Planet Networking & Communication HTS-1000P User manual
– 5 – – 6 –
4.WebUISpecications
Interface Description
Janitor Function of calling janitor.
Intercom
Intercom can be had via the HDP-1100PT
to view visitor and talk to him/her upon
the door phone call.
Camera
Connected to surveillance cameras, the
HDP-1100PT is able for you to view the
areas around your house.
Contacts The contacts that are permitted to
communicate with the HTS-1000P.
Control To control lighting or other Z-Wave devices’
switches
Setup Conguration of the HTS-1000P.
5. Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource and User’s Manual on PLANET Web
site rst to check if it could solve your issue. If you need
more support information, please contact PLANET Home
Automation support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq.php?key=HTS-
1000P
Home Automation support team mail address:
support@planet.com.tw
HTS-1000P User’s Manual:
http://www.planet.com.tw/en/support/download.
php?model=48703&type=3#list
Copyright © PLANET Technology Corp. 2015.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
– 1 – – 2 –
– 3 – – 4 –
1. Verify the Contents Inside the
Package Box
The package should contain the following items plus
HTS-1000P. If any item is missing or damaged, please
contact the seller immediately.
Quick Installation Guide Wall-mounted Kit
RJ45 Cable Power Adapter
2.PhysicalSpecications
Dimensions (W x D x H) 258 x 163 x 24 mm
Weight 620g (gross weight)
10.1 inch Multi Touch Panel
Volume (+/–)
Tab (+/–)
SD/SDHC (void)
Home
Interface Description
Volume (+/–) Press to adjust the volume.
Tab (+/–) Press to select the next (+) or previous (–)
item.
Home Press to display the HTS-1000P Home Menu.
SD/SDHC Future Feature.
USB Socket (void)
HDMI (void)
Micro USB (void)
Power Jack
Switch
RJ45
Interface Description
Switch Power switch to turn on/off the HTS-1000P.
Power Jack
The input power is 12V DC.
Note
Use th power adapter included in the
package; otherwise, it may damage
the unit and result in danger.
HDMI Future Feature.
Micro USB Future Feature.
USB Socket Future Feature.
RJ45 (LAN
socket,
PoE)
Connect to Router or Hub/Switch
It is for connection with 10BASE-T Ethernet,
100BASE-TX or 1000BASE-T Ethernet
cabling. This Ethernet port with auto-
negotiation protocol can detect or negotiate
the transmission speed of the network
automatically. Please use Cat5 cable to
connect the HTS-1000P to an Ethernet
network switch or hub.
Note
ONLY use one power source, either
from DC or from 802.3af Power
over Ethernet.
3. Prior Installation Requirements
1. The HTS-1000P is for the indoor environment and cannot
be installed in the outdoor environment.
2. The IP address can be obtained via router or set the
static IP at Network Setting.
3. The default setting is below:
Default DHCP Client On
Default Login User Name admin
Default Login Password admin
– 1 – – 2 –
– 3 – – 4 –
1. Verify the Contents Inside the
Package Box
The package should contain the following items plus
HTS-1000P. If any item is missing or damaged, please
contact the seller immediately.
Quick Installation Guide Wall-mounted Kit
RJ45 Cable Power Adapter
2.PhysicalSpecications
Dimensions (W x D x H) 258 x 163 x 24 mm
Weight 620g (gross weight)
10.1 inch Multi Touch Panel
Volume (+/–)
Tab (+/–)
SD/SDHC (void)
Home
Interface Description
Volume (+/–) Press to adjust the volume.
Tab (+/–) Press to select the next (+) or previous (–)
item.
Home Press to display the HTS-1000P Home Menu.
SD/SDHC Future Feature.
USB Socket (void)
HDMI (void)
Micro USB (void)
Power Jack
Switch
RJ45
Interface Description
Switch Power switch to turn on/off the HTS-1000P.
Power Jack
The input power is 12V DC.
Note
Use th power adapter included in the
package; otherwise, it may damage
the unit and result in danger.
HDMI Future Feature.
Micro USB Future Feature.
USB Socket Future Feature.
RJ45 (LAN
socket,
PoE)
Connect to Router or Hub/Switch
It is for connection with 10BASE-T Ethernet,
100BASE-TX or 1000BASE-T Ethernet
cabling. This Ethernet port with auto-
negotiation protocol can detect or negotiate
the transmission speed of the network
automatically. Please use Cat5 cable to
connect the HTS-1000P to an Ethernet
network switch or hub.
Note
ONLY use one power source, either
from DC or from 802.3af Power
over Ethernet.
3. Prior Installation Requirements
1. The HTS-1000P is for the indoor environment and cannot
be installed in the outdoor environment.
2. The IP address can be obtained via router or set the
static IP at Network Setting.
3. The default setting is below:
Default DHCP Client On
Default Login User Name admin
Default Login Password admin
– 1 – – 2 –
– 3 – – 4 –
1. Verify the Contents Inside the
Package Box
The package should contain the following items plus
HTS-1000P. If any item is missing or damaged, please
contact the seller immediately.
Quick Installation Guide Wall-mounted Kit
RJ45 Cable Power Adapter
2.PhysicalSpecications
Dimensions (W x D x H) 258 x 163 x 24 mm
Weight 620g (gross weight)
10.1 inch Multi Touch Panel
Volume (+/–)
Tab (+/–)
SD/SDHC (void)
Home
Interface Description
Volume (+/–) Press to adjust the volume.
Tab (+/–) Press to select the next (+) or previous (–)
item.
Home Press to display the HTS-1000P Home Menu.
SD/SDHC Future Feature.
USB Socket (void)
HDMI (void)
Micro USB (void)
Power Jack
Switch
RJ45
Interface Description
Switch Power switch to turn on/off the HTS-1000P.
Power Jack
The input power is 12V DC.
Note
Use th power adapter included in the
package; otherwise, it may damage
the unit and result in danger.
HDMI Future Feature.
Micro USB Future Feature.
USB Socket Future Feature.
RJ45 (LAN
socket,
PoE)
Connect to Router or Hub/Switch
It is for connection with 10BASE-T Ethernet,
100BASE-TX or 1000BASE-T Ethernet
cabling. This Ethernet port with auto-
negotiation protocol can detect or negotiate
the transmission speed of the network
automatically. Please use Cat5 cable to
connect the HTS-1000P to an Ethernet
network switch or hub.
Note
ONLY use one power source, either
from DC or from 802.3af Power
over Ethernet.
3. Prior Installation Requirements
1. The HTS-1000P is for the indoor environment and cannot
be installed in the outdoor environment.
2. The IP address can be obtained via router or set the
static IP at Network Setting.
3. The default setting is below:
Default DHCP Client On
Default Login User Name admin
Default Login Password admin
– 1 – – 2 –
– 3 – – 4 –
1. Verify the Contents Inside the
Package Box
The package should contain the following items plus
HTS-1000P. If any item is missing or damaged, please
contact the seller immediately.
Quick Installation Guide Wall-mounted Kit
RJ45 Cable Power Adapter
2.PhysicalSpecications
Dimensions (W x D x H) 258 x 163 x 24 mm
Weight 620g (gross weight)
10.1 inch Multi Touch Panel
Volume (+/–)
Tab (+/–)
SD/SDHC (void)
Home
Interface Description
Volume (+/–) Press to adjust the volume.
Tab (+/–) Press to select the next (+) or previous (–)
item.
Home Press to display the HTS-1000P Home Menu.
SD/SDHC Future Feature.
USB Socket (void)
HDMI (void)
Micro USB (void)
Power Jack
Switch
RJ45
Interface Description
Switch Power switch to turn on/off the HTS-1000P.
Power Jack
The input power is 12V DC.
Note
Use th power adapter included in the
package; otherwise, it may damage
the unit and result in danger.
HDMI Future Feature.
Micro USB Future Feature.
USB Socket Future Feature.
RJ45 (LAN
socket,
PoE)
Connect to Router or Hub/Switch
It is for connection with 10BASE-T Ethernet,
100BASE-TX or 1000BASE-T Ethernet
cabling. This Ethernet port with auto-
negotiation protocol can detect or negotiate
the transmission speed of the network
automatically. Please use Cat5 cable to
connect the HTS-1000P to an Ethernet
network switch or hub.
Note
ONLY use one power source, either
from DC or from 802.3af Power
over Ethernet.
3. Prior Installation Requirements
1. The HTS-1000P is for the indoor environment and cannot
be installed in the outdoor environment.
2. The IP address can be obtained via router or set the
static IP at Network Setting.
3. The default setting is below:
Default DHCP Client On
Default Login User Name admin
Default Login Password admin
– 5 – – 6 –
4.WebUISpecications
Interface Description
Janitor Function of calling janitor.
Intercom
Intercom can be had via the HDP-1100PT
to view visitor and talk to him/her upon
the door phone call.
Camera
Connected to surveillance cameras, the
HDP-1100PT is able for you to view the
areas around your house.
Contacts The contacts that are permitted to
communicate with the HTS-1000P.
Control To control lighting or other Z-Wave devices’
switches
Setup Conguration of the HTS-1000P.
5. Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource and User’s Manual on PLANET Web
site rst to check if it could solve your issue. If you need
more support information, please contact PLANET Home
Automation support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq.php?key=HTS-
1000P
Home Automation support team mail address:
support@planet.com.tw
HTS-1000P User’s Manual:
http://www.planet.com.tw/en/support/download.
php?model=48703&type=3#list
Copyright © PLANET Technology Corp. 2015.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
– 5 – – 6 –
4.WebUISpecications
Interface Description
Janitor Function of calling janitor.
Intercom
Intercom can be had via the HDP-1100PT
to view visitor and talk to him/her upon
the door phone call.
Camera
Connected to surveillance cameras, the
HDP-1100PT is able for you to view the
areas around your house.
Contacts The contacts that are permitted to
communicate with the HTS-1000P.
Control To control lighting or other Z-Wave devices’
switches
Setup Conguration of the HTS-1000P.
5. Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource and User’s Manual on PLANET Web
site rst to check if it could solve your issue. If you need
more support information, please contact PLANET Home
Automation support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq.php?key=HTS-
1000P
Home Automation support team mail address:
HTS-1000P User’s Manual:
http://www.planet.com.tw/en/support/download.
php?model=48703&type=3#list
Copyright © PLANET Technology Corp. 2015.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
– 5 – – 6 –
4.WebUISpecications
Interface Description
Janitor Function of calling janitor.
Intercom
Intercom can be had via the HDP-1100PT
to view visitor and talk to him/her upon
the door phone call.
Camera
Connected to surveillance cameras, the
HDP-1100PT is able for you to view the
areas around your house.
Contacts The contacts that are permitted to
communicate with the HTS-1000P.
Control To control lighting or other Z-Wave devices’
switches
Setup Conguration of the HTS-1000P.
5. Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource and User’s Manual on PLANET Web
site rst to check if it could solve your issue. If you need
more support information, please contact PLANET Home
Automation support team.
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq.php?key=HTS-
1000P
Home Automation support team mail address:
support@planet.com.tw
HTS-1000P User’s Manual:
http://www.planet.com.tw/en/support/download.
php?model=48703&type=3#list
Copyright © PLANET Technology Corp. 2015.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
Table of contents
