Pioneer DEH-P5100R User manual

Multi-CD/MD/DAB control High power CD player
with RDS tuner
Manual
DEH-P5100R
DEH-P5100R-B
DEH-P5100R-W


&RQWHQWV
Installation .............................................4
Installation with the Rubber Bush ...................... 4
Removing the Unit .............................................. 5
Connecting the Units ............................6
Connection Diagram .............................8
Connection in a car not featuring an
ISO Connector ................................................. 8
Key Finder ...........................................10
•HeadUnit
• Steering Remote Controller (CD-SR77)
Before Using This Product ................. 11
About This Product ........................................... 11
About This Manual ........................................... 11
Precaution ......................................................... 12
In Case of Trouble ............................................ 12
When using the 50-Disc Type
Multi-CD Player ............................................ 12
Basic Operation ..................................13
To Listen to Music ............................................ 13
Basic Operation of Tuner ................................. 15
• Manual and Seek Tuning
• Preset Tuning
•Band
Basic Operation of Built-in CD Player ............. 16
• Switching the Display
•Open
• Track Search and Fast Forward/Reverse
• Disc Loading Slot
• Eject
Basic Operation of Multi-CD Player ................ 18
• Track Search and Fast Forward/Reverse
• Disc Search
• Disc Number Search
(for 6-Disc, 12-Disc types)
Corresponding Display Indications and
Buttons ........................................................... 19
Entering the Function Menu ............................. 20
Function Menu Functions ................................. 21
Entering the Detailed Setting Menu ................. 23
Detailed Setting Menu Functions ..................... 24
Tuner Operation .................................. 25
• Local Seek Tuning (LOCAL)
• Best Stations Memory (BSM)
Using RDS Functions ......................... 26
What is RDS? ................................................... 26
Program Service Name Display ....................... 26
AF Function (AF) ............................................. 27
• Activating/Deactivating the AF Function
PI Seek Function .............................................. 28
• PI Seek
• Auto PI Seek (for preset station)
Regional Function (REG) ................................ 28
• Activating/Deactivating the REG Function
TA Function (TA) ............................................ 29
• Activating/Deactivating the TA Function
• Canceling Traffic Announcements
• Adjusting the TA Volume
• TP Alarm Function
PTY Function ................................................... 31
• Searching the PTY
• News Program Interruption Setting (NEWS)
• PTY Alarm
• Canceling Announcements
• PTY List
Using the Built-in CD Player .............. 34
• Repeat Play (REPEAT)
• Random Play (RANDOM)
• Scan Play (T-SCAN)
• Pause (PAUSE)
• Disc Title Input (TITLE IN)


Using Multi-CD Players .......................36
• Repeat Play (REPEAT)
• Random Play (RANDOM)
• Scan Play (SCAN)
• Pause (PAUSE)
ITS (Instant Track Selection) ........................... 38
• ITS Programming (ITS)
• ITS Play (ITS-P)
• Erase a Track Program
• Erase a Disc Program
Disc Title .......................................................... 40
• Disc Title Input (TITLE IN)
• Selecting Discs by Disc Title List
(TITLE LIST)
• Displaying Disc Title
Compression and DBE (COMP) ...................... 42
• COMP/DBE ON/OFF Switching
CD TEXT Function
(for CD TEXT compatible type) ................... 43
• Title Display Switching
• Title Scroll
Audio Adjustment ...............................44
Selecting the Equalizer Curve .......................... 44
Entering the Audio Menu ................................. 44
Audio Menu Functions ..................................... 45
• Balance Adjustment (FADER)
• Equalizer Curve Adjustment
(EQ-LOW/MID/HIGH)
• Equalizer Curve Fine Adjustment
• Loudness Adjustment (LOUD)
• Subwoofer Output (SUB.W)
• Subwoofer Setting Adjustment (80HZ 0)
• Non Fading Output (NON FAD)
• Non Fading Output Level Adjustment
(NON FAD)
• High Pass Filter (HPF)
• Front Image Enhancer Function (FIE)
• Source Level Adjustment (SLA)
Detaching and Replacing the
Front Panel .......................................53
Theft Protection ............................................... 53
• Detaching the Front Panel
• Replacing the Front Panel
• Warning Tone
Initial Setting .......................................54
Entering the Initial Setting Menu ..................... 54
Initial Setting Menu Functions ......................... 55
• Changing the FM Tuning Step (FM STEP)
• Setting the DAB Priority Function (DAB)
• Switching the Auto PI Seek (A-PI)
• Setting the Warning Tone (WARN)
• Switching the AUX Mode (AUX)
• Setting the Dimmer (DIMMER)
• Selecting the Illumination Color (ILL.CLR)
• Setting the Rear Speaker Lead and
Subwoofer Controller (REAR SP)
Other Functions ..................................59
Using the PGM Button (PGM-FUNC) ............ 59
• Setting the PGM Button
• Using the PGM Button
Using the AUX Source .................................... 61
• Selecting the AUX Source
• AUX Title Input
Cellular Telephone Muting .............................. 61
When using the DAB (Digital Audio
Broadcasting) Tuner ...................................... 62
• About This Product’s Indications
• Operation
CD Player and Care .............................64
Precaution ........................................................ 64
Built-in CD Player's Error Message ................. 64
Specifications ......................................65


1RWH
• Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up
properly, and the unit and the system work properly.
• Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts
can cause malfunctions.
• Consult with your nearest dealer if installation requires the drilling of holes or other modifications of
the vehicle.
• Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
• The semiconductor laser will be damaged if it overheats, so don’t install the unit anywhere hot — for
instance, near a heater outlet.
• If installation angle exceeds 60° from horizontal, the unit might not give its optimum performance.
Installation with the Rubber Bush
Holder
After inserting the holder into the dashboard, then select the
appropriate tabs according to the thickness of the dashboard
material and bend them. (Install as firmly possible using the
top and bottom tabs. To secure, bend the tabs 90 degrees.)
Screw
Rubber bush
Dashboard
,QVWDOODWLRQ


Removing the Unit
Pull out to remove the frame.
(When reattaching the frame, point the side
with a groove downwards and attach it.)
Frame
Insert the supplied extraction keys into the unit,
as shown in the figure, until they click into
place. Keeping the keys pressed against the
sides of the unit, pull the unit out.


&RQQHFWLQJWKH8QLWV
1RWH
• This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a
recreational vehicle, truck, or bus, check the battery voltage.
• To avoid shorts in the electrical system, be sure to disconnect the
 battery cable before beginning
installation.
• Refer to the owner’s manual for details on connecting the power amp and other units, then make
connections correctly.
• Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape
around them where they lie against metal parts.
• Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake and
seat rails. Do not route wiring in places that get hot, such as near the heater outlet. If the insulation of
the wiring melts or gets torn, there is a danger of the wiring short-circuiting to the vehicle body.
• Don’t pass the yellow lead through a hole into the engine compartment to connect to the battery. This
will damage the lead insulation and cause a very dangerous short.
• Do not shorten any leads. If you do, the protection circuit may fail to work when it should.
• Never feed power to other equipment by cutting the insulation of the power supply lead of the unit
and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating.
• When replacing fuse, be sure to use only fuse of the rating prescribed on the fuse holder.
• Since a unique BPTL circuit is employed, never wire so the speaker leads are directly grounded or
the left and right
 speaker leads are common.
• Speakers connected to this unit must be high-power types with minimum rating of 45 W and
impedance of 4 to 8 ohms. Connecting speakers with output and/or impedance values other than those
noted here may result in the speakers catching fire, emitting smoke or becoming damaged.
• When this product’s source is switched ON, a control signal is output through the blue/white lead.
Connect to an external power amp’s system remote control or the car’s Auto-antenna relay control
terminal (max. 300 mA 12 V DC). If the car features a glass antenna, connect to the antenna booster
power supply terminal.


• When an external power amp is being used with this system, be sure not to connect the blue/white
lead to the amp’s power terminal. Likewise, do not connect the blue/white lead to the power terminal
of the auto-antenna. Such connection could cause excessive current drain and malfunction.
• To avoid short-circuiting, cover the disconnected lead with insulating tape. Especially, insulate the
unused speaker leads without fail. There is a possibility of short-circuiting if the leads are not
insulated.
• To prevent incorrect connection, the input side of the IP-BUS connector is blue, and the output side
is black. Connect the connectors of the same colors correctly.
• If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition
switch, the red lead of the unit should be connected to a terminal coupled with ignition switch ON/
OFF operations. If this is not done, the vehicle battery may be drained when you are away from the
vehicle for several hours.
• The black lead is ground. Please ground this lead separately from the ground of high-current products
such as power amps.
If you ground the products together and the ground becomes detached, there is a risk of damage to the
products or fire.
ACC position No ACC position
• Cords for this product and those for other products may be different colors even if they have
the same function. When connecting this product to another product, refer to the supplied
Installation manuals of both products and connect cords that have the same function.


&RQQHFWLRQ'LDJUDP
Connection in a car not featuring an ISO Connector
Connect using the power cord supplied with this unit.
Multi-CD player
(sold separately)
IP-BUS cable
Connectleadsof thesamecolor
to each other.
Cap (9*)
Whennotusingthisterminal,
do not remove the cap.
Yellow (11*)
Back-up
(or accessory)
Yellow (10*)
To terminal always supplied with
power regardless of ignition
switch position.
Red (13*)
Accessory
(or back-up)
Red (12*)
To electric terminal controlled by
ignition switch (12 V DC)
ON/OFF.
Black (ground)
To vehicle (metal) body.
Orange
To lighting switch terminal.
Fuse holder
ISO connector
1RWH
In some vehicles, the ISO
connector may be divided
into two. if this is the case,
be sure to connect to both
connectors.
Yellow/black
If you use a cellular
telephone, connect it via
the Audio Mute lead on
the cellular telephone. If
not, keep the Audio
Mute lead free of any
connections.
1RWH
Depending on the kind of vehicle, the
function of 11* and 13* may be
different. In this case, be sure to connect
10* to 13* and 12* to 11*.
This Product
IP-Bus input (Blue)
Subwoofer Output or
Non Fading Output
Speaker leads
White : Front left

White/black : Front left

Gray : Front right

Gray/black : Front right

Green : Rear left

or Not Used
Green/black : Rear left

or Not Used
Violet : Rear right

or Subwoofer

Violet/black : Rear right

or Subwoofer

This product conforms to new cord colors.
Antenna jack


B
A
C
1RWH
When a subwoofer is connected to
this unit instead of a rear right
speaker, do not connect the rear left
speaker lead to anything. For
details, refer to the Initial Setting in
the Operation Manual.
Perform these connections when using a
different amp (sold separately).
Blue/white
To system control terminal of
the power amp.
(Max. 300 mA 12 V DC).
Power amp
(sold separately)
Blue/white
To Auto-antenna relay control terminal
(Max. 300 mA 12 V DC).
Blue/white
The pin position of the ISO
connector will differ depends on the
type of vehicle. Connect 23 and 24
when Pin 5 is an antenna control
type. In another type of vehicle,
never connect 23 and 24.
Connecting cords
with RCA pin plugs
(sold separately)
System remote control
Subwoofer Subwoofer


.H\)LQGHU
Head Unit
Steering Remote Controller (CD-SR77)
The steering remote controller (CD-SR77) enabling remote control of the head unit is sold
separately. Operation is the same as when using buttons on the head unit.
SOURCE/OFF button
VOLUME
PTY button
 buttons
Buttons 1–6 AUDIO button
FUNCTION button
EQ selector
DISPLAY button
TA button
OPEN button
PGM button
BAND button
SOURCE/OFF button
 buttons
AUDIO button
FUNCTION
button
BAND button
+/– button
Raise or
lower the
volume.
ATT button
This lets you quickly lower
volume level (by about 90%).
Press once more to return to the
original volume level.
 buttons


%HIRUH8VLQJ7KLV3URGXFW
About This Product
The tuner frequencies on this product are allocated for use in WesternEurope, Asia, the Middle
East, Africa and Oceania. Use in other areas may result in improper reception. The RDS
function operates only in areas with FM stations broadcasting RDS signals.
About This Manual
This product features a number of sophisticated functions ensuring superior reception and
operation. All are designed for the easiest possible use, but many are not self-explanatory. This
operation manual is intended to help you benefit fully from their potential and to maximize
your listening enjoyment.
We recommend that you familiarize yourself with the functions and their operation by reading
through the manual before you begin using this product. It is especially important that you read
and observe the “Precaution” on next page and in other sections.
This manual explains head unit operation. You can perform the same operations with the
steering remote controller (CD-SR77). The steering remote controller offers the convenience
of ATT, a function not provided on the head unit.
• This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking
Directive (93/68/EEC).


%HIRUH8VLQJ7KLV3URGXFW
Precaution
•A “CLASS 1 LASER PRODUCT” label is affixed to the bottom of the player.
•The Pioneer CarStereo-Pass is for use only in Germany.
•Keep this manual handy as a reference for operating procedures and precautions.
•Always keep the volume low enough for outside sounds to be audible.
•Protect the product from moisture.
•If the battery is disconnected, the preset memory will be erased and must be reprogrammed.
In Case of Trouble
Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer
Service Station.
When using the 50-Disc Type Multi-CD Player
The available functions of the 50-Disc Type Multi-CD Player are described in this Operation
Manual. Note that other 50-Disc Type Multi-CD Player functions cannot be used with this
product.


To Listen to Music
The following explains the initial operations required before you can listen to music.
1RWH
• Loading a disc in this product. (Refer to page 16.)
 6HOHFWWKHGHVLUHGVRXUFHHJ7XQHU
Each press of the SOURCE/OFF button selects the desired source in the following order:
Built-in CD player 3TV 3Tuner 3DAB (Digital Audio Broadcasting) 3Multi-MD player
3Multi-CD player 3External Unit 3AUX
1RWH
• External Unit refers to a Pioneer product (such as one available in the future) that, although
incompatible as a source, enables control of basic functions by this product. Only one External Unit
can be controlled by this product.
• In the following cases, the sound source will not change:
* When a product corresponding to each source is not connected to this product.
* When no disc is set in this product.
* When no magazine is set in the Multi-CD player.
* No disc is set in the Multi-MD player.
* When the AUX (external input) is set to OFF. (Refer to page 56.)
• When this product’s blue/white lead is connected to the car’s Auto-antenna relay control terminal, the
car’s Auto-antenna extends when this product’s source is switched ON. To retract the antenna, switch
the source OFF.
 ([WHQGWKH92/80(IRUZDUG
When you press the VOLUME, it extends forward so that it becomes easier to roll.
To retract the VOLUME, press it again.
Each press changes the Source ...
%DVLF2SHUDWLRQ


 5DLVHRUORZHUWKHYROXPH
Rolling the VOLUME changes the volume level.
1RWH
• Roll clockwise to raise the volume level.
• Roll counterclockwise to lower the volume level.
 7XUQWKHVRXUFH2))
Hold for 1 second
%DVLF2SHUDWLRQ


Basic Operation of Tuner
This product’s AF function can be switched ON and OFF. AF should be switched OFF for
normal tuning operations. (Refer to page 27.)
Preset Number Indicator
Band Indicator Frequency Indicator
Manual and Seek Tuning
<RXFDQVHOHFWWKHWXQLQJPHWKRGE\FKDQJLQJWKHOHQJWKRIWLPH
\RXSUHVVWKH
 EXWWRQ
1RWH
• If you continue pressing the button for longer than 0.5 seconds, you can skip
broadcast stations. Seek Tuning starts as soon as you release the button.
• Stereo indicator “
 ” lights when a stereo station is selected.
Manual Tuning (step by step) 0.5 seconds or less
Seek Tuning 0.5 seconds or more
Preset Tuning
<RXFDQPHPRUL]HEURDGFDVWVWDWLRQVLQEXWWRQV
WKURXJKIRUHDV\RQHWRXFKVWDWLRQUHFDOO
1RWH
• Up to 18 FMstations(6 in F1 (FM1), F2 (FM2) and F3 (FM3))
and 6 MW/LW stations can be stored in memory.
• You can also use the
 or  buttons to recall broadcast
stations memorized in buttons 1 through 6.
Preset station recall 2 seconds or less
Broadcast station preset memory 2 seconds or more
Band
F1 (FM1) 3 F2 (FM2)
3 F3 (FM3) 3 MW/LW


%DVLF2SHUDWLRQ
Basic Operation of Built-in CD Player
Play Time Indicator
Switching the Display
Each press of the DISPLAY button changes the
display in the following order:
Playback mode (Elapsed play time) 3Disc Title
1RWH
• If you switch displays when disc titles have not
been input, “NO TITLE” is displayed.
Open
1RWH
• Use to open the front panel when
loading or ejecting a CD.
(The illustration on the right shows
the front panel open.)
Track Search and Fast Forward/Reverse
<RXFDQVHOHFWEHWZHHQ7UDFN6HDUFKRU)DVWIRUZDUG5HYHUVHE\SUHVVLQJ
WKH
 EXWWRQIRUDGLIIHUHQWOHQJWKRIWLPH
1RWH
• If a disc cannot be inserted fully or playback fails, make sure the recorded side is down. Press the
EJECT button and check the disc for damage before reinserting it.
• If a CD is inserted with the recorded side up, it will be ejected automatically after a few moments.
• If the Built-in CD player cannot operate properly, an error message (such as “ERROR-14”)
appears on the display. Refer to “Built-in CD Player’s Error Message” on page 64.
• The Built-in CD player is not equipped with CD TEXT function.
• A CD TEXT disc is a CD featuring recorded text information such as Disc Title, Artist Name and
Track Title.
Track Search 0.5 seconds or less
Fast forward/Reverse Continue pressing
Track Number Indicator


Disc Loading Slot
The Built-in CD player plays one standard 12 cm or
8 cm (single) CD at a time. Do not use an adapter
when playing 8 cm CD.
Eject
1RWH
• The CD function can be turned ON/OFF with the
disc remaining in this product. (Refer to page 13.)
• Discs left partially inserted after ejection may incur
damage or fall out.


%DVLF2SHUDWLRQ
Basic Operation of Multi-CD Player
This product can control a Multi-CD player (sold separately).
Disc Number Indicator
Track Number Indicator
Play Time Indicator
Disc Search
Track Search and Fast Forward/Reverse
<RXFDQVHOHFWEHWZHHQ7UDFN6HDUFKRU)DVW
IRUZDUG5HYHUVHE\SUHVVLQJWKH
 EXWWRQ
IRUDGLIIHUHQWOHQJWKRIWLPH
Track Search 0.5 seconds or less
Fast forward/Reverse Continue pressing
Disc Number Search (for 6-Disc, 12-Disc types)
<RXFDQVHOHFWGLVFVGLUHFWO\ZLWKWKHWREXWWRQV-XVWSUHVVWKHQXPEHU
FRUUHVSRQGLQJWRWKHGLVF\RXZDQWWROLVWHQWR
1RWH
• When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the 1
to 6 buttons for 2 seconds or longer.
1RWH
• The Multi-CD player may perform a preparatory operation, such as verifying the presence of a
disc or reading disc information, when the power is turned ON or a new disc is selected for
playback. “READY” is displayed.
• If the Multi-CD player cannot operate properly, an error message such as “ERROR-14” is
displayed. Refer to the Multi-CD player owner's manual.
• If there are no discs in the Multi-CD player magazine, “NO DISC” is displayed.


Corresponding Display Indications and Buttons
This product’s display features Key Guidance Indicators. These light to indicate which of the
 , FUNCTION and AUDIO buttons you can use. When you’re in the Function Menu
(refer to next section), Detailed Setting Menu (refer to page 23), Initial Setting Menu (refer to
page 54) or Audio Menu (refer to page 44), they also make it easy to see which

buttons you can use to switch functions ON/OFF, switch repeat selections and perform other
operations.
Indicator and corresponding buttons are shown below.
 Head Unit  Remote Controller  Display
When ¥is lit in the display, perform appropriate operations with the ¯buttons.
When ¦is lit in the display, it indicates that you are in the Function Menu, Detailed Setting
Menu or Initial Setting Menu. You can switch between each of these menus and between
different modes in the menus using button °on the head unit or remote controller.
When §is lit in the display, it indicates you are in the Audio Menu. You can switch between
modes in the Audio Menu using button ±on the head unit or remote steering controller.
°
°
¯
¯
±
±¥
¦§


%DVLF2SHUDWLRQ
Entering the Function Menu
The Function Menu lets you operate simple functions for each source.
1RWH
• After entering the Function Menu, if you do not perform an operation within about 30 seconds, the
Function Menu is automatically canceled.
 6HOHFWWKHGHVLUHGPRGHLQWKH)XQFWLRQ0HQX5HIHUWRQH[WVHFWLRQ³)XQFWLRQ
0HQX)XQFWLRQV´
 2SHUDWHDPRGHHJ5HSHDW3OD\
 &DQFHOWKH)XQFWLRQ0HQX
Each press changes the Mode ...
The button used and the operation it performs are
indicated by the key guidance indicator. Press the
 button to switch the key guidance indicator ON,
and the
 button to switch it OFF.