Pioneer TRAKTOR 2 DJM-T1 User manual

DJM-T1
DJ MIXER
“TRAKTOR 2”
Settings File Import Guide

2
Introduction
Pioneer provides a settings le exclusively for the Native Instrument's “TRAKTOR 2”DJ software.
Using this le lets you set a key mapping for taking maximum advantage of the DJM-T1's function.
• The settings le does not cover all functions. The customer must make other settings as necessary.

3
Backing up an existing settings file
When a new settings le is imported, the previous settings are cleared.
We recommend using the procedure below to backup existing settings so that they can be restored if
necessary.
(This operation is not necessary for those using the TRAKTOR 2 software for the rst time.)
1 Open the Preferences window, then click the [Export] button.
2 With the items to be backed up checked, click the [OK] button.
Save the file in the desired location with an easily understandable name (ex.: BackUp.tsi).

4
Importing the Settings File
1 Access the Pioneer website (http://www/prodjnet.com/support/), move from the Support
top page to the Download page, and then download the settings le from DJM-T1 page.
Since the download file is in the ZIP compressed format, extract the file before proceeding.
The file may automatically expand depending on your browser, in which case there will be no need for
you to expand it yourself.
• Windows users
Right click the download file and select [Extract All].
After the expansion wizard is displayed, specify the destination folder for the extracted files.
• Mac OS users
Double click the downloaded ZIP file to expand.
After the zip file is extracted, the file “PIONEER_DJM-T1_Vxxx.tsi” will be extracted.
2 Save the “PIONEER_DJM-T1_Vxxx.tsi” le downloaded in step 1 in the desired location.
Example: Windows > My Documents¥Native Instruments¥Traktor 2.x.x¥Settings
Mac OS > ~/Documents/Native Instruments/Traktor 2.x.x/Settings
3 Connect DJM-T1 to a computer by a USB cable and then turn on the power of DJM-T1.
4 Start TRAKTOR 2.
5 Open the Preferences window, then click the [Import] button.
Select the “PIONEER_DJM-T1_Vxxx.tsi” file saved in step 2.

5
6 Click the [OK] button.
Check that [Controller Mappings] is checked.
7 Open Controller Manager.
1 At [Device], select [Pioneer.DJM-T1], and at [In-Port], select the device corresponding to the DJM-T1.
2 At [Device], select [Pioneer.DJM-T1 - Generic MIDI], and at [In-Port] and [Out-Port], select the audio
device corresponding to the DJM-T1.

6
Deleting the settings
If you want to delete the settings, do so using the procedure below.
1 Open Controller Manager.
At [Device], select the setting to be deleted, then select [Delete] from [Edit...].

7
Using a settings sample for ADVANCED
SHIFT functions
When the rmware of DJM-T1 is updated to ver. 2.00 or newer
(*1), and TRAKTOR 2 settings le is
imported, ADVANCED SHIFT function is added and the group of MIDI codes are expanded.
ADVANCED SHIFT enables DJM-T1, by using the expanded MIDI, to assign functions of TRAKTOR 2 and
other applications and to control many more functions of those applications.
TRAKTOR 2 settings le includes a settings sample where functions of TRAKTOR 2 are assigned using
the expanded MIDI code.
The functions of [Button/Knob] are described in the "APPENDIX - Function list of settings sample of
DJM-T1 ADVANCED SHIFT".
[Button/Knob]: The name of buttons and knobs of DJM-T1.
[Function]: Traktor 2 functions controlled by buttons and/or knobs when ADVANCED
SHIFT is ON.
Follow the procedures below to call out the functions assigned using ADVANCED SHIFT.
1 Press the [SHIFT] button twice consecutively and you will see the [SHIFT] button light.
2 Press and hold [SHIFT] button. You will see the [SHIFT] button flashing, and now you are in ADVANCED
SHIFT mode.
While the [SHIFT] button is held, you stay in ADVANCED SHIFT mode.
3 Press and/or turn [Button/Knob] to use the assigned functions.
*1 If you use Windows 7 on your PC to connect DJM-T1 to, it is required to be updated to Service Pack 1.

8
Changing a settings sample of
ADVANCED SHIFT
Assignments set by the settings le of ADVANCED SHIFT may be changed to meet your operating
environment.
Before changing any specic function assigned to [Button/Knob], delete the function assigned to the
[Button/Knob] in the settings sample.
The functions of [Button/Knob] are described in the "APPENDIX - Function list of settings sample of
DJM-T1 ADVANCED SHIFT".
[Button/Knob]: The name of buttons and knobs of DJM-T1.
[Function]: Traktor 2 functions controlled by buttons and/or knobs when ADVANCED
SHIFT is ON.
[MIDI]: MIDI code output when Button/Knob is pressed/turned.
[TRAKTOR2 Control]: "Control" dened in the assignment table of TRAKTOR 2 Controller Manager.
Follow the procedures below to change the settings sample assigned using ADVANCED SHIFT.
1 View the information in the settings sample.
Look for the information of [MIDI] and [TRAKTOR2 Control] associated with the [Button/Knob]-[Function]
you want to change in the "APPENDIX - Function list of the settings sample of DJM-T1 ADVANCED SHIFT."'
In some cases, multiple functions listed in [TRAKTOR2 Control] may be assigned to a single
[Button/Knob]-[Function].
2 Connect DJM-T1 to the computer by the USB cable and turn on the power of DJM-T1.
3 Start Traktor 2.

9
4 Open the Controller Manager
Select [Pioneer.DJM-T1 - Generic MIDI] from [Device Setup].
5 Select the settings in the "Assignment Table"
From the [Assignment Table], select the settings for [MIDI] and [TRAKTOR2 Control] assigned to the
[Button/Knob]-[Function] you want to change.

10
6 Delete the settings dened in the Assignment Table.
Click [Delete] to delete the selected settings.
Delete all the settings assigned to the [Button/Knob]-[Function] you want to change.
7 Assign a new function to the Button/Knob.
Refer to [Preferences]-[Controller Manager] and [Assignable MIDI Controls]
in the "TRAKTOR 2 Application Reference" manual that is found under Help menu of TRAKTOR 2 for
further details of assigning functions.

11
Settings sample of DJM-T1 ADVANCED SHIFT
"APPENDIX - Function list of settings sample of DJM-T1 ADVANCED SHIFT"

12

13

14

15

16
*1 Functions with this remark only work when upgraded to TRAKTOR SCRATCH PRO 2.
When using TRAKTOR SCRATCH DUO 2, the functions do not work properly.
Effect mode (SINGLE/ GROUP) can be switched by setting in Preferences > Effects > FX Panel Mode of TRAKTOR 2.
*2 The following functions are availabe when SAMPLE SLOT numbers of the relevant Decks are selected.
SAMPLE DECK C(D) SLOT# VOLUME MAX
SAMPLE DECK C(D) SLOT# VOLUME CONTROL
SAMPLE DECK C(D) SLOT# PLAY MODE SWITCH
Press and hold the SAMPLE SLOT number while being in ADVANCED SHIFT mode; then, use the button or the knob of the function selected
from the above three. Press and hold the SAMPLE SLOT number while using ADVANCED SHIFT functions.
The procedures for using the functions associated with SAMPLE SLOT numbers are as follows:
Example: When you want to call out SAMPLE DECK C SLOT# VOLUME Control:
1Press the [SELECT] button on DECK C to switch to Sampler function.
2Press the [SHIFT] button twice consecutively and you will see the [SHIFT] button light.
3Press and hold [SHIFT] button. You will see the [SHIFT] button flashing, and now you are in ADVANCED SHIFT mode.
While the [SHIFT] button is held, you stay in ADVANCED SHIFT mode.
4While continuing the above (3), press and hold the [HOT CUE/SAMPLER] button associated with the SAMPLE SLOT number you want to
select. Now, the SAMPLE SLOT is selected.
5While continuing the above (4), turn [AUTO LOOP] knob to call out SAMPLE DECK C SLOT# VOLUME CONTROL to control volume of the
selected SAMPLE SLOT.
*3 If you upgrade to TRAKTOR SCRATCH PRO 2, select "Advanced" in Preferences > Decks > Deck Layout > Size A & B.

PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
PIONEER ELECTRONICS (USA) INC.
P. O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: [phone]
PIONEER ELECTRONICS OF CANADA, INC.
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: [phone]
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: [phone]
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: [phone]
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: [phone]
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: [phone]
© 2011 PIONEER CORPORATION.
All rights reserved.
•TRAKTOR is the registered trademark of Native Instruments GmbH.
• Windows®, Windows 7, Windows Vista®and Windows XP are the registered trademarks and trademarks of
Microsoft Corporation registered in the United States of America and other countries.
• Mac OS is the trademark of Apple Inc. registered in the United States of America and other countries.
<DRI1028-B>