Note:
1. ON/OFF button - Short press for turn on / 3 second long press for turn off
2. OSD Menu – On Screen Display menu
3. When you press SAVE button or use SAVE function on OSD menu, the screen will flash to
notify you that the save is done
1)When you change the PC resolution (VGA input resolution), the screen setting will restore to
default. For example: Current PC resolution is 1920x1080, and the user change to 1280x720,
the screen’s setting will restore to default, but if the user switch back to 1920x1080, the screen
will restore to previous setting saved on 1920x1080 (In case that you do not SAVE any new
setting on 1280x720). SAVE on current resolution will overwrite previous saved setting
2)When you change NTSC/PAL mode, the screen output may not scale properly (since the
resolution between NTSC/PAL modes are different and pervious saved setting on previous
mode may affect the screen to scale properly). Please select DEFAULT function on OSD
menu to restore to factory default, then the screen will scale properly.
(Please note that it will clear all saving setting on pervious mode).
Important notice:
Connection Output
Input
Orion-V1 User manual
VGA to AV/S-video converter
(with audio and VGA bypass)
Audio input
(3.5mm audio jack)
VGA input
Front button panel
S-video output
Power
adapter
Audio output
(Right channel)
Audio output
(Left channel)
AV video output
VGA output
Status light
Master power switch
NTSC / PAL switch
DC Jack
(connect to power adapter)
Bypass From
VGA Input
MODE 1 2 3 4 5 6 7 8
MAIN ON/OFF OSD MENU
SCREEN
POSITION
ADJUSTMENT
- UP
SCREEN
POSITION
ADJUSTMENT
- DOWN
SCREEN
POSITION
ADJUSTMENT
- LEFT
SCREEN
POSITION
ADJUSTMENT
- RIGHT
SCREEN RATIO
16:9 / 4:3 SAVE
KEY
ON/OFF
OSD MENU
MODE
EXIT OSD
MENU UP DOWN LEFT RIGHT