PLANTA SIGMA 2021 EURO Programming manual

SIGMA 2021
EURO
Cellular Polycarbonate Greenhouse
p. 2-9
p. 11-47
Technical certicate
Assembling manual
4.02 m, 6.02 m, 8.02 m ..
158.2 in, 237 in, 315.7 in ..
3.0 m
118.1 in
2.1 m
82.7 in

3
2
Description
The greenhouse is intended to create a favorable microclimate for growing garden
crops in allotments and kitchen gardens.
The greenhouse is available in different lengths depending on the buyer’s choice.
The required length of the greenhouse is attained by buying additional packages with
extension inserts. Each insert lengthens the standard supply set of the greenhouse
by 78.7 in (2 m). The length of the standard supply set is 158.2 in (4.02 m). The
height of the installed frame of the greenhouse is 82. 7 in (2.1 m).
The frame of the greenhouse is made of galvanized steel pipes and profiles. It is
assembled with screws and nuts. The kit comprises everything needed for fixing the
glazing. The complete set of the greenhouse includes the glazing at the request of
the buyer.
Perform assembling and operation of the greenhouse in strict accordance with
the manual and operating rules stated in the technical certificate. Please keep
this technical certificate for further reference.
!
Operation rules
Before starting the operation, the greenhouse should be assembled and installed
according to the instruction. When installing the greenhouse by third parties, the
buyer should check the assembly quality for compliance with the instruction.
Do not install the greenhouse close to buildings and trees from which snow or ice
may fall. The distance of at least 78.7 in (2 m) is recommended.
The greenhouse is designed to withstand the wind speed no more than 24 m/s
(54 mph).
The maximum snow load for the framework occurs when the weight of a snow cover
is 160 kg per 1 m2 of the horizontal surface of the ground surface corresponding to
0.4 m packed snow layer. To increase the bearing capacity under the snow load of
the frame of the entire greenhouse up to 360 kg/m2, arch reinforcement should be
installed on each greenhouse arch, with the exception of the doorway arches (see
para.24). The dismantling of the arch reinforcement from the greenhouse frame after
the winter period is carried out using one bolted connection.
It is necessary to avoid exceeding the snow load on the greenhouse: either to
remove snow from the greenhouse after each snowfall, or remove the greenhouse
glazing for winter.
Warranty liabilities
Cleaning and washing sheets of polycarbonate
Term for making claims is 24 months from the day of purchase.
Warranty does not apply to cases of:
1. Greenhouse installation in violation of instruction requirements
2. Violation of the rules of operation.
3. Inappropriate use of the greenhouse.
4. Deformation of the greenhouse as a result of ground movement.
5. Floods, hurricanes and other natural disasters.
1. Rinse the sheet with warm water.
2. Wash the sheet with a solution of mild soap or with a household detergent and
warm water, using a soft rag or a sponge to remove dirt.
3. Rinse with cold water and wipe with a soft cloth.
Never use abrasives or highly alkaline cleaning compositions for cleaning
polycarbonate sheets. Dry rubbing of the surface will damage the protective layer of
the cladding and shorten its shelf life. Never rub the surface of polycarbonate sheets
with brushes, metallic cloth or other abrasive materials.
When disinfecting the greenhouse from pathogens causing fungal and bacterial
diseases, do not use «sulfur blocks» to avoid frame corrosion.
Production date
Technical certificate/GREENHOUSE «SIGMA 2021 EURO» Technical certificate/GREENHOUSE «SIGMA 2021 EURO»

5
4
GREENHOUSE BOX 1 BOX 2 BOX
EXTENSION
SIGMA
BASELINE MODEL
+ + -
EXTENSION FOR
GREENHOUSE 78.7 in (2m)
- - +
№ marking denomination length, in
(m) q-ty, pcs
810 Doorway tie 35.43 in
(0.9 m) 2
912 Door vertical element for hinges 58.26 in
(1.48 m) 2
10 12-1 Door vertical element 58.26 in
(1.48 m) 2
11 12-2 Window vertical element for hinges 14.17 in
(0.36 m) 2
12 12-3 Window vertical element 14.17 in
(0.36 m) 2
13 13-1 Door/window horizontal element 33.46 in
(0.85 m) 6
14 13 Door horizontal element medium 33.46 in
(0.85 m) 2
15 13-2 Window horizontal element 33.46 in
(0.85 m) 2
16 PK Profile 41.33 in
(1.05 m) 4
17 PProfile 39.37 in
(1.0 m) 4
18 У1 Door lining 29.52 in
(0.75 m) 2
19 У2 Door lining 29.52 in
(0.75 m) 2
20 У8 Door lining 29.52 in
(0.75 m) 2
21 У9 Door lining 29.52 in
(0.75 m) 2
22 У10 Window lining 16.14 in
(0.41 m) 2
23 У12 Window lining 16.14 in
(0.41 m) 2
24 У7 Window lining 33.46 in
(0.85 m) 4
25 O.2 Stand bottom 25х25 47.24 in
(1.2 m) 3
26 O.1 Stand 20х20 47.24 in
(1.2 m) 3
STANDARD SUPPLY SET
LIST OF PARTS FOR ASSEMBLY
BOX 1
№ marking denomination length, in
(m) q-ty, pcs
11Leg 12.99 in
(0.33 m) 10
21-2 End wall leg 10.23 in
(0.26 m) 4
32Purlin 38.58 in
(0.98 m) 28
48-2 End wall corrugated connecting bar 58.26 in
(1.48 m) 2
58-1 End wall connecting bar 58.26 in
(1.48 m) 2
69-2 Doorway post for hinges 78.74 in
(2.0 m) 2
79-1 Doorway post 78.74 in
(2.0 m) 2
4.02 m
158.2 in
2 m
78.7 in

7
6
№ marking denomination length, in
(m) q-ty, pcs
27 4Т End wall arch 59.05 in
(1.5 m) 4
28 4ВТ Upper end wall arch 74.8 in
(1.9 m) 2
29 4НТ Lower end wall arch right 74.8 in
(1.9 m) 2
30 4НТ-1 Lower end wall arch left 74.8 in
(1.9 m) 2
31 4В Upper arch 74.8 in
(1.9 m) 3
32 4Н Lower arch 74.8 in
(1.9 m) 6
33 3Support 5.51 in
(0.14 m) 14
34 -Inner clamp 21
35 -Outer clamp 21
36 -End wall clamp 14
37 -Bracket 3
38 -40x20 clamp 12
39 -40x20 clamp 12
40 -20x20 clamp 24
41 -20x20 angle clamp 32
42 -Hinge 8
43 -Handle kit 4
44 -Latch 4
45 -Stop bar 4
46 -Coupler 3
№denomination q-ty, pcs
47 M4x12 screw 56
48 М4х35 screw 48
49 М5х30 screw 34
50 М6х16 screw 40
51 М5х30 bolt 3
52 М6х60 bolt 10
53 4.8x19 self
drilling screw 290
54 32х4 washer 32
55 М4 nut 104
56 М5 nut 45
57 М6 nut 50
58 6 washer 20
59 10 washer 12
60 Self-tapping
screw 28
BOX 2

9
8
BOX EXTENSION
№ marking denomination q-ty, pcs
14В Upper arch 2
24Н Lower arch 4
31Leg 4
42Purlin 14
53Support 4
6-Inner clamp 14
7O.2 Stand bottom 25х25 2
8O.1 Stand 20х20 2
9-Bracket 2
10 -Coupler 2
11 -Outer clamp 14
12 -М4х12 screw 28
-М4х35 screw 24
-М5х30 bolt 2
-М6х60 bolt 4
-М4 nut 52
-М5 nut 2
-М6 nut 4
-32х4 washer 16
-4.8x19 self drilling screw 44
-6 washer 8
-Top metal fastening band 2
-Bottom metal fastening band 4
PProfile L-1000 mm 39.3 in 4
-Angle breacket 4
-Self-tapping screw 8
-Double-sided tape L=5 m 196.8 in 1
Sigma Polycarbonate Box 1/2
door
Sigma Polycarbonate Box
2/2 (Extension)
№denomination q-ty, pcs
61 Top metal fastening band 5
62 Bottom metal fastening band 10
63 Angle breacket 10
64 Door holder kit (hooks) 4
65 Adhesive tape 1
66 Double-sided tape L=10 m 393.7 in 1
small window
D
E
right end side
А
left end side
B
ridge panel
C
Gх6
1050 mm
41.3 in
1050 mm
41.3 in
Fх6
1050 mm
41.3 in
1990 mm
78.3 in
х2 х2 х2
х2 х2
1990 mm
78.3 in
1000 mm
39.3 in
900 mm
35.4 in
222 mm
8.7 in
365 mm
14.3 in
895 mm
35.2 in
2045 mm
80.5 in
2045 mm
80.5 in
895 mm
35.2 in
1500 mm
59 in

11
10
If the greenhouse is mounted on a foundation (see para.7.2), the parts 1 and 3
are not assembled and are not mounted in the subsequent assembly.
3
1
3
1
№1 from
«box 1 SIGMA»
1 pc.
1
«box 2 SIGMA»
2 pc.
4.8х19
№62 from
«box 2 SIGMA»
1 pc.
3
1-2
3
1-2
х4
1.1 1.2
«box 2 SIGMA»
2 pc.
4.8х19
№33 from
«box 2 SIGMA»
1 pc.
3
№2 from
«box 1 SIGMA»
1 pc.
1-2
№33 from
«box 2 SIGMA»
1 pc.
3
х10

13
12
х2
4ВТ
4НТ
4НТ-1
11
1
8-2 8-1
8-1
№38 from
«box 2 SIGMA»
1 pc.
1
8-2
4НТ
8-1
1
4НТ-1
4НТ-1
Inner side of the end wall. Pre-Drilled
pin holes are on the backside and will be facing the
polycarbonate panels.
№39 from
«box 2 SIGMA»
1 pc.
№39 from
«box 2 SIGMA»
1 pc.
8-2
8-1
№28 from
«box 2 SIGMA»
1 pc.
4ВТ
№29 from
«box 2 SIGMA»
1 pc.
4НТ
№30 from
«box 2 SIGMA»
1 pc.
4НТ-1
from «box 2 SIGMA»
М6х16 М6
1 pc.
from «box 2 SIGMA»
2 pc.
М5х30 М5
№4 from
«box 1 SIGMA»
1 pc.
8-2
№5 from
«box 1 SIGMA»
1 шт.
8-1
4ВТ
4НТ
4НТ-1
4ВТ
4НТ
4НТ-1 !
80 mm
№38 from
«box 2 SIGMA»
1 pc.
8-2
1
4НТ
from «box 2 SIGMA»
М6х16 М6
1 pc.
«box 2 SIGMA»
1 pc.
4.8х19
«box 2 SIGMA»
1 pc.
4.8х19
2.1
See step1.2 See step1.2

15
14
х2
10
4ВТ
8-2 8-1
9-2
9-1
9-1
9-2
10
10
4НТ-1
4НТ
11
№40 from
«box 2 SIGMA»
2 pc. №40 from
«box 2 SIGMA»
2 pc.
№45 from
«box 2 SIGMA»
1 pc.
4ВТ
9-2
4ВТ
9-1
«box 2 SIGMA»
М6х16 М6
1 pc.
№6 from
«box 1 SIGMA»
1 pc.
9-2
№7 from
«box 1 SIGMA»
1 pc.
9-1
№8 from
«box 1 SIGMA»
1 pc.
10
10
9-1
10
9-2
2.2
«box 2 SIGMA»
1 pc.
4.8х19
«box 2 SIGMA»
1 pc.
4.8х19
«box 2 SIGMA»
М6х16 М6
1 pc.
«box 2 SIGMA»
1 pc.
4.8х19
«box 2 SIGMA»
3 pc.
4.8х19

17
16
х2
4НТ-1
4НТ
4ВТ
4Т
4НТ
4Т
4Т
4Т
4НТ-1
10
9-1
9-2
8-1
8-2
11
8-2
9-2
4Т
8-1
9-1
4Т
1-2 1-2
4Т
9-2
8-2
1-2
4Т
9-1
8-1
1-2
1-2
1-2
№38 from
«box 2 SIGMA»
1 pc.
№38 from
«box 2 SIGMA»
1 pc.
№39 from
«box 2 SIGMA»
1 pc.
№38 from
«box 2 SIGMA»
1 pc. №47 from
«box 2 SIGMA»
1 pc.
№38 from
«box 2 SIGMA»
1 pc.
№39 from
«box 2 SIGMA»
1 pc.
№39 from
«box 2 SIGMA»
1 pc.
№40 from «box 2 SIGMA»
Only used when installed
directly on the ground
2 pc.
№39 from
«box 2 SIGMA»
1 pc.
№27 from
«box 2 SIGMA»
2 pc.
4Т
2.3
«box 2 SIGMA»
М6х16 М6
1 pc.
«box 2 SIGMA»
М6х16 М6
1 pc.
«box 2 SIGMA»
4 pc.
4.8х19
«box 2 SIGMA»
М6х16 М6
2 pc.
«box 2 SIGMA»
4 pc.
4.8х19
See step1.1 See step1.1
№40 from «box 2
SIGMA»
Only used when
installed directly on the
ground
2 pc.

19
18
х2
2.4
4ВТ
4НТ-1
4НТ
8-2
8-2
8-2
4НТ-1
4ВТ
4НТ-1
4ВТ
4НТ-1
«box 2 SIGMA»
1 pc.
4.8х19
4НТ-1
4НТ-1
4НТ-1
№36 from
«box 2 SIGMA»
1 pc.
4ВТ
№36 from
«box 2 SIGMA»
1 pc.
«box 2 SIGMA»
1 pc.
4.8х19

21
20
А
А
3.1
«box 2 SIGMA»
18 pc.
4.8х19
х2
А
B
B
С
С
3.2
«box 2 SIGMA»
10 pc.
4.8х19
«box 2 SIGMA»
5 pc.
4.8х19
«box 2 SIGMA»
9 pc.
4.8х19
remove the rubber washer
UV protected side

23
22
4Н
1
4Н
№31 from
«box 2 SIGMA»
1 pc.
4В
№32 from
«box 2 SIGMA»
2 pc.
4Н
4В
4Н
4В
4Н
!
80 mm
4.1
«box 2 SIGMA»
1 pc.
4.8х19
1
4В
4Н
4Н
«box 2 SIGMA»
1 pc.
4.8х19
See step1.2 See step1.2

25
24
1
4Н
4В
4Н
4В
4В
4Н
№34 from
«box 2 SIGMA»
1 pc.
№34 from
«box 2 SIGMA»
1 pc.
№34 from
«box 2 SIGMA»
1 pc.
4.2
«box 2 SIGMA»
1 pc.
4.8х19
«box 2 SIGMA»
1 pc.
4.8х19
«box 2 SIGMA»
1 pc.
4.8х19
1
4Н
4В
4Н
4Н
№34 from
«box 2 SIGMA»
1 pc.
№34 from
«box 2 SIGMA»
1 pc.
«box 2 SIGMA»
1 pc.
4.8х19
«box 2 SIGMA»
1 pc.
4.8х19

27
26
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4ВТ
4НТ
№3 from
«box 1 SIGMA»
7 pc.
2
from «box 2 SIGMA»
М4х12 М4
1 pc.
5.1
2
2
2
2
2
2
2
2
4В
4Н
4Н
4В
4Н
4В
4Н
4Н
№35 from
«box 2 SIGMA»
1 pc.
5.2
from «box 2 SIGMA»
М4х12 М4
1 pc.
If the greenhouse is purchased with Roof Ventilation Window please refer to
the Sigma Window Installation Manual to install the window hinges and extra
perlin 2

29
28
2
2
4В
4Н
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4В
4Н
4Н
4Н
4Н
4В
№35 from
«box 2 SIGMA»
1 pc.
№3 from
«box 1 SIGMA»
7 pc.
2
5.3
«box 2 SIGMA»
М4х12 М4
1 pc.
2
4ВТ
4НТ
5.4
from «box 2 SIGMA»
М4х12 М4
1 pc.
LENGTHENING OF THE BASE WITH THE INSERT
№4 from
«box EXTENSION SIGMA»
14 pc.
2
№1 from
«box EXTENSION SIGMA»
2 pc.
4В
№2 from
«box EXTENSION SIGMA»
4 pc.
4Н
6
6 m
236.2 in
2 m
78.7 in

31
30
L1
L2
L1=L2
!
7.1
MOUNTING ON THE FOUNDATION
L1
L2
L1=L2
!
7.2
№60 from
«box 2 SIGMA»
2 pc.
№63 from
«box 2 SIGMA»
1 pc.
158.27 in
4020 mm
39.37 in
1000 mm
35.43 in
900 mm
118.11 in
3000 mm
39.37 in
1000 mm
0.79 in
20 mm
1.57 in
40 mm
«box 2 SIGMA»
2 pc.
4.8х19
№60 from
«box 2 SIGMA»
1 pc.

33
32
Inner side of the window.
Pre-Drilled pin holes are on the backside and will be facing the polycarbonate
panels.
Outer side of the window:
№13 from
«box 1 SIGMA»
1 pc.
13-1
№12 from
«box 1 SIGMA»
1 pc.
12-3
№11 from
«box 1 SIGMA»
1 pc.
12-2
№15 from
«box 1 SIGMA»
1 pc.
13-2
13-2
13-1
12-2
12-3/12-2
13-1/13-2
13-2
13-1
12-2
12-3
from «box 2 SIGMA»
1 pc.
М6х16 М6
№41 from
«box 2 SIGMA»
2 pc.
8.1
8.2
У7
У7
У12
У10
х2
12-2
13-2
13-1
12-2
D
№42 from
«box 2 SIGMA»
1 pc.
№42 from
«box 2 SIGMA»
1 pc.
«box 2 SIGMA»
2 pc.
М5х30 М5
«box 2 SIGMA»
2 pc.
М5х30 М5
from «box 2 SIGMA»
14 pc.
4.8х19
У7
№24 from
«box 1 SIGMA»
2 pc.
У10
№22 from
«box 1 SIGMA»
1 pc.
У12
№23 from
«box 1 SIGMA»
1 pc.
8.3
13-2
12-2
12-3
13-1
UV protected side

35
34
13-1
13-1
13
12-1
12
13-1
12
13
12
9.1
Inner side of the door. Pre-Drilled pin holes are on the backside
and will be facing the polycarbonate panels.
№13 from
«box 1 SIGMA»
2 pc.
13-1
№9 from
«box 1 SIGMA»
1 pc.
12
№10 from
«box 1 SIGMA»
1 pc.
12-1
№14 from
«box 1 SIGMA»
1 pc.
13
«box 2 SIGMA»
1 pc.
М6х16 М6
«box 2 SIGMA»
1 pc.
М6х16 М6
№41 from
«box 2 SIGMA»
2 pc.
№40 from
«box 2 SIGMA»
2 pc.
«box 2 SIGMA»
1 pc.
4.8х19
12
13-1
13-1
13
12-1
12
13-1
9.2
Outer side of the door:
from «box 2 SIGMA»
2 pc.
М5х30 М5
№42 from
«box 2 SIGMA»
1 pc.
13
13-1
13-1
12
12-1

37
36
9.3
E
У1
У2
У8
У9
У8
№20 from
«box 1 SIGMA»
1 pc.
У1
№18 from
«box 1 SIGMA»
1 pc.
У2
№19 from
«box 1 SIGMA»
1 pc.
У9
№21 from
«box 1 SIGMA»
1 pc.
«box 2 SIGMA»
27 pc.
4.8х19
E
У9
х2
UV protected side

39
38
9-2
12/12-2
10
х2
11
«box 2 SIGMA»
2 pc.
М5х30 М5
«box 2 SIGMA»
2 pc.
4.8х19
«box 2 SIGMA»
2 pc.
4.8х19
№64 from
«box 2 SIGMA»
1 pc.
05
№44 from
«box 2 SIGMA»
1 pc.
№43 from
«box 2 SIGMA»
1 pc.
№64 from
«box 2 SIGMA»
1 pc.
№64 from
«box 2 SIGMA»
1 pc.
Outer side of the end wall: The door and the window
are secured in «Opened» position.
№59 from
«box 2 SIGMA»
3 pc.
№44 from
«box 2 SIGMA»
1 pc.
№59 from
«box 2 SIGMA»
3 pc.
№43 from
«box 2 SIGMA»
1 pc.