2Install the bracket on the top of a light stand.
OR
Install the adapter on a tripod or stand, then
install the bracket on the adapter as shown
(required on most stands or tripods).
3Tighten the locking screw to secure the bracket.
4Place a photo ash in the cold shoe ash mount
on the top of the bracket. Tighten the thumb
screw lock to secure it.
V1 ENGLISH 19-0670
Stud adapter
5Insert the base of an umbrella into the umbrella
socket, then tighten the screw lock to secure it.
Point the ash at the center of the umbrella.
6Loosen the tension screw, adjust the tilt, then
tighten the screw to secure the bracket. Aim the
umbrella bracket for the best lighting.
SPECIFICATIONS
• Dimensions (H × W × D): 3.4 × 1.5 × 4.1 in.
(8.7 × 3.9 × 10.5 cm)
• Net weight: .37 lbs. (.17 kg)
Cold shoe ash mount
Thumb screw lock
Screw lock
ONE-YEAR LIMITED WARRANTY
CONTACT PLATINUM
For customer service, call 1-800-499-3964.
PLATINUM is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.
