
HOLSTER CASE
QUICK SETUP GUIDE
Before using your new product,
please read these instructions to prevent any damage.
INSTALL THE CASE
1Press down on the arrow while pulling the case apart.
2Slide your phone into the top case (A), then slide the bottom
case on until it clicks into place (B).
ATTACH THE HOLSTER
1Insert your phone into the bottom of the holster (A),
then push the top of the phone into the holster until it
snaps into place (B).
TIP: Insert your phone screen in for better protection.
2Rotate the clip (if needed), then squeeze the top of the
clip to open it and attach it to your belt or bag.
A
B
AB
Final at size : 190.5 x 133.35 mm
Final fold size : 63.5 x 133.35 mm
generic Platinum holster case_15-0498_QSG_V1_EN.ai 1 5/27/2015 11:33:46 AMgeneric Platinum holster case_15-0498_QSG_V1_EN.ai 1 5/27/2015 11:33:46 AM