Playlearn Bubble Tub User manual

Hello!
I am your new Bubble Tube
USER MANUAL

CONTENTS
1
2
Lid Top
chrome strip
3Inner Tube
6Translucent beads
72 brackets
4Outter Tube
(attached to tube)
8Maintenance Hose
(manual pump and water pipe)
For emptying and changing water -
not needed for setup
Make sure we’re all in your box
Also in box:
5Remote
2
Adapter
9

DISTILLED WATER / REGULAR WATER
Although this product has been designed to work
well with tap water, the product will need higher
maintenance due to algae and the water becoming
cloudy. The water will need changing approximately
once every few months. By using distilled water, the
water and product will stay clean for longer.
Inspect the Bubble Tube to make sure that there are no cracks
or damage. Please also inspect the inner tube to make sure it
did not get damaged in transit.
Take off lid and remove protective foam
from inside the top chrome strip.
If the Bubble tube has protective wrapping, remove by hand. Do not
remove with a knife, razor or any sharp object as this will damage
the tube.
Take extreme caution when handling as the Bubble Tube is a
fragile product.
Place the Bubble Tube in the location you will want it to stand.
The Bubble Tube should not be moved when it is full.
Fill the Bubble Tube with water till halfway through the top chrome
strip. The water needs to be an inch above the inner tube for the
fish to circulate.
WATER
the simple
joys in life
BRING A FRIEND ALONG
We recommend setting up with two people
INSTRUCTIONS
1
2
3
4
7
6
5
know
know
OUR COMMITMENT TO YOU
Here at Playlearn, we have spent many years developing our Bubble Walls and Bubble
Tubes to ensure they are simple to set up and trouble-free, so you can spend more time
enjoying it and less time setting it up. We want you to love your Bubble Tube, so please
let us know if any questions come up. Please email us at [e-mail] and we
will get back to you within 48 hours. The Bubble Tube is a delicate product and must
be looked after and maintained to get optimal use. Any time maintenance is required
(and certainly for emptying the water!), we recommend that two people do this together.
Wash fish and balls with dishwashing liquid in warm water and rinse
off in cold water, making sure all soap is removed.

EMPTYING WATER FOR MAINTENANCE AND STORAGE
We have provided a maintenance hose to aid in emptying your Playlearn Bubble
Tube. Attach the water pipe to the nozzle closer to the handle on the manual pump
and place the other end of the pipe deep into the panel. Place a large bucket on
the floor (or at a lower point than the end of the pipe) and start pumping until the
water starts flowing.
8
9
know
know
REMOTE
The remote operates the following way:
Power Turns the product on and off
Play/Pause Turns the light on and off
Brightness Adjusts the brightness of the light
Colors Changes the light to button color
Auto Light will gradually change between all colors
Jump 3/Jump 7 Light will jump between red, green and blue /
Light will jump between all 7 colors
Fade 3/Fade 7 Light will fade between red, green and blue /
Light will fade between all 7 colors
Flash Light will flash on and off
Speed +/- Increases/decreases speed of the light changing
See next page for app instructions.
10
Place fish in Bubble Tube and place the silver cap on top.
It may take a few hours for the translucent balls to fully circulate.
Slide both brackets onto the tube, we recommend one bracket
on the top and one at the base.
Anchor brackets to wall and tighten bracket screws for stability.
Place lid on Bubble Tube and enjoy!
11
12

If your Bubble Tube is cracked, please contact customer support
NO BUBBLES COMING OUT If the pump is not making noise and the lights are not
not working, please check that you have completed the set up instructions. If the
connection is correct, but the pump still isn’t making noise, please contact customer
support.
REMOTE CONTROL NOT FUNCTIONING The remote control is designed to change
the colors of the lights and to change the light pattern. If the lights are on but they are
not changing with the click of the remote control, try going a little closer to the base of
the Bubble Tube. The red LED light turning on doesn’t mean there is a good battery.
If it still does not work, please change the battery. If this fails to fix the problem, contact
customer support for a replacement.
NO POWER First, touch the adaptor and see if it feels warm. If it is cold, contact
customer support for a new adaptor. If the adaptor is warm, check the connection
into base by removing and reinserting it and press the
“on” button on the remote control. If this still does not resolve the problem, please
contact customer support.
CAUTION Always unplug the power before cleaning and handling. Disconnect and
drain the water if storing away for an extended period of time. Do not operate with hot
or ice-cold water. Do not lift, carry or pull the Bubble Tube by the power cord. Do not
exceed the maximum voltage and wattage on adaptor.
STILL STUCK ?Confused? Any further questions? Please contact customer support and
one of our reps or techs would be happy to walk you through it.
grow 845-362-0638 [e-mail]
CRACKED PANEL
immediately.
The brackets are designed to keep your bubble tube safe from knocks and
accidental spills. The brackets are not strong enough to prevent strong tugging
on the tube or force applied to the brackets. We supply screws and anchors with
this product, but they may not be suitable for all wall types. The brackets must be
installed by a professional and the correct screws and plugs used depending on
the wall.
IMPORTANT NOTE

WARRANTY INFORMATION Thank you for choosing Playlearn’s Bubble Tube. All of our
products are made with the highest quality materials. In the event that a product
does not have our usual standard of excellence, we will repair or replace it, at our
discretion, within 12 months from the date of purchase. A valid proof of purchase,
with the purchase date clearly indicated, must be provided. Photos of defective
merchandise may also be required to help us evaluate the cause of the defect.
WATER DAMAGE This product is not manufactured to withstand extreme
temperatures. Improper storage that allows water to freeze within the Bubble
Tube will cause damage and is not covered under the warranty. The use of
“hard water” and/or caustic cleaners can affect the finish of the Bubble Tube.
Failure to keep the unit clean, and use of additives/cleaners, will also void the
warranty.
NOT COVERED UNDER THE WARRANTY The warranty will NOT cover cases of
damage due to: inadequate care, immersion in water or improper installation,
storage or maintenance.
This warranty also does not cover any additional charges or installation, removal,
disposal, shipping costs or consequential damage associated with any warranty
claim.
SETTING UP THE APP
Search your phone’s app store for “Playlearn”.*
Make sure your Bluetooth is “on”. Download and open the app.
Press the menu icon on the top left corner.
Press “my devices” and select the device listed in drop down until the connected link icon.
Your Bubble Tube must be turned “on” to establish a connection to the app.
*The release date of the app on Apple and Android is October 1st, 2019.

Playlearn Light Up Chair
Playlearn Light Up Bench
Enjoy!
Continue your Playlearn experience
Interactive Liquid Tiles
Playlearn Water Bead Wall
Playlearn Bubble Tube
Playlearn Bubble Wall
P
l
a
y
l
e
a
r
n
F
o
a
m
B
r
i
c
k
s
Playlearn LED Furniture
Playlearn LED
Night Light