Pioneer TRAKTOR PRO 2 DDJ-T1 User manual

DDJ-T1
DJ CONTROLLER
“TRAKTOR PRO 2”
Settings File Import Guide

2
Introduction
Pioneer provides a settings le exclusively for the Native Instrument's “TRAKTOR PRO 2”DJ software.
By using this le, the “TRAKTOR PRO 2”sample decks can be controlled with this unit.
• Decks C and D are assigned as the sample decks.
• The settings le does not cover all functions. The user must make other settings as necessary.
• For instructions on using the sample decks and making other settings, see the TRAKTOR 2 operation
manual (“Traktor 2 Application Reference English.pdf”).
• You must upgrade to “TRAKTOR PRO 2”(for a fee) before using the settings le.
• Those who do not plan to use the sample decks do not need to import this le.

3
Importing the Settings File
1 Download the Settings le from the Pioneer website:
http://pioneer.jp/support/download/dj/ddj-t1/
Since the download file is in the ZIP compressed format, extract the file before proceeding.
The file may automatically expand depending on your browser, in which case there will be no need for
you to expand it yourself.
• Windows users
Right click the download file and select [Extract All].
After the expansion wizard is displayed, specify the destination folder for the extracted files.
• Macintosh users
Double click the downloaded ZIP file to expand.
After the zip file is extracted, the file “PIONEER_DDJ-T1_V100.tsi” will be extracted.
2 At step 1, save the downloaded “PIONEER_DDJ-T1_V100.tsi” le in the desired location.
Example: Windows > My Documents¥Native Instruments¥Traktor 2.x.x¥Settings
Macintosh > ~/Documents/Native Instruments/Traktor 2.x.x/Settings
3 Open the Preferences window, then click the [Import] button.
Select the “PIONEER_DDJ-T1_V100.tsi” file saved in step 2.
* If there is already a different settings file, the new settings file may not operate properly.
Delete any other settings file before performing this procedure.
For instructions on deleting the settings file, see “Deleting Settings Files” on page 5.

4
4 Click the [OK] button.
The HID and MIDI mappings are loaded, and the GUI layout for this settings file is set simultaneously.
Use this settings file with sample decks C and D.
5 Open Controller Manager.
1 At [Device], select [Pro 2 Sample Deck 1 - Pioneer.DDJ-T1], and at [In-Port], select the device
corresponding to the DDJ-T1.
2 At [Device], select [Pro 2 Sample Deck 2 - Generic MIDI], and at [In-Port] and [Out-Port], select the
audio device corresponding to the DDJ-T1.

5
Deleting Settings Files
1 Open Controller Manager.
At [Device], select the setting to be deleted, then select [Delete] from [Edit...].

6
To Use Decks C and D as Track Decks
1 Using the procedure under “Deleting Settings Files” on page 5, delete the “Pro 2 Sample
Deck 1- Pioneer.DDJ-T1 (XXX_XXXXXXXX, XXX_XXXXXXXX)”and “Pro 2 Sample Deck 2-
Generic MIDI (XXXXXX (XXXXXX),XXXXXX (XXXXXX))” sample deck control mappings.
2 Disconnect the DDJ-T1 from the PC/Mac, then reconnect it.
* Problems may arise with TRAKTOR PRO 2 control if the DDJ-T1 is reconnected while TRAKTOR PRO 2
is running.
It is recommended that you reconnect the DDJ-T1 using the following procedure:
1
Quit TRAKTOR PRO 2.
2
Disconnect the DDJ-T1 from the PC/Mac, then reconnect it.
3
Relaunch TRAKTOR PRO 2.
3 Click the letter for the deck whose assignment you want to change, then select [Track Deck].

7
Operating “TRAKTOR PRO 2”Using This
Unit's Buttons
The default settings are as follows:
CUE
PLAY/PAUSE
CUE
ONOFF
ADVANCED
ACTIVE
CHAINED
MINMAX
DRY/ WET
DECK
FILTER
A
C
FX1
FUNCTION
IN ADJUST OUT ADJUST
MOVE
IN
AUTO LOOPKEY
LOCK
TEMPO
RANGE
OUT
NEEDLE SEARCH
MODE SIZE BWD FWD
DELETE 1
REV
PHONES
FWD
TEMPO
0
SELECT/ BACK
1
1
2
2
3
3
MINMAX MINMAX MIN
LOWHI
MIN
VO
L
MAI
BROWSE
HEADPH
MCUE
MIX
MIN
VOL
MAX
5
2
6
3
7
4
8
MOVE GRID
SHIFT
GAIN
MINMAX
C
LOAD
C
FX
12
SYNCMASTER
EQ
HI
MINMAX
MID
MINMAX
LOW
MINMAX
OFF ON
GAIN
MINMAX
TREE
A
LOAD
A
FX
12
SYNC
10
9
8
7
6
5
4
3
2
1
0
MASTER
EQ
HI
MINMAX
MID
MINMAX
LOW
MINMAX
OFF ON
CH FADER
HOT CUE
CUE CUE
2
3
1
4
5
6
a
9
7
8
c
b
When Decks C and D are selected
DDJ-T1 button TRAKTOR PRO 2 function
4-slot simultaneous
operation
1OUT (OUT ADJUST) button Slot Size x2
2IN (IN ADJUST) button Slot Size /2
3ACTIVE button Slot Size Reset
4AUTO LOOP (MOVE GRID) control (turn) Slot Volume
5AUTO LOOP (MOVE GRID) control (press) Slot Volume (Maximum)
SHIFT+4AUTO LOOP (MOVE GRID) control (turn) Slot Filter
SHIFT+5AUTO LOOP (MOVE GRID) control (press) Slot Filter On/Off
6Jog dial
Slot Scratch On
Slot Scratch
Slot Tempo Bend
7SYNC button Slot Phase Sync
8When [FUNCTION] is ON
NEEDLE SERACH pad Group Play*
9PLAY/PAUSE button Group Play
aCUE button Group Trigger
Single slot
operation
bWhen [FUNCTION] is ON
NEEDLE SERACH pad Sample Play*
c
MOVE PANEL/HOT CUE PANEL
[1]/[5] button
[2]/[6] button
[3]/[7] button
[4]/[8] button
See “About HOT CUE Assignment”below.
* Even when decks A and B are selected, when the [FUNCTION] button is turned on, the sample decks can be operated using the [NEEDLE
SEARCH] pad.
About HOT CUE Assignment
Not Load Slot Load
HOT CUE Load from Deck Sample Play
SHIFT + HOT CUE Load from List Sample Trigger
MOVE/DELETE + HOT CUE Delete Slot
•For the various sampler functions, see the TRAKTOR 2 English manual (“Traktor 2 Application Reference
English.pdf”).

PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
PIONEER ELECTRONICS (USA) INC.
P. O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: [phone]
PIONEER ELECTRONICS OF CANADA, INC.
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: [phone]
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: [phone]
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: [phone]
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: [phone]
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: [phone]
© 2011 PIONEER CORPORATION.
All rights reserved.
•TRAKTOR is the registered trademark of Native Instruments GmbH.
• Windows®, Windows 7, Windows Vista®and Windows XP are the registered trademarks and trademarks of
Microsoft Corporation registered in the United States of America and other countries.
• Mac OS is the trademark of Apple Inc. registered in the United States of America and other countries.
<DRI1026-A>