PLANO SYNERGY ZeroTrace User manual
ODOR NEUTRALIZER
2 3
INCLUDES
GETTING STARTED
TIMER SETTINGS
MOTION DETECTION
WARRANTY
FCC STATEMENT
4
6
8
10
11
ODOR NEUTRALIZER
4 5
GETTING STARTED
Attach the power adapter into the Zero Trace unit and
plug into a standard wall outlet.
To turn on, press and hold for one second.
The fan will start running continuously at % power.
Press to switch between % and % fan power.
To turn o, press and hold again for one second.
6 7
TIMER SETTINGS
Press to activate the 2-hour run timer.
The LED indicator ring will ash twice.
Press again to activate the motion sensor
(details on next page). The LED ring will circle twice.
Press a third time to return to continous
run mode.
2 HR MOTION
SENSOR CONTINOUS
8 9
MOTION DETECTION
When in motion detection mode, the front-facing
sensor detects even the slightest movement up to
feet away, triggering the Zero Trace unit to start
a 1 hour cycle. This insures continuous odor
neutalization throughout the day.
10 11
LIMITED WARRANTY
Subject to the terms, conditions and limitations below, Zero Trace guarantees that your purchase will be
free from defects in materials and workmanship for one (1) year from the date of purchase, for the original
owner only. Proof of purchase for warranty claims is required. Normal wear and tear are excluded.
IMPORTANT:The warranty is VOID if any of the following apply: (1) damage is caused by abuse, misuse,
neglect, or failure to precisely follow any product use instructions or warning labels; (2) the product or
any of its parts or accessories have been modied or altered; (3) there was a failure to perform normal
recommended maintenance; (4) the product is not properly registered, within 10 days of purchase; and (5)
the product is determined to be not an authentic Zero Trace™ product or it is determined to have, at any
time, been stolen, counterfeited or misappropriated from its rightful owner.
This is the sole and exclusive warranty and there are no warranties which extend beyond the description on
the face hereof. The implied warranties of merchantability and tness for a particular purpose are expressly
disclaimed. All disclaimers and limitations of liability apply even if the remedy fails of its essential purpose.
Except as may be prohibited by state law, Zero Trace™ assumes no liability for incidental, consequential, or
special damages or expenses of any kind.
The sole and exclusive remedy pursuant to this warranty is the repair, replacement or refund of the
defective product at our sole discretion.
TO OBTAIN SERVICE:Contact the consumer service department at (877) 414-9376 for a return
authorization number (RA#) prior to sending the unit. Write the RA# on the outside of the package along
with the words “Service Return.” Attach a note to the product containing your name, address, telephone
number and a description of the problem. Carefully package and return the product, transportation charges
prepaid, to the factory. Collect shipments will not be accepted. Shipments without an RA# issued and listed
on the outside of
the shipping box will not be accepted.
The warranties and guarantees contained herein are non-transferable and non-assignable. All warranties
and guarantees contained herein shall be null and void in the event the original purchaser sells, assigns or
conveys the product.
FCC STATEMENT
Product Name: Zero Trace™ Portable
Trade Name: Wildgame Innovations
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1) This
device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
WARNING Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
602 Fountain Parkway
Grand Prairie, TX 75050
(877) 414-9376
ZeroTraceIon.com
Table of contents
