Pioneer SX-S30 User manual

English Français Español
Language select / Sélection de la langue / Selección de idioma
SX-S30

E
N
Before Start
What's in the box .................................................................... 2
Part Names
Front Panel ............................................................................. 3
Rear Panel .............................................................................. 4
Remote Controller .................................................................. 5
Display .................................................................................... 6
Install
1. Connect the Speakers ........................................................ 7
2. Connect the TV ................................................................... 8
3. Connect the HDMI AV Components ................................... 9
4. Connect the Audio Components ....................................... 10
5. Connect Other Cables .......................................................11
Initial Setup
Initial Setup with Auto Start-up Wizard ................................. 12
Playback
AV Component Playback ...................................................... 15
Internet Radio ....................................................................... 16
Spotify ................................................................................... 18
Music Server ......................................................................... 19
USB Storage Device ............................................................. 21
AirPlay® ................................................................................ 23
BLUETOOTH® Playback ......................................................24
Listening to the FM Radio ..................................................... 25
Listening Modes ................................................................... 26
AV Adjust .............................................................................. 28
Advanced Setup
System Setup ........................................................................ 30
MCACC ................................................................................. 39
Network/Bluetooth ................................................................. 41
Firmware Update
Firmware Update .................................................................. 44
Others
Troubleshooting .................................................................... 47
General Specifications .......................................................... 52
About HDMI .......................................................................... 54
License and Trademark Information ..................................... 55
> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
NETWORK STEREO RECEIVER
SX-S30
Instruction
Manual

2
> Before Start > Part Names > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
E
N
Before Start
What's in the box
0 Connect speakers with 4 Ω to 8 Ω impedance.
0The power cord must be connected only after all other cable connections are completed.
0We will not accept responsibility for damage arising from the connection of equipment
manufactured by other companies.
0Functionality may be introduced by firmware updates and service providers may cease
services, meaning that some network services and content may become unavailable in
the future. Furthermore, available services may vary depending on your area of
residence.
0Specifications and appearance are subject to change without prior notice.
Main unit (1)
Remote controller (RC-933R) (1), batteries (AAA/R03) (2)
Speaker setup microphone (1)
Indoor FM antenna (1)

> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
3
E
N
Part Nam es
Front Panel
1. ÍSTANDBY/ON button: Turns the unit on or into standby mode.
2. DIRECT button: This switches the unit to the "Direct" mode (ÄP26) which shuts down
processing that affects sound quality, so sound closer to the original is reproduced. Press
again to cancel.
DIRECT indicator: This lights when the listening mode is "Direct" or "Pure Direct". The
display section and other indicators are turned off at this time.
3. Display (ÄP6)
4. Remote control sensor
5. NETWORK indicator: When the power of the unit is on, this lights when "NET" is selected
with the input selector and the unit is connected to the network. If the unit is in standby
mode, this lights when functions such as HDMI CEC and Network Standby are enabled.
6. INPUT SELECTOR dial: Switches the input to be played. (BD/DVD / CBL/SAT / GAME /
STRM BOX / CD / TV / PHONO / FM / NET / USB / BT AUDIO)
7. MASTER VOLUME dial: Allows you to adjust the volume.
8. PHONES jack: Stereo headphones with a mini plug (Ø 3.5 mm) are connected.
9. BASS dial: Adjusts the bass.
10. TREBLE dial: Adjusts the treble.
11. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to turn the
display off.
12. USB port: A USB storage device is connected so that music files stored in it can be
played. You can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.
 
  




4
> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
E
N
Rear Panel
1. ANTENNA FM UNBAL 75Ω jack: Connect the supplied antenna.
2. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled
device. The diagram shows the movable range for the wireless antenna. Do not try to
force it beyond this range otherwise you may break it.
3. AUDIO IN jacks: Input AV component audio signals with an analog audio cable.
4. SIGNAL GND terminal: The ground wire of the turntable is connected.
5. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals
with a digital optical cable or digital coaxial cable.
6. SETUP MIC jack: The supplied speaker setup microphone is connected.
7. Power cord
8. NETWORK port: Connect to the network with an Ethernet cable.
9. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a
TV.
10. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an
AV component.
11. SPEAKERS terminals: Connect speakers with speaker cables. When using banana
plugs, first tighten the speaker terminals and then insert the banana plugs.
12. SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.
180°
90°

 



  




> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
5
E
N
Remote Controller
1. Í button: Turns the unit on or into standby mode.
2. Input selector buttons: Switches the input to be played.
3. (AV ADJUST) button: You can perform common settings on the TV screen. (ÄP28)
4. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.
5. button: Displays the Home.
6. Volume buttons: Allows you to adjust the volume. This button also cancels the muting.
7. button: Temporarily mutes audio. Press again to cancel muting.
8. Listening mode buttons: Allows you to select the listening mode. (ÄP26)
9. Play buttons: You can start play of the Music Server or USB.
10. button: You can start repeat or random play of the Music Server or USB.
CLEAR button: Deletes all characters you have entered when entering text on the TV
screen.
11. (STATUS) button: Switches the information on the display.
12. button: Returns the display to the previous state during setting.
13. DIMMER button: You can switch the display off or adjust the brightness of the display in
three steps.
14. MODE button: Switches tuning to an FM station between automatic tuning and manual
tuning.
15. +Fav button: Used to register FM radio stations.















30°
30°
Approx.5 m
(16 ft.)

6
> Before Start >PartNames > Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
E
N
Display
1. Lights in the following conditions.
HDMI: HDMI signals are input and selected.
ARC: Audio signals from the ARC compatible TV are input and selected.
USB: When "USB" is selected with the input selector and the unit is connected by USB
and the USB device is selected. Flashes if the USB is not properly connected.
NET: When "NET" is selected with the input selector and the unit is connected to the
network. It will flash if the connection to the network is not correct.
DIGITAL: Digital signals are input and the digital input selector is selected.
2. Lights when operating the "NET" or "USB" input selector indicating remote controller
cursor operations are possible in screens showing list of tracks, for example.
3. Lights when headphones are connected.
4. Lights when operating the "NET" or "USB" input selector when tracks are played or
paused.
5. Lights according to the type of input digital audio signals and the listening mode.
6. Lights in the following conditions.
AUTO: When FM tuning mode is auto.
TUNED: Receiving FM radio.
FM STEREO: Receiving FM stereo.
SLEEP: Sleep timer has been set.
ASb: When Auto Standby function is enabled. (ÄP37)
7. Flashes when muting is on.
8. Displays various information of the input signals. Characters that cannot be displayed on
this unit are replaced with asterisks ( ＊).

Neo:6




 

7
> Before Start > Part Names >Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
E
N
Install
1. Connect the Speakers
a Speaker cable, b Subwoofer cable
3
2
1
1/2˝
(12 mm)
1
3 4
2
a
b
Refer to the illustration to connect the speaker system.
Twist the wires of the speaker cable tightly before inserting
into the SPEAKERS terminals. After inserting the cables,
tighten the terminals firmly by turning to the right. Make
correct connection between the unit’s jacks and speaker’s
jacks (+ to + and – to –) for each channel. If connection is
wrong, a bass sound may become poor due to reverse
phase.
To connect a powered subwoofer, use a subwoofer cable
and connect to the SUBWOOFER PRE OUT jack.
Make sure the exposed wires of the speaker cable do not
stick out of the speaker terminals when connecting. If the
exposed wires of the speaker cable touch the rear panel or
the + and – wires touch each other, the protection circuit will
be activated. (ÄP47)
Setup
0Settings for the speaker configuration you have connected
need to be made in "1. Full Auto MCACC" (ÄP13) in Initial
Setup.

8
> Before Start > Part Names >Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
E
N
2. Connect the TV
a HDMI cable, b Digital optical cable
a
b
DIGITAL
OPTICAL OUT
1
To ARC TV
For a TV that supports the ARC (Audio Return Channel)
(ÄP54) feature, use an HDMI cable and connect according
to illustration "a". Choose an HDMI IN jack on the TV that
supports ARC when connecting.
To Non-ARC TV
For a TV that does not support the ARC (Audio Return
Channel) feature, connect both the HDMI cable in illustration
"a" and the digital optical cable in "b".
Setup
0Settings are required to use the ARC function. Select
"Yes" in "4. Audio Return Channel" (ÄP14) in the Initial
Setup.
0Please refer to the TV’s operation manual for directions on
connections and setup for the TV.

9
> Before Start > Part Names >Install > Initial Setup > Playback
Advanced Setup | Firmware Update | Others
E
N
3. Connect the HDMI AV Components
a HDMI cable
e.g. BD
a
HDMI OUT
1
a
BD/DVD GAME
Cable/Satellite
set-top box
Streaming media
player
This is an example of connection with an AV component
that has an HDMI jack. With connection to an AV
component that conforms with the CEC (Consumer
Electronics Control) standard, you can use features such as
the HDMI CEC feature that links with the input selector, and
the HDMI Standby Through feature which allows you to
play video and audio from AV components on the TV even
when this unit is in standby mode. (ÄP54)
0To play 4K or 1080p video, use the high speed HDMI
cable.
Setup
0Settings are required to use the HDMI CEC and HDMI
Standby Through features. (ÄP35, 36) Make settings after
all connections are complete.
0To enjoy digital surround sound including Dolby Digital,
audio output should be set to "Bitstream output" on the
connected Blu-ray Disc player or other device.