Plas-Ties TTP TWIST-TIE User manual

TTP MSDS FOR INKJET CARTRIDGES
4052 BLACK (RED GREEN BLUE) - FOR POROUS SURFACES
This ink is made expressly for use with Inkjet printers manufactured by PLAS-TIES, CO.. For best
results, please follow the instructions contained in the manual provided with the printer.
HEALTH 1
FLAMMABILITY 1
REACTIVITY 0
PERSONAL PROTECTION B
Reorder Part No. 4052BK or 4052RD or 4052GR or 4052BL
Distributed by:
PLAS-TIES, CO.
14272 CHAMBERS RD
TUSTIN, CA 92780
RISK PHRASE(S)
Large doses irratating to eyes and respiratory system. Ingestion may cause acute gastro-intestinal upset.
PRECAUTIONARY MEASURES
Wear safety glasses. Use solvent-resistant gloves and vapor respirator for spills, leaks or other high
exposures.
FIRST AID MEASURES
INHALATION: REMOVE TO FRESH AIR.
EYE CONTACT: CONTACT WITH THE EYES MAY CAUSE MILD IRRITATION. IMMEDIATELY
FLUSH WITH LARGE AMOUNTS OF CLEAN, LUKEWARM WATER (LOW
PRESSURE) FOR AT LEAST 15 MINUTES. SEEK MEDICAL ATTENTION IF EYE
IRRITATION PERSISTS.
SKIN CONTACT: WASH AFFECTED AREAS THOROUGHLY WITH SOAP AND WATER.
CLOTHING SHOULD BE LAUNDERED BEFORE REUSE. SEEK MEDICAL
ATTENTION IF SKIN IRRITATION PERSISTS.
INGESTION: INGESTION OF INK MAY CAUSE STOMACH UPSET. SEEK MEDICAL
ADVICE. SEEK MEDICAL ATTENTION IF STOMACH UPSET PERSISTS (THIS
INK CONTAINS ETHYLENE GLYCOL).
Guarantee Exclusion and Limitation of Liability: For a period of one year from the date of manufacture,
PLAS-TIES, CO.
(“Seller”) warrants that the ink shipped shall conform to Seller’s specifications.
EXCEPT FOR THIS WARRANTY, SELLER MAKES NO WARRANTY OF ANY KIND, INCLUDING
THE WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. On any
claim accepted by the Seller, SELLER’S LIABILITY SHALL NOT EXCEED ITS OBLIGATION TO
REPLACE THE ALLEGEDLY DEFECTIVE INK, OR TO RETURN THE PURCHASE PRICE PAID
BY THE PURCHASER FOR ALLEGEDLY DEFECTIVE INK. IN NO EVENT SHALL SELLER BE
LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL OR SPECIFIC DAMAGES,
WHETHER IN TORT OR CONTRACT OR ANY THEORY OF LAW.
i
TTP PRINTING SYSTEM MANUAL

TWIST-TIE PRINTER (TTP) CONTROLLER
PRINT HEAD
CABLE PLUGS
IN HERE
ACCESSORY PLUG FOR
PRODUCT DETECT AND
ENCODER INPUT
TTP
CONTROLLER
KEYBOARD
POWER
SWITCH
WSYWIG LCD
GRAPHICS
DIAPLAY
INPUT POWER
110 VAC 60HZ
REFER TO USER
MANUAL FOR 220VAC
SETTINGS
SYSTEM
INK JET
TWISTTIE
STOPPED
- - - - > SPEED- 60
E  F DELAY- 40
TWIST TIE PRINTER
ii TTP Printing System Manual

TTP TWIST-TIE INK JET PRINTING SYSTEM
INSTALLATION AND OPERATION MANUAL
TABLE OF CONTENTS
PART 1 Installation Procedures 1-1
PART 2 Operation Procedures 2-1
PART 3 Maintenance Procedures 3-1
PART 4 Troubleshooting and Repairs 4-1
PART 5 Parts List 5-1
iii TTP Printing System Manual

AMENDMENT RECORD
Amendment Date
All Pages at First Issue 19 SEPT 2003
iv TTP Printing System Manual