pitsco TALL CABINET User manual

79130
TALL CABINET
Assembly Instructions

Content advising by Jason Lee.
SolidWorks® Composer™ renderings by Tim Lankford. Keyshot® cover renders by Jason Redd.
Desktop publishing by Todd McGeorge.
©2020 Pitsco, Inc., 915 E. Jefferson, Pittsburg, KS 66762
All rights reserved. This product and related documentation are protected by copyright and are distributed under licenses
restricting their use, copying, and distribution. No part of this product or related documentation may be reproduced in any
form by any means without prior written authorization of Pitsco, Inc.
All other product names mentioned herein might be the trademarks of their respective owners.
V1.0
07/20
Safety
• Always wear safety glasses when using a drill to tighten screws.
• Keep fingers and loose articles of clothing clear of the drill.
Recommended/Required Tools
• Corded or cordless drill/driver
• 1/4" drill bit
• Driver bits including #2 Phillips head and 5/32" hex (Confirmat screw)
• Phillips-head screwdriver
• Rubber mallet/hammer

1x Back 42686
1x Right Side 42684
1x Left Side 42685
2x Top and Bottom 42689
Tall Cabinet Parts Overview
79130
1x Divider 42691
Tall Cabinet Assembly Instructions
1

4x Shelf 42690
1x Toe Kick 42692
1x Left Door 42688
1x Right Door 42687
Tall Cabinet Assembly Instructions
2

7x Pan Head Screw (#10 x 5/8") 17989
4x Pan Head Screw (8-32 x 1") 18676
52x Flathead Confirmat Screw 23353
1x Cam Lock 28419
1x Heavy-Duty Door Strike 31303
1x Cam Lock Plate 28419
1x Door Strike (1/8" x 3" x 6") 28794
72x Phillips-Head Wood Screw (#8 x 3/4") 26089
8x Plastic Guide 11043
2x Pull 12150
8x Institutional Hinge 28311
4x Fluted Dowel Pin (8 mm x 25 mm) 11991
Tall Cabinet Assembly Instructions
3

Step 1 Parts Needed
4x
Fluted Dowel Pin (8 mm x 25 mm)
11991
1x
Toe Kick
42692
1x
Back
42686
1x
Right Side
42684
1x
Left Side
42685
2x
Top and Bottom
42689
1x
Divider
42691
4x
Shelf
42690
52x
Flathead Confirmat Screw
23353
8x
Plastic Guide
11043
Tall Cabinet Assembly Instructions
4

Step 1.0 Note: It is recommended to assemble the cabinet facedown and
then, with help, turn it upright to install the shelves and doors.
Make sure the floor is completely clean to prevent scratching the
edgebanding during assembly and standing it up.
Right Side 42684
Top
Tall Cabinet Assembly Instructions
5

Detail 1
Tall Cabinet Assembly Instructions
6

Detail 2
Tall Cabinet Assembly Instructions
7

Step 1.1
Tall Cabinet Assembly Instructions
8

Detail 1
Detail 2
Tall Cabinet Assembly Instructions
9

Detail
Step 1.2
Toe Kick Assembly
Tall Cabinet Assembly Instructions
10

Step 1.3
Step 1.4 Left Side 42685
Tall Cabinet Assembly Instructions
11

Detail
Tall Cabinet Assembly Instructions
12

Step 1.5
Tall Cabinet Assembly Instructions
13

Detail
Tall Cabinet Assembly Instructions
14

Detail 1
Step 1.6
Tall Cabinet Assembly Instructions
15

Detail 2
Tall Cabinet Assembly Instructions
16

Step 1.7 Note: Carefully place the Back
(42686) onto the structure with
the blue side facing out, and slide
it into position, making sure it is
level with the sides at the bottom.
*
Tall Cabinet Assembly Instructions
17

Detail 1
Step 1.8 Note: After the back is
placed and leveled, drill
pilot holes with a 1/4" drill
bit before attaching it with
Confirmat screws.
Tall Cabinet Assembly Instructions
18