PlayStation Virtua Tennis 3 Manual

Network Setup
© 2009 Sony Computer Entertainment America Inc.
"PlayStation", "PLAYSTATION" and "PS" Family logo
are registered trademarks of
Sony Computer Entertainment Inc.
v 1.0
Network Setup for PLAYSTATION®3 System
Wired or Wireless Cable Connection (Using a Router)

Network Setup
© 2009 Sony Computer Entertainment America Inc. "PlayStation", "PLAYSTATION" and "PS" Family logo are registered trademarks of Sony Computer Entertainment Inc. p. 2
To connect your PLAYSTATION®3 system to the Internet using Cable and a router, follow the
instructions below. This is a companion guide to the PS3™system Network Setup online interactive tutorial.
If you need instructions for DSL or for a cable connection without a router, please visit http://us.playstation.com/support
1Make sure that your PS3 system is turned off and unplugged from the wall.
2Position your PS3 system so you can clearly see the back panel connections.
3Power down your cable modem at this time. Contact your Internet Service Provider (ISP) if you
need assistance in setting up or using your cable modem. (Cable modem is not included with PS3 system).
4Click on the router. This guide covers cable connections to the PS3 system using a router.
If you would like to connect without using a router, download the appropriate guide from
http://us.playstation.com/support
1
2
3
4

Network Setup
© 2009 Sony Computer Entertainment America Inc. "PlayStation", "PLAYSTATION" and "PS" Family logo are registered trademarks of Sony Computer Entertainment Inc. p. 3
5Choose how you will connect from the router to
your PS3 system: Wired or Wireless.
Not all modems have wireless capability. If you’re not sure,
try the instructions below for a wired connection.
Wired - Proceed to Step 6
Wireless - Skip to Step 10
5
6 To make a wired connection from the cable modem to the
router and then to your your PS3 system, you will need
two Ethernet cables. Each end of these cables
should look like the image shown here. >>>
Unlike a phone cord, Ethernet cables:
 -Areusuallyrounded(notat)
- Have eight tiny slots on each end (not four)
- May have the words “CAT 5” on the cable

7Look at the back of your modem for a connection port
that looks like the image shown here. >>>
Connect one end of an Ethernet cable into this port.
8 On the back of the router, look for a set of
connection ports like the image shown here. >>>
Typically, you will see a port on one end labeled
0(zero), WAN or WLAN. Insert the remaining
end of the Ethernet cable coming from the
modem into this port. The remaining ports are
usually labeled 1 through 4. Connect one end of
the second Ethernet cable into an available port.
9On the back of your PS3 there is a similar port
that looks like the image shown here. >>>
Insert the other end of the Ethernet cable into this port.
10 Locate the power cord and insert the end shown here >>>
into the PS3 system.
11 Once everything is hooked up, you can plug the other end
of the power cord into the wall.
WARNING: Do not plug PS3 into a power source until all other connections are complete!

Network Setup
© 2009 Sony Computer Entertainment America Inc. "PlayStation", "PLAYSTATION" and "PS" Family logo are registered trademarks of Sony Computer Entertainment Inc. p. 4
12 Make sure that your modem is plugged in and has been turned on for
at least two minutes. Contact your Internet Service Provider (ISP) if you need assistance
in setting up or using your modem.
 Then,iptheMain Power Switch located on the back panel of your PS3 system
to the ON position. The ON position is indicated by a bar on the switch.
12
13 Turn your PS3 system on by either touching the power button on the front, or by
pressing the PS button on your controller. Controller must be charged before use.
13
The power light will
change from red
to green and your
PS3 system will beep.
When there is a disc
inside, you will also
see a blue light.
Now you’re ready
tocongureyour
Network Settings.
Please visit :
http://us.playstation.com/support
for more information.