95/∞/2/3buttons
Press to do manual seek tuning, fast for-
ward, reverse and track search controls. Also
used for controlling functions.
0SFEQ button
Press to select a natural sound with pres-
ence.
-BAND/ESC button
Press to select among three FM or MW/LW
bands and cancel the control mode of func-
tions.
=1–6 (PRESET TUNING) buttons
Press for preset tuning and disc number
search when using a multi-CD player.
~SOURCE button
This unit is switched on by selecting a
source. Press to cycle through all of the
available sources.
SELECT
35
!~
9
8
7
0
1246
-=

01
Section
Before You Start
En 9
English Español Deutsch Français Italiano Nederlands
!EQ button
Press to select various equalizer curves.
Optional remote control
The steering remote control CD-SR80 is sold
separately. Operation is the same as when
using the button on the head unit. See the
explanation of the head unit about the operation
of each button with the exception of ATT, which
is explained below.
@ATT button
Press to quickly lower the volume level, by
about 90%. Press once more to return to the
original volume level.
#VOLUME
Press to increase or decrease the volume.
#
@
8
6
~
9
-

Power ON/OFF
Turning the unit on
Press SOURCE to turn the unit on.
When you select a source the unit is turned on.
Selecting a source
You can select a source you want to listen to. To
switch to the built-in CD player, load a disc in
this unit (refer to page 20).
Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Built-in CD player—TV—Tuner—DAB (Digital
Audio Broadcasting)—Multi-CD player—
External unit 1—External unit 2 —AUX—
Telephone Standby
Notes
• In the following cases, the sound source will
not change:
— When a product corresponding to each
source is not connected to this unit.
— When no disc is set in this unit.
— When no magazine is set in the multi-CD
player.
— When the AUX (auxiliary input) is set to off
(refer to page 42).
— When the Telephone standby is set to off
(refer to page 44).
• External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
• When this unit’s blue/white lead is connected
to the car’s auto-antenna relay control termi-
nal, the car’s antenna extends when this
unit’s source is switched on. To retract the
antenna, switch the source off.
Turning the unit off
Press SOURCE and hold for at least one sec-
ond to turn the unit off.
En
10
02
Section

Tuner
En 11
Listening to the radio
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 12.
This unit’s AF (alternative frequencies search)
function can be switched on and off. AF should
be off for normal tuning operation (refer to page
15).
1STEREO (ST) indicator
Shows that the frequency selected is being
broadcast in stereo.
2BAND indicator
Shows which band the radio is tuned to, MW,
LW or FM.
3PRESET NUMBER indicator
Shows what preset has been selected.
4FREQUENCY indicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press BAND/ESC to select a band.
Press BAND/ESC until the desired band is dis-
played, FM1, FM2, FM3 for FM or MW/LW.
4 To perform manual tuning, press 2or 3
with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold 2
or 3for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
2or 3with a quick press.
• If you press and hold 2or 3you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
Note
• When the frequency selected is being broad-
cast in stereo the STEREO (ST )indicator will
light.
123
4
English Español Deutsch Français Italiano Nederlands
03
Section

03
Section
En
12
Tuner
Introduction of advanced tuner
operation
1FUNCTION display
Shows the function status.
Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch between
the following functions:
BSM (best stations memory)—REG (regional)—
LOCAL (local seek tuning)—PTY (program type
selection)—TA (traffic announcement
standby)—AF (alternative frequencies search)—
NEWS (news program interruption)
• To return to the frequency display, press
BAND/ESC.
• If MW/LW band is selected, you can only
select BSM or LOCAL.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the frequency display.
Storing and recalling broadcast
frequencies
If you press any of the PRESET TUNING buttons
you can easily store up to six broadcast frequen-
cies for later recall with the touch of a button.
When you find a frequency that you want to
store in memory press a PRESET TUNING but-
ton and hold until the preset number stops
flashing.
The number you have pressed will flash in the
PRESET NUMBER indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same PRESET TUN-
ING button the radio station frequency is
recalled from memory.
Notes
• Up to 18 FM stations, 6 for each of the three
FM bands, and 6 MW/LW stations can be
stored in memory.
• You can also use 5and ∞to recall radio sta-
tion frequencies assigned to PRESET TUNING
buttons.
1

03
Section
Tuner
En 13
English Español Deutsch Français Italiano Nederlands
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.
1 Press FUNCTION to select LOCAL.
Press FUNCTION until Local appears in the
display.
2 Press 5to turn local seek tuning on.
Local seek sensitivity (e.g., Local 2) appears in
the display.
3 Press 2or 3to set the sensitivity.
There are four levels of sensitivity for FM and
two levels for MW/LW:
FM: Local 1—Local 2—Local 3—Local 4
MW/LW: Local 1—Local 2
The Local 4 setting allows reception of only the
strongest stations, while lower settings let you
receive progressively weaker stations.
4 When you want to return to normal seek
tuning, press ∞to turn local seek tuning off.
Local :OFF appears in the display.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automati-
cally store the six strongest broadcast frequen-
cies under PRESET TUNING buttons 1–6 and
once stored there you can tune in to those fre-
quencies with the touch of a button.
1 Press FUNCTION to select BSM.
Press FUNCTION until BSM appears in the dis-
play.
2 Press 5to turn BSM on.
BSM begins to flash. While BSM is flashing the
six strongest broadcast frequencies will be
stored under PRESET TUNING buttons in order
of their signal strength. When finished, BSM
stops flashing.
• To cancel the storage process, press ∞.
Note
• Storing broadcast frequencies with BSM may
replace broadcast frequencies you have saved
using PRESET TUNING.

04
Section
En
14
RDS
Introduction of RDS operation
RDS (radio data system) is a system for provid-
ing information along with FM broadcasts. This
inaudible information provides such features as
program service name, program type, traffic
announcement standby and automatic tuning,
intended to aid radio listeners in finding and
tuning in to a desired station.
1AF indicator
Shows when AF (alternative frequencies
search) function is on.
2TP ( ) indicator
Shows when a TP station is tuned in.
3Program service name
Shows the type of broadcast program.
• If the set NEWS is received, the icon
lights.
Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch between
the following functions:
BSM (best stations memory)—REG (regional)—
LOCAL (local seek tuning)—PTY (program type
selection)—TA (traffic announcement
standby)—AF (alternative frequencies search)—
NEWS (news program interruption)
• To return to the frequency display, press
BAND/ESC.
• If MW/LW band is selected, you can only
select BSM or LOCAL.
Notes
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the frequency display.
• RDS service may not be provided by all sta-
tions.
• RDS functions like AF and TA are only active
when your radio is tuned to a RDS station.
Switching the RDS display
When you tune in a RDS station its program
service name is displayed. If you want to know
the frequency you can.
Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Program service name (A) —PTY information
and Frequency—Program service name (B)
PTY (program type ID code) information is listed
on page 19.
• PTY information and the frequency of the
current station appears on the display for eight
seconds.
• If a PTY code of zero is received from a station,
Display is blank. This indicates that the station
has not defined its program contents.
• If the signal is too weak for this product to
pick up the PTY code, the PTY Information
Display is blank.
1
32

04
Section
RDS
En 15
English Español Deutsch Français Italiano Nederlands
Selecting alternative frequencies
If you are listening to a broadcast and the recep-
tion becomes weak or there are other problems,
the unit will automatically search for a different
station in the same network which is broadcast-
ing a stronger signal.
• AF is on as a default.
1 Press FUNCTION to select AF.
Press FUNCTION until AF appears in the dis-
play.
2 Press 5to turn AF on.
Press 5and AF :ON is displayed.
3 Press ∞to turn AF off.
Press ∞and AF :OFF is displayed.
Notes
• Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
• When you recall a preset station, the tuner
may update the preset station with a new
frequency from the station’s AF list. (This is
only available when using presets on the FM1
or FM2 band.) No preset number appears on
the display if the RDS data for the station
received differs from that for the originally
stored station.
• Sound may be temporarily interrupted by
another program during a AF frequency
search.
• When the tuner is tuned to a non-RDS station
the AF indicator flashes.
• AF can be switched on or off independently
for each FM band.
Using PI Seek
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station with
the same programming. During the search, PI
Seek is displayed and the output is muted. The
muting is discontinued after completion of the
PI seek, whether or not a different station is
found.
Using Auto PI Seek for preset stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can be
set to perform PI Seek during preset recall.
• The default setting for Auto PI Seek is off. See
Switching Auto PI Seek on page 42.
Limiting stations to regional program-
ming
When AF is used to automatically retune fre-
quencies, the regional function limits the selec-
tion to stations broadcasting regional
programs.
1 Press FUNCTION to select REG.
Press FUNCTION until Regional appears in the
display.
2 Press 5to turn the regional function on.
Press 5and Regional :ON is displayed.
3 Press ∞to turn the regional function off.
Press ∞and Regional :OFF is displayed.
Notes
• Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).

04
Section
En
16
RDS
• The preset number may disappear on the
display if the tuner tunes in a regional station
which differs from the originally set station.
•REG can be turned on or off independently for
each FM band.
Receiving traffic announcements
TA (traffic announcement standby) lets you
receive traffic announcements automatically,
no matter what source you are listening to. TA
can be activated for both a TP station (a station
that broadcasts traffic information) or an
enhanced other network’s TP station (a station
carrying information which cross-references TP
stations).
1 Tune in a TP or enhanced other network’s
TP station.
When you are tuned into a TP or enhanced other
network’s TP station the TP indicator ( )
will light.
2 Press TA to turn traffic announcement
standby on.
Press TA until TA ON appears in the display. The
tuner will standby for traffic announcements.
• To turn traffic announcements standby off,
press TA again.
3 Use VOLUME to adjust the TA volume when
a traffic announcement begins.
Rotate to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announcements.
4 Press TA while a traffic announcement is
being received to cancel the announcement.
The tuner returns to the original source but
remains in the standby mode until TA is pressed
again.
Notes
• You can also turn on or off TA in the setting
menu that appears with the pressing of
FUNCTION.
• The system switches back to the original
source following traffic announcement recep-
tion.
• Only TP and enhanced other network’s TP
stations are tuned in during seek tuning or
BSM when TA is on.
Responding to the TP alarm
When a TP or enhanced other network’s TP
station is lost due to a weak signal a series of
short beeps, about five seconds long, sound to
remind you to select another TP or enhanced
other network’s TP station.
When listening to the tuner, tune in another
TP or enhanced other network’s TP station.
• When listening to sources other than the
tuner, the unit will automatically seek out a TP
station with the strongest signal after a 10- or
30-second delay. The delay is 10 seconds if TA is
on and 30 seconds if TA and AF are on.

04
Section
RDS
En 17
English Español Deutsch Français Italiano Nederlands
Using PTY functions
You can tune in a station by using PTY informa-
tion.
Searching for a RDS station by PTY
information
You can search for general types of broadcast-
ing programs, such as those listed on page 19.
1 Press FUNCTION to select PTY.
Press FUNCTION until PTY appears in the dis-
play.
2 Press 2or 3to select a program type.
There are four program types:
News&Inf—Popular—Classics—Others
3 Press 5to begin the search.
When you press 5the program type name in
the display begins to flash. The unit searches for
a station broadcasting that program type. When
a station is found its program service name is
displayed.
• You can stop search with the ∞.
Notes
• The program of some stations may differ from
that indicated by the transmitted PTY.
• If no station is broadcasting the type of pro-
gram you searched for, Not Found is displayed
for about two seconds and then the tuner
returns to the original station.
Using news program interruption
When a news program is broadcast from a PTY
code news station the unit can switch from any
station to the news broadcast station. When the
news program ends, reception of the previous
program resumes.
Press TA and hold to turn on news program
interruption setting.
Press TA until NEWS ON appears in the display.
• To turn off news program interruption, press
TA and hold until NEWS OFF appears in the
display.
Note
• You can also turn on or off NEWS in the set-
ting menu that appears with the pressing of
FUNCTION.
Receiving PTY alarm broadcasts
PTY alarm is a special PTY code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code, Alarm appears on the display and
the volume adjusts to the TA volume. When the
station stops broadcasting the emergency
announcement, the system returns to the previ-
ous source.
• An emergency announcement can be can-
celled by pressing TA.

RDS
Using radio text
This tuner can display radio text data transmit-
ted by RDS stations, such as station informa-
tion, the name of the currently broadcast song
and the name of the artist.
Notes
• When radio text is received, TXT is displayed.
• The tuner automatically memorizes the three
latest radio text broadcasts received, replac-
ing text from the least recent reception with
new text when it is received.
Displaying radio text
You can display the currently received radio text
and the three most recent radio text.
1 Press TEXT to display radio text.
Radio text for the current broadcasting station
is displayed.
• You can cancel radio text display by pressing
TEXT or BAND/ESC.
• When no radio text is received, NO TEXT is
displayed.
2 Press 2or 3to recall the three most
recent radio texts.
Pressing 2or 3switches between the current
and the three most recent radio text data displays.
• If there is no radio text data in memory, the
display will not change.
3 Press 5or ∞to scroll.
Press 5to go to the beginning. Press ∞to scroll
the radio text data one character at a time.
Notes
• Display of radio text is cancelled after text
data has scrolled three times through the
display.
• If you do not perform an operation within
eight seconds, the radio text mode is can-
celled.
Storing and recalling radio text
You can store data from up to six radio text
transmissions at buttons 1–6.
1 Display the radio text you want to store in
memory.
Refer to Displaying radio text on this page.
2 Press any of 1–6 and hold to store the
selected radio text.
The memory number will display and the
selected radio text has been stored in memory.
The next time you press the same 1–6 button in
the radio text display the stored text is recalled
from memory.
En
18
04
Section

RDS
En 19
PTY list
General Specific Type of program
News & Inf News News
Affairs Current affairs
Info General information and advice
Sport Sports
Weather Weather reports/meteorological information
Finance Stock market reports, commerce, trading, etc.
Popular Pop Mus Popular music
Rock Mus Contemporary modern music
Easy Mus Easy listening music
Oth Mus Non categorized music
Jazz Jazz
Country Country music
Nat Mus National music
Oldies Oldies music, golden oldies
Folk mus Folk music
Classics L. Class Light classical music
Classic Serious classical music
Others Educate Educational programs
Drama All radio plays and serials
Culture National or regional culture
Science Nature, science and technology
Varied Light entertainment
Children Children’s
Social Social affairs
Religion Religion affairs or services
Phone In Phone in
Touring Travel programs, not for announcements about traffic prob-
lems
Leisure Hobbies and recreational activities
Document Documentaries
English Español Deutsch Français Italiano Nederlands
04
Section

Built-in CD Player
Playing a CD
These are the basic steps necessary to play a
CD with your built-in CD player. More advanced
CD operation is explained starting on page 21.
1TRACK NUMBER indicator
Shows the track currently playing.
2PLAY TIME indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press OPEN to open the front panel.
CD loading slot appears.
• After inserting a CD, press SOURCE to select
the built-in CD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
EJECT button
• You can eject a CD by pressing EJECT.
• To avoid a malfunction, make sure that no
metal object comes into contact with the front
panel is open.
3 After a CD has been inserted, close the
front panel.
4 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5 To perform fast forward or reverse, press
and hold 2or 3.
6 To skip back or forward to another track,
press 2or 3.
Pressing 3skips to the start of the next track.
Pressing 2once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
• Do not insert anything other than a CD into
the CD loading slot.
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting the disc
again.
•5and ∞are used at the time of MP3 play-
back.
• If the built-in CD player does not operate prop-
erly, an error message such as ERROR-11 may
be displayed. Refer to Understanding built-in
CD player error messages on page 50.
1
2
En
20
05
Section