Planar PL1500M User manual

PL1500M
LCDMonitor
USER’SGUIDE
www.planar.com

The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright. All
rights are reserved. No part of this document may be reproduced, translated to
another language or stored in a retrieval system, or transmitted by any means,
electronic, mechanical, photocopying, recording, or otherwise, without prior written
permission.
Windows is a registered trademark of Microsoft, Inc.
Other brand or product names are trademarks of their respective holders.

Contents
Monitor Features......................................................................................................................................1
Content of Package.................................................................................................................................2
Quick Start..................................................................................................................................................3
Front Panel Controls ................................................................................................................3
Quick Start..................................................................................................................................................4
Set-up Instructions..................................................................................................................................5
Making the Connections........................................................................................................5
Tilting the Monitor...................................................................................................................6
Mounting the Monitor............................................................................................................6
Power Management Feature ...............................................................................................................7
Adjusting Monitor Settings..................................................................................................................8
OSD Main Menu ........................................................................................................................8
Auto setup...................................................................................................................................9
Management Sub-menu .................................................................................................... 10
Clock/Phase Sub-menu ....................................................................................................... 11
Color Sub-menu..................................................................................................................... 12
OSD Display sub-menu ....................................................................................................... 13
Factory Recall .......................................................................................................................... 14
Exiting OSD.............................................................................................................................. 15
Using the Direct Keys ...........................................................................................................15
Technical Information ......................................................................................................................... 16
Monitor Specifications......................................................................................................... 16
Video Modes............................................................................................................................ 17
Troubleshooting.................................................................................................................................... 19
Safety Precautions................................................................................................................................ 21
Maintenance Guidelines .................................................................................................................... 22
Regulatory Information...................................................................................................................... 23
Agency Approvals ................................................................................................................. 23
FCC Statement........................................................................................................................ 23
Index.......................................................................................................................................................... 24

1
Monitor Features
The monitor features include:
ÖAutomatic configuration to the computer video settings with the maximum
XGA resolution
ÖThree control buttons plus OSD (on-screen display) for the monitor setting
adjustment and configuration with ease and instant feedback
ÖA swivel feature that enables viewing flexibility
ÖA tilt feature to optimize the viewing position
ÖAn anti-glare coating on the panel to reduce the reflection of the ambient light
ÖFlicker-free performance across all recommended video modes
ÖSupporting high refresh rates up to 75 Hz
ÖVESA DDC2B Plug-and-Display compliant
ÖVESA mounting interface on stand base
ÖA power-saving feature that is compatible with Microsoft®Windows
ÖCompliance with Swedish MPR II guidelines for reduced electromagnetic
emissions

2
Content of Package
When you are unpacking the monitor, make sure that you have the following items:
ÖLCD monitor
ÖAC power adapter with attached power cable
ÖPower cord
ÖAnalog video signal cable
ÖAudio signal cable
ÖUser’s Manual
ÖPlanar landing strip
ÖPlanar Connection CD-ROM
If you find that any of these items are missing or appear damaged, please contact
your dealer immediately. Do not throw away the packing material or shipping
carton in case you need to ship or store the LCD Monitor in the future.

3
Quick Start
This latest LCD monitor has a 15-inch active matrix TFT (thin film transistor) liquid
crystal display module. It is designed for use with any Windows®-based computer.
The monitor’s compact-sized design provides great space savings on your computer
desk.
Front Panel Controls
There are one Power button and three control buttons on the front panel of the
monitor, as well as a power indicator for power status indication.
Power Button
Use the Power button located at the lower right side of the front panel of your
display to turn on and off the monitor.
The power indicator will illuminate in green color
while the monitor is on, and illuminate in amber color when the monitor is in a reduced power
mode.
Note: Because of the technology used in LCD panels, screen savers will not
prolong the life of your monitor. So if the monitor will not be used for an extended
period, be sure to turn it off.
Warning
To completely disconnect power from your display, you must
remove the power cord from the wall outlet and then remove the
p
ower cable from the monitor.

4
Quick Start
Control Buttons
The functions of the three control buttons which are located at the lower left side of
the front panel of your display are described as below:
Button Function
Select (1) Display the OSD Main Menu.
(2) Perform the function selected in the OSD menu.
Up (△) (1) Move upward to select an item, or increase the setting
value in the adjustment bar.
(2) Display the audio menu (direct key function).
Down (▽) (1) Move downward to select an item, or decrease the
setting value in the adjustment bar.
(2) Perform Auto setup (direct key function).

5
Set-up Instructions
Making the Connections
Note: Place the monitor on a flat, sturdy surface. Select an area free from
excessive heat, moisture, and sunlight.
Before connecting any cables, make sure that both the computer and monitor are
turned off.
1. Connect the AC power adapter with the power cord.
2. Connect the power cord to the power jack on the back of the monitor (as shown
below).
3. Plug the power cord into a power outlet, and plug the other end into the AC
power adapter.
4. Plug the analog video signal cable into the Analog Video Input port on the back
of the monitor (as shown above).
5. Connect the other end of the video signal cable into your computer’s video port.
(Please check your computer’s documentation if you’re not sure where the port
is located.)
6. Plug the audio signal cable to the Audio port on the back of the monitor;
connect the other end of audio signal cable to your computer’s audio port.

6
Tilting the Monitor
The monitors have a tilt feature that allows you to tilt the monitor back and forth as
well as left and right to find the most comfortable viewing position. To tilt the
monitor, grasp the sides and push the monitor back or pull it toward you, or turn it
left or right until it is in the desired position. The monitor can be tilted 20º backward
and 5º forward, or 45º left and 45º right.
Note: Do not tilt the monitor by grasping the top edge.
Mounting the Monitor
You can remove the monitor base to mount the monitor on a wall, a swing arm or
other mounting fixture.
Note: Be sure to turn off the monitor and disconnect all cables before
beginning the disassembling procedure.
1. Lay the front bezel down on a soft area.
2. Remove the screw at the bottom of the monitor base.
3. Remove the four screws as shown in the following illustration.
3. Remove the monitor base from the monitor.
4. To mount the monitor, follow the instructions included with the mounting
fixture to be used.

7
Power Management Feature
Many computers support industry standard power-save signaling techniques. The
power management features reduce the monitor’s power consumption after a
period of keyboard or mouse inactivity.
When your computer supplies power saving signals to the monitor, the monitor’s
power management features reduce power consumption to low levels when your
computer goes into its power-saving mode.
When the monitor is in a power-saving mode, the screen is blank and the power
indicator is amber. Pressing a key on the keyboard or moving the mouse restores the
image in several seconds. Consult your computer documentation for information
about setting the power-saving modes.
If your computer doesn’t use industry standard power-save signaling techniques,
you can reduce power consumption by turning off the monitor when it will not be
used for an extended period of time. You can turn the monitor off even if you leave
your computer running.

8
Adjusting Monitor Settings
Use the OSD to easily adjust the screen image based on your viewing preferences.
Note: You must perform Auto setup before making any adjustment.
Note: For the best display performance, it is strongly recommended that you
use Auto setup to automatically configure your monitor’s settings.
OSD Main Menu
To display the OSD Main Menu, press the Select button.
The following table briefly describes each of the items in the OSD Main Menu.
Item Description
Auto setup Automatically configure the monitor’s settings. See “Auto setup”
on page 9.
Management Open the Management sub-menu where you can select
Brightness, Contrast or the image position for further
adjustment. See “Management Sub-menu”on page 10.
Clock/Phase Open the Clock/Phase sub-menu where you can select Clock or
Phase for further adjustment. See “Clock/Phase Sub-menu” on
page 11.
Color Open the Color sub-menu where you can select Color Temp,
Black Level Adjust and RGB Adjust for further adjustment. See
“Color Sub-menu”on page 12.
OSD Display Open the OSD Display sub-menu where you can select H.
Position or V. Position of the OSD display for further
adjustment. See “OSD Display sub-menu” on page 13.
Factory Recall Restore the factory default setting values. See “Factory Recall” on
page 13.
Language Open the Language sub-menu where you can select one of the
five languages for your preference in displaying the OSD
messages. See “
Language Sub-menu” on page 14.
Exit Clear and exit the OSD Main Menu. See “
Exiting OSD” on page 15.
Selecting Items in OSD
To select items in the OSD Main Menu, use the Up (△)or Down (▽)buttons on the
front panel of the monitor.
To select items in the OSD sub-menus, use all three, control buttons. Use the Up (△)
or Down (▽)buttons to move to a specific item, and accept the selection by
pressing the Select button.

9
Auto setup
Use Auto setup whenever you apply a new video mode or change the refresh rate.
While Auto setup is running, you should have a stable image displayed on the
screen. Do not move items around the screen, play games, or view video during
Auto setup.
Once you have performed Auto setup for a particular mode, the monitor will store
the new values in its permanent memory.
To perform the Auto setup function:
1. Press the Select button to display the OSD Main Menu.
2. The Auto setup icon is highlighted.
3. Press the Select button to perform the Auto setup function. The following
message will appear on the screen.
If the image looks correct, select Yes.
OR
If the image requires further adjustment, select No. The Phase bar will appear
for you to perform manual adjustments. Press the Up (△) or Down (▽) buttons
to change the setting value. When all text appears focused and there is no
instability in the image, press the Select button to exit the adjustment.

10
Management Sub-menu
To perform the adjustment in the Management sub-menu:
1. Press the Select button to display the OSD Main Menu.
2. Press the UP (△) or Down (▽) button to move to the Management icon in the
OSD Main Menu, and press the Select button.
3. The screen displays four items for adjustment: Brightness, Contrast, H. Position
and V. Position.
a. Press the Up (△)or Down (▽)button to move the desired item and press
the Select button.
b. Press the Up (△)or Down (▽)button to change the setting value in the
adjustment bar.
c. After changing the setting value, press the Select button to accept the
adjustment.
4. After the adjustment, select EXIT to go back to the OSD Main Menu.

11
Clock/Phase Sub-menu
To adjust the “Clock/Phase”sub-menu you should follow the steps below:
1. Press the Select button to display the OSD Main Menu.
2. Press the UP (△) or Down (▽) button to move to the Clock/Phase icon in the
OSD Main Menu, and press the Select button.
3. The screen displays two items for adjustment: Clock and Phase.
a. Press the Up (△)or Down (▽)button to move the desired item and press
the Select button.
b. Press the Up (△)or Down (▽)button to change the setting value in the
adjustment bar.
c. After changing the setting value, press the Select button to accept the
adjustment.
4. After the adjustment, select EXIT to go back to the OSD Main Menu.

12
Color Sub-menu
To do adjustment in the “Color”sub-menu you should follow the steps below:
1. Press the Select button to display the OSD Main Menu.
2. Press the UP (△) or Down (▽) button to move to the Color icon in the OSD
Main Menu, and press the Select button.
3. The screen displays three items for adjustment: Color Temp, Black Level Adjust
and RGB Adjust.
a. Press the Up (△)or Down (▽)button to move the desired item and press
the Select button.
b. Press the Up (△)or Down (▽)button to change the setting value in the
adjustment bar.
c. After changing the setting value, press the Select button to accept the
adjustment.
4. After the adjustment, select EXIT to go back to the OSD Main Menu.

13
OSD Display sub-menu
To adjust the OSD H and V, positions you should follow the steps below:
1. Press the Select button to display the OSD Main Menu.
2. Press the UP (△) or Down (▽) button to move to the OSD Display icon in the
OSD Main Menu, and press the Select button.
3. The screen displays two items for adjustment: H. Position and V. Position.
a. Press the Up (△)or Down (▽)button to move the desired item and press
the Select button.
b. Press the Up (△)or Down (▽)button to change the setting value in the
adjustment bar.
c. After changing the setting value, press the Select button to accept the
adjustment.
4. After the adjustment, select EXIT to go back to the OSD Main Menu.

14
Factory Recall
To recall factory settings back you should follow the steps below:
1. Press the Select button to display the OSD Main Menu.
2. Press the UP (△) or Down (▽) button to move to the Factory Recall icon in the
OSD Main Menu, and press the Select button.
3. Press the Select button to restore the factory default setting values.
Language Sub-menu
To select one of the five languages for your preference you should follow the steps
below:
1. Press the Select button to display the OSD Main Menu.
2. Press the UP (△) or Down (▽) button to move to the Language icon in the OSD
Main Menu, and press the Select button.
3. The screen displays five languages for selection.

15
Press the Up (△)or Down (▽)button to move the desired language and press the
Select button. The change will take effect immediately.
Exiting OSD
To exit OSD, press the UP (△) or Down (▽) button to move to the EXIT icon in the
OSD Main Menu, and press the Select button.
Using the Direct Keys
You can use two direct keys for adjustment without entering OSD. One of the two
direct keys is for Auto setup, and the other is for the audio function.
Performing Auto setup by Direct Key
To perform Auto setup by direct key, without entering OSD, simply press the Down
(▽)button and Auto setup will start. See “Auto setup” on page 9 for Auto setup
procedure.
Performing the Audio Function by Direct Key
To perform the audio function by direct key:
1. Without entering OSD, simply press the Up (△)button to display the audio
menu.
2. The screen displays two items for selection: Audio Mute and Volume.
a. Press the Up (△)or Down (▽)button to move the desired item and press
the Select button.
b. Press the Up (△)or Down (▽)button to change the setting.
c. After changing the setting value, press the Select button to accept the
adjustment.
3. After the adjustment, select EXIT to go back to the OSD Main Menu.

16
Technical Information
Monitor Specifications
Item Specification
LCD Module 15-in, active matrix TFT, anti-glare coating, 0.297
mm pixel pitch
Display Size 304 mm x 228 mm
Viewing Angle
Left/Right
Up/Down
-70°/ 70°(Typical)
-65°/ 60°(Typical)
Display Colors 262144 (6 bits/color)
Power Input 100 ~ 240 VAC Full Range, 50/60 Hz (External AC
adapter)
Maximum power consumption < 30W
Signal Input
Video Signal
Sync signals
RGB positive 0.7VPP, 75ohm
Separate & Composite, TTL Level
Line (horizontal) frequency 30 kHz ~ 60 kHz
Raster (vertical) frequency 56 Hz ~ 75 Hz
Pixel dot clock 80 MHz (maximum)
Recommended mode 1024 x 768 @ 60 Hz
Pedestal tilt 20°backward, 5°forward；45°left, 45°right
Dimensions (W x H x D) 341 x 323 x 140 mm (with base)
Weight 3.0 kg
Operating Conditions
Temperature
Humidity
Altitude
5°~ 40°C at altitude 0 ~ 2,000m
5°~ 30°C at altitude 2,000 ~ 3,000m
20% ~ 85% RH, non-condensing
3000m Max.
Storage Conditions
Temperature
Humidity
Altitude
-20°~ 60°C
5% ~ 95% RH
10,000m Max.

17
Video Modes
The monitor supports the following industry-standard combinations of screen
resolution and refresh rates. Other combinations are possible, but may require
adjustments to the image.
For the optimal performance, set your computer to a screen resolution of 1024 x 768
at a 60 Hz refresh rate.
Display Mode Hsync (kHz) Vsync (Hz) Dot Frequency (MHz)
640 x 350 31.5 70 25.175
31.5 60 25.175
37.9 72 31.5
37.5 75 31.5
VGA 640 x 480
35.0 70 28.56
35.1 56 36.0
37.9 60 40.0
48.1 72 50.0
46.9 75 49.5
SVGA 800 x 600
43.75 70 45.5
48.4 60 65.0
56.5 70 75.0
60.0 75 78.75
XGA 1024 x 768
57.672 72 78.434
US TEXT 720 x 400 31.5 70 28.3
640 x 480 35.0 67 30.5
Power
MAC 832 x 624 49.7 75 57.3
Note: The monitor is capable of going beyond these recommended modes.
Setting the Video Mode
Since the inherent format of this display is 1024 pixels by 768 lines, the monitor will
perform best when your computer is set to a screen resolution of 1024 x 768. If you
use a lower resolution (such as 640 x 480), the image is expanded to fill the screen.
Your display supports many common video modes, as shown in “Video Modes” on
page 17. Check the documentation supplied with your computer and video adapter
card to find out which modes they support.
To see what video mode is in use within Microsoft Windows, please check Windows’
settings in your computer.