VOLYA Sigma 2021 Euro Programming manual

SIGMA 2021
EURO
Cellular polycarbonate greenhouse
p. 2-9
p. 11-43
Technical certicate
Assembling manual
3 m 4 m
2,1 m
Quality management system (QMS)
of LLC «Volya» is certied
for compliance with
standard of
ISO 9001:2008
Certied by
Russian Registry

3
2
Description
The greenhouse is intended to create a favorable microclimate for growing garden
crops in allotments and kitchen gardens.
The greenhouse is available in different lengths depending on the buyer’s choice.
The required length of the greenhouse is attained by buying additional packages with
extension inserts. Each insert lengthens the standard supply set of the greenhouse
by 2 m. The length of the standard supply set is 4 m. The height of the installed frame
of the greenhouse is 2.1 m.
The frame of the greenhouse is made of galvanized steel pipes and profiles. It is
assembled with screws and nuts. The kit comprises everything needed for fixing the
glazing. The complete set of the greenhouse includes the glazing at the request of
the buyer.
Perform assembling and operation of the greenhouse in strict accordance with
the manual and operating rules stated in the technical certificate. Please keep
this technical certificate for further reference.
!
Operation rules
Before starting the operation, the greenhouse should be assembled and installed
according to the instruction. When installing the greenhouse by third parties, the
buyer should check the assembly quality for compliance with the instruction.
Do not install the greenhouse close to buildings and trees from which snow or ice
may fall. The distance of at least 2 m is recommended.
The greenhouse is designed to withstand the wind speed no more than 24 m/s.
The maximum snow load for the framework occurs when the weight of a snow cover
is 160 kg per 1 m2 of the horizontal surface of the ground surface corresponding to
0.4 m packed snow layer.
It is necessary to avoid exceeding the snow load on the greenhouse: either to
remove snow from the greenhouse after each snowfall, or remove the greenhouse
glazing for winter.
Warranty liabilities
Cleaning and washing sheets of polycarbonate
Term for making claims is 24 months from the day of purchase
Warranty does not apply to cases of:
1. Greenhouse installation in violation of instruction requirements
2. Violation of the rules of operation.
3. Inappropriate use of the greenhouse.
4. Deformation of the greenhouse as a result of ground movement.
5. Floods, hurricanes and other natural disasters.
1. Rinse the sheet with warm water.
2. Wash the sheet with a solution of mild soap or with a household detergent and
warm water, using a soft rag or a sponge to remove dirt.
3. Rinse with cold water and wipe with a soft cloth.
Never use abrasives or highly alkaline cleaning compositions for cleaning
polycarbonate sheets. Dry rubbing of the surface will damage the protective layer of the
cladding and shorten its shelf life. Never rub the surface of polycarbonate sheets with
brushes, metallic cloth or other abrasive materials.
When disinfecting the greenhouse from pathogens causing fungal and bacterial
diseases, do not use «sulfur blocks» to avoid frame corrosion (blackening).
Production date
Technical certificate/GREENHOUSE «SIGMA 2021 EURO» Technical certificate/GREENHOUSE «SIGMA 2021 EURO»
Manufacturing facility: LLC “Volya”
141983, Dubna, Moscow region, Severnyi per., 8.
The manufacturer is responsible for the quality of products in accordance with the RF Civil Code.
The company reserves the right to make changes in the greenhouse design

5
4
GREENHOUSE BOX 1 BOX 2 BOX
EXTENTION
SIGMA 3 m х 4 m
BASELINE MODEL
+ + -
EXTENTION FOR
GREENHOUSE 2m
- - +
№ marking denomination q-ty, pcs
11Leg 10
21-2 End wall leg 4
32Purlin 28
48-2 End wall corrugated connecting bar 2
58-1 End wall connecting bar 2
69-2 Doorway post for hinges 2
79-1 Doorway post 2
810 Doorway tie 2
912 Door vertical element for hinges 2
10 12-1 Door vertical element 2
11 12-2 Window vertical element for hinges 2
12 12-3 Window vertical element 2
13 13-1 Door/window horizontal element 6
14 13 Door horizontal element medium 2
15 13-2 Window horizontal element 2
16 -Profile
L=1050 mm 4
17 -Profile
L=1000 mm 4
STANDARD SUPPLY SET
LIST OF PARTS FOR ASSEMBLY
BOX 1

7
6
№ marking denomination q-ty, pcs
25 4Т End wall arch 4
26 4ВТ Upper end wall arch 2
27 4НТ Lower end wall arch right 2
28 4НТ-1 Lower end wall arch left 2
29 4В Upper arch 3
30 4Н Lower arch 6
31 -Inner clamp 21
32 -Outer clamp 21
33 -End wall clamp 14
№ marking denomination q-ty, pcs
34 -40x20 clamp 12
35 -40x20 clamp 12
36 -20x20 clamp 24
37 -20x20 angle clamp 32
38 -Hinge 8
39 -Handle kit 4
40 3Support 14
41 -Handle bushing 4
42 -Latch 4
43 -Stop bar 4
44 -Door holder kit (hooks) 4
45 -Washer 10 4
46 -Adhesive tape 1
47 -Double-sided tape L=10 m 1
48 -M4x12 screw 56
49 -М4х25 screw 16
50 -М4х35 screw 16
51 -М5х30 screw 36
52 -М6х16 screw 40
53 -М6х60 bolt 10
№ marking denomination q-ty, pcs
18 У1 Door lining 2
19 У2 Door lining 2
20 У8 Door lining 2
21 У9 Door lining 2
22 У10 Window lining 2
23 У12 Window lining 2
24 У7 Window lining 4
BOX 2

9
8
54 -4.8x19 self drilling screw 290
55 -4.8x11 sharp-tipped screw 4
56 -32х4 washer 16
57 -М4 nut 88
58 -М5 nut 40
59 -М6 nut 50
60 -6 washer 20
61 5 washer 168
62 -Top metal fastening band 5
63 -Bottom metal fastening band 10
BOX EXTENTION
№ marking denomination q-ty, pcs
64 4В Upper arch 2
65 4Н Lower arch 4
66 1Leg 4
67 2Purlin 14
68 3Support 4
69 -Inner clamp 14
70 -Outer clamp 14
71 -М4х12 screw 28
72 -М4х25 screw 8
73 -М4х35 screw 8
74 -М6х60 bolt 4
75 -М4 nut 44
76 -М6 nut 4
77 - 32х4 washer 8
78 -4.8x19 self drilling screw 26
79 -6 washer 8
80 -Top metal fastening band 2
81 -Bottom metal fastening band 4
82 -Profile L-1000 mm 4
83 -Double-sided tape L=5 m 1
Sigma EURO polycarbonate walls
right end
side
2045
1050
1500
905
door
2 pcs.
left end
side
2045
1050
2 pcs.
2000
1050
base roof and
side walls
6 pcs.
385
905
small window
2 pcs.
2 pcs.
ridge panel-2 pcs.
900
222
2000
1000
base roof and
side walls
6 pcs.
2000
1000
Extension roof
and side walls
6 pcs.
Sigma EURO polycarbonate walls

11
10
р.12-13 р.14-15 р.16-17
р.18-19 р.20-21 р.22 р.22-23
р.24-27 р.28-29 р.30-31 р.32
р.33 р.34 р.35 р.35
р.37 р.38-39 р.40
р.11
р.42
р.41 р.43
р.36
1If the greenhouse is mounted on a foundation (see para.22), the elements 1 and 3
are not assembled and are not mounted in the subsequent assembly.
3
3
1
1-2
№1 from
«box 1 SIGMA»
1 pc.
№40 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
2 pc.
№2 from
«box 1 SIGMA»
1 pc.
1 2 3 4
5 6 7 8
910 11 12
13 14 15 16
17 18 19 20
21 22 23
№63 from
«box 2 SIGMA»
1 pc.
3
1-2
3
1
№54 from
«box 2 SIGMA»
2 pc.

13
12
2
х2
13-2
13-1
12-2
12-3
12-2
13-2
13-2
13-1
12-2
12-3
12-3/12-2
13-1/13-2
№13 from
«box 1 SIGMA»
1 pc.
№12 from
«box 1 SIGMA»
1 pc.
№15 from
«box 1 SIGMA»
1 pc.
№11 from
«box 1 SIGMA»
1 pc.
№52 from
«box 2 SIGMA»
1 pc.
№37 from
«box 2 SIGMA»
2 pc.
№59 from
«box 2 SIGMA»
1 pc.
№38 from
«box 2 SIGMA»
1 pc.
№51 from
«box 2 SIGMA»
2 pc.
№58 from
«box 2 SIGMA»
2 pc.
Inner side of the window.
Perforation on the elements from the backside: Outer side of the window:

15
14
х2
12
13-1
13-1
13
12-1
12
Outer side of the door:
№51 from
«box 2 SIGMA»
2 pc. №38 from
«box 2 SIGMA»
1 pc.
№58 from
«box 2 SIGMA»
2 pc.
3
13-1
13-1
13
12-1
12
13-1
12
13
12
№14 from
«box 1 SIGMA»
1 pc.
№13 from
«box 1 SIGMA»
2 pc.
№9 from
«box 1 SIGMA»
1 pc.
№36 from
«box 2 SIGMA»
2 pc.
Inner side of the door. Perforation on the elements from the backside:
№10 from
«box 1 SIGMA»
1 pc.
№52 from
«box 2 SIGMA»
1 pc.
№37 from
«box 2 SIGMA»
2 pc.
№59 from
«box 2 SIGMA»
1 pc.
№53 from
«box 2 SIGMA»
1 pc.
№52 from
«box 2 SIGMA»
1 pc.
№59 from
«box 2 SIGMA»
1 pc.

17
16
4
х2
4ВТ
4НТ
4ВТ
4ВТ
4НТ-1
11
11
8-2 8-1
8-2
1
8-1
1
8-2
8-1
№27 from
«box 2 SIGMA»
1 pc.
№26 from
«box 2 SIGMA»
1 pc.
№5 from
«box 1 SIGMA»
1 шт.
№4 from
«box 1 SIGMA»
1 pc.
№59 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
1 pc.
№35 from
«box 2 SIGMA»
1 pc.
№35 from
«box 2 SIGMA»
1 pc.
4НТ-1
4НТ
4НТ
4НТ
4НТ-1
4НТ-1
№28 from
«box 2 SIGMA»
1 pc.
Inner side of the end wall.
Perforation on the elements from the backside:
№34 from
«box 2 SIGMA»
1 pc.
№52 from
«box 2 SIGMA»
1 pc.
№52 from
«box 2 SIGMA»
1 pc.
№34 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
1 pc.
№59 from
«box 2 SIGMA»
1 pc.
8-2
8-1
№51 from
«box 2 SIGMA»
1 pc.
№58 from
«box 2 SIGMA»
1 pc.

19
18
5
х2
10
4ВТ
8-2 8-1
9-2
9-1
9-1
10
9-1
9-2
10
10
9-2
10
4НТ-1
4НТ
11
4ВТ
9-1
4ВТ
9-2
№6 from
«box 1 SIGMA»
1 pc.
№7 from
«box 1 SIGMA»
1 pc.
№8 from
«box 1 SIGMA»
1 pc.
№52 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
1 pc.
№59 from
«box 2 SIGMA»
1 pc.
№36 from
«box 2 SIGMA»
2 pc.
№55 from
«box 2 SIGMA»
1 pc.
№36 from
«box 2 SIGMA»
2 pc.
№52 from
«box 2 SIGMA»
1 pc.
№59 from
«box 2 SIGMA»
1 pc.
№43 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
3 pc.
№55 from
«box 2 SIGMA»
1 pc.
Inner side

21
20
6
х2
4НТ-1
4НТ
4ВТ
4Т
4НТ
4Т
4Т
4Т
4НТ-1
10
9-1
9-2
8-1
8-2
11
8-2
9-2
4Т
8-1
9-1
4Т
1-2 1-2
4Т
9-2
8-2
1-2
4Т
9-1
8-1
1-2
1-2 1-2
№25 from
«box 2 SIGMA»
1 pc.
№25 from
«box 2 SIGMA»
1 pc.
№34 from
«box 2 SIGMA»
1 pc.
№35 from
«box 2 SIGMA»
1 pc.
№59 from
«box 2 SIGMA»
2 pc.
№35 from
«box 2 SIGMA»
1 pc.
№35 from
«box 2 SIGMA»
1 pc.
№35 from
«box 2 SIGMA»
2 pc.
№35 from
«box 2 SIGMA»
1 pc.
№59 from
«box 2 SIGMA»
2 pc. №43 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
3 pc.
№34 from
«box 2 SIGMA»
1 pc.
№35 from
«box 2 SIGMA»
1 pc.
№52 from
«box 2 SIGMA»
2 pc.
№54 from
«box 2 SIGMA»
3 pc.
№52 from
«box 2 SIGMA»
2 pc.
№34 from
«box 2 SIGMA»
1 pc.
№59 from
«box 2 SIGMA»
1 pc.
№52 from
«box 2 SIGMA»
1 pc.
№52 from
«box 2 SIGMA»
1 pc.
№59 from
«box 2 SIGMA»
1 pc.
Inner side
№36 from
«box 2 SIGMA»
2 pc.

23
22
х2
9-2 12/
12-2
№51 from
«box 2 SIGMA»
2 pc.
№58 from
«box 2 SIGMA»
2 pc.
8
9-2
9-1
4ВТ
4НТ-1 4НТ
4Т 4Т
1-2
1-2 1
1
10
8-1 8-2
7
8-2/8-1
1
4ВТ
8-2/8-1
8-2/8-1
4ВТ
4ВТ
4НТ/
4НТ-1
№33 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
1 pc.
№33 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
1 pc.
4НТ/
4НТ-1
4НТ/
4НТ-1
4НТ/
4НТ-1
4НТ/
4НТ-1
4НТ/
4НТ-1
1
1
4ВТ
4НТ
4НТ-1
4Т 4Т
1-2
1-2 1
18-1 8-2
х2
Outer side
Outer side

25
24
9
15 mm
10 mm
10 mm
In case the decorative steel lining (seal) from the additional kit is installed on
the doors and windows see para.23
№61 from
«box 2 SIGMA»
18 pc.
№54 from
«box 2 SIGMA»
14 pc.
№61 from
«box 2 SIGMA»
14 pc.
№54 from
«box 2 SIGMA»
18 pc.
50 мм
18 мм


27
26
In case the decorative steel lining (seal) from the additional kit is installed on
the doors and windows see para.23
№54 from
«box 2 SIGMA»
29 pc.
№54 from
«box 2 SIGMA»
19 pc.
№61 from
«box 2 SIGMA»
19 pc
№61 from
«box 2 SIGMA»
29 pc.
№61 from
«box 2 SIGMA»
5 pc
№54 from
«box 2 SIGMA»
5 pc.

29
28
10
1
4В
4Н
4Н
4Н
4В 4В
4Н 4Н
№29 from
«box 2 SIGMA»
1 pc.
№30 from
«box 2 SIGMA»
1 pc.
№30 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
1 pc.
1
4Н
№54 from
«box 2 SIGMA»
1 pc.

31
30
11
11
4Н 4Н
4В
4Н
4В
4В
4В
4Н
4Н
4Н
№54 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
1 pc.
№31 from
«box 2 SIGMA»
1 pc.
№31 from
«box 2 SIGMA»
1 pc.
№31 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
1 pc.
№31 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
1 pc.
№31 from
«box 2 SIGMA»
1 pc.

33
32
12
2
2
13
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4ВТ/
4НТ
2
2
2
2
2
2
2
4В
4Н
4Н
4В/
4Н
4В
4Н
4Н
№48 from
«box 2 SIGMA»
1 pc.
№57 from
«box 2 SIGMA»
1 pc.
№32 from
«box 2 SIGMA»
1 pc.
№3 from
«box 1 SIGMA»
7 pc.
№48 from
«box 2 SIGMA»
1 pc.
№57 from
«box 2 SIGMA»
1 pc.

35
34
14 15
2
2
2
2
2
L1
L2
L1=L2
!
16
2
2
2
2
2
4В/
4Н
2
2
2
2
2
2
2
4ВТ/
4НТ
4В
4Н
4Н
4Н
4Н
4В
№3 from
«box 1 SIGMA»
7 pc.
№57 from
«box 2 SIGMA»
1pc.
№48 from
«box 2 SIGMA»
1 pc.
№32 from
«box 2 SIGMA»
1 pc.
№48 from
«box 2 SIGMA»
1 pc.
№57 from
«box 2 SIGMA»
1 pc.

37
36
18
х2
05
17 LENGTHENING OF THE BASE WITH THE INSERT
2000
№64 from
«box extention SIGMA»
2 pc.
№65 from
«box extention SIGMA»
4 pc.
№39 from
«box 2 SIGMA»
1 pc.
№44 from
«box 2 SIGMA»
1 pc.
№41,№42,№45 from
«box 2 SIGMA»
1 pc.
№44 from
«box 2 SIGMA»
1 pc.
№67 from
«box extention SIGMA»
14 pc.
№41,№42,№45 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
2 pc.
№39 from
«box 2 SIGMA»
1 pc.
№44 from
«box 2 SIGMA»
1 pc.
№54 from
«box 2 SIGMA»
2 pc.

39
38
19
The arrow on the details
is directed to the front
side greenhouse
1050
№47 from
«box 2 SIGMA»
2 pc х 1,05 m
1050
!
do not fully tighten!
№46 from
«box 2 SIGMA»
!
tighten!
№56 from
«box 2 SIGMA»
1 pc.
№50 from
«box 2 SIGMA»
1 pc.
№16 from
«box 1 SIGMA»
2 pc.
Cellular polycarbonate panels are installed with a certain surface, which has
a protective layer, outside (towards the sun). The protective layer usually has a
side with the inscriptions on the transportation film. The other side of the film is
transparent. Mark the protective side of the sheet in each panel because after
removing the transportation film, the sides of the panel do not visually differ.
The transportation film should be removed from both surfaces before fixing the
glazing on the frame.
It is necessary to stick the
adhesive tape over the open
polycarbonate shearing surfaces
№46 from
«box 2 SIGMA»
№49 from
«box 2 SIGMA»
4 pc.
№57 from
«box 2 SIGMA»
4 pc.