Plinius INSPIRE 880 User manual

The heart of music
www.pliniusaudio.com
INSPIRE
880/980 Integrated Amplifier
Instruction Manual

Contents
Introduction ...............................................................................................................2
Unpacking ....................................................................................................................3
Placement & Ventilation ....................................................................................3
Care & Maintenance............................................................................................4
Precautions ................................................................................................................5
Front Panel Functions ........................................................................................6
Rear Panel Functions .........................................................................................7
Remote Control Functions .............................................................................10
Installation & Operation ....................................................................................12
Product Features ..................................................................................................16
Loudspeaker Selection .....................................................................................17
Troubleshooting .......................................................................................................18
Specifications ..........................................................................................................19
Index ................................................................................................................................20
All operational, technical and descriptive material in this publication
is subject to change at any time without notice. For further product
information or queries, please contact your Plinius dealer.
Plinius products are designed and manufactured by
Plinius Audio Limited, New Zealand.

2
PLINIUS INSPIRE
Introduction
Congratulations on your decision to become the proud owner of this
Plinius Inspire Integrated Amplifier.
This manual has been prepared to help you understand the operation of your amplifier,
and to provide information about its design and the variety of ways it may be used.
We have designed and manufactured this amplifier to reproduce your favourite music
faithfully and accurately. With a little care and a full understanding of the operating
recommendations in this manual, your Plinius Inspire Integrated Amplifier will provide
years of high-quality, trouble-free performance.
Please take the time to read this manual thoroughly before using your amplifier.
SERIAL NUMBER
FINAL TEST CERTIFIED BY

3
INTEGRATED AMPLIFIER
Unpacking
Open the box from the top and remove the accessories and the top foam. You
may now proceed to lift the unit from the box. Retain the packaging for future
transportation of this unit.
Placement & Ventilation
This Plinius product may operate at a moderately high temperature, especially during
extended listening sessions. With this in mind, we recommend the following guidelines
for placement and ventilation:
• The ideal location is upon a rigid stand, away from direct contact with any
temperature sensitive materials, furniture or deep pile carpets.
• Ventilation through and around the amplifier should be kept unimpeded.
• Ensure heat vents (slots in the base and lid) are not covered or restricted in any way.
• Equipment racks should be of an open type with no closed side panels and no
closed front or rear panels. Ensure a minimum of 100mm clearance on all sides of
your Plinius unit to other equipment and the shelf above.
• If the unit is in an enclosed cabinet, the clearance should be greater than 400mm
on all sides. Ensure the space between the chassis and shelf below the unit is
unobstructed at all times.
• When stacking separate audio components, ensure a minimum of 400mm
clearance above the top unit is maintained for suitable airflow.
• NOTE: This unit has been designed for use in moderate climates only, not for tropical
conditions.
The design of this Plinius product incorporates a very high level of mechanical
decoupling of the input and output. It can however still be influenced by acoustical
feedback in the operating environment. The use of acoustic cones or a suitably
spiked amplifier stand or table may further enhance the performance of this amplifier.
Consult your Plinius dealer for further advice if required.

4
PLINIUS INSPIRE
Care & Maintenance
With simple care and maintenance your Plinius product can be kept looking and
operating like new for many years to come.
MAINTAINING THE CONNECTORS
Exposed connectors such as the RCA connectors will be subject to environmental
factors, and over time the surface may degrade. This can be greatly reduced by fitting
readily available ‘RCA caps’ to reduce the effects of environmental elements on the RCA
connectors. These RCA caps or RCA shorting caps can also provide sonic benefits.
Connector cleaning products are also available to clean the RCA and cable connectors
and frequent checks and cleaning will help maintain a good signal connection.
NOTE: DO NOT use RCA shorting caps on output connectors or power amplifier input
connectors. Use RCA shorting caps on unused preamplifier stage input connectors only.
Standard RCA shielding caps can be used on any unused input or output connectors.
MAINTAINING THE SWITCHES
Switches should be maintained by using each various switch setting periodically.
Even if a switch or a switch setting is not used, it is a good idea to toggle small
switches and turn rotary switches though the full range of the switch several times in
succession to keep the contacts active. Performing this simple action will promote
longevity of the switch contacts.
SURFACE CLEANING
From time to time you may wish to clean the surface of your Plinius equipment to
remove dust, or any material build up from the atmosphere or on commonly used
controls. Your Plinius product is made up of parts that have a hard anodised or a
powder coat finish and will clean easily without being damaged.
Cleaning should be carried out using a soft cleaning cloth, dry or with either a small
amount of water or a very mild surface cleaner, while observing the following guidelines:
• As a safety precaution, always switch the equipment off prior to cleaning
• Always use a cloth that is soft and clean
• Never use abrasives or polishing compounds anywhere on the unit
• Never apply liquid directly to the surface of the unit
• Use the cloth dry or with mild surface cleaners of either liquid or foaming type
• Apply only small amounts of cleaner to the cloth
• DO NOT rub the surface but wipe clean only. Excessive rubbing may dull powder
coat or wear the screen printed text.

5
INTEGRATED AMPLIFIER
Precautions
PLEASE TAKE SPECIAL NOTE OF THE FOLLOWING PRECAUTIONS
BEFORE OPERATING YOUR NEW AMPLIFIER.
• The Plinius Inspire Integrated Amplifier can deliver in excess of 80 watts into 8
ohms. This amplifier is also capable of a very large peak current delivery.
• The Plinius Inspire Integrated Amplifier operates in Class AB. It is capable of
generating heat that could have an adverse effect on other electronic equipment,
furniture, etc.
• DO NOT leave flammable material on the amplifier whilst running, as this could
pose a serious fire risk.
• This amplifier operates at hazardous voltage levels. There are some alterations
that may be made by you, the owner. However, we recommend that any work
requiring removal of the lid be referred to a suitably qualified and experienced
service technician.
• DO NOT attempt to connect any input of this amplifier to its own outputs.
• DO NOT earth any output terminal or connect any of these terminals together
without following the instructions in this manual or seeking qualified assistance.
• DO NOT place this amplifier in any position where liquids, or any foreign material
may accidentally enter it.
• DO NOT connect any voltage source, short circuit, earth/ground or appliance
(other than suitable high fidelity loudspeakers) to the amplifier output terminals.
• DO NOT expose the unit to dripping or splashing.
• DO NOT place objects filled with liquids on the unit, e.g. vases.
• DO NOT place sources of naked flame on the unit, e.g. candles.

6PLINIUS INSPIRE
Front Panel Functions
The front of the Plinius Inspire Integrated Amplifier incorporates all the facilities you will
require on a daily basis.
1. DISPLAY LED
The blue LED on the front panel indicates the mode of operation. When fi rst switched
on the unit will go into standby and the display LED will vary in brightness. When the unit
is taken out of standby and is ready for use, the LED will remain lit. Whenever mute or a
remote volume button is pressed, the LED will dim.
2. SOURCE SELECTION BUTTONS
The next source and previous source buttons on the front panel allow selection of any
of the different inputs available on the rear panel. This selection is fed to the speaker
outputs of the amplifier.
3. SOURCE DISPLAY LEDS
These small white LEDs communicate the current source selection.
4. VOLUME CONTROL KNOB
The volume control is a motorised unit that will accurately convey the selected
source signal to the line stage of the Plinius Inspire Integrated Amplifier. When using
the remote control to alter the volume level, briefly press the button to make small
adjustments, or hold the button down to continuously adjust the volume.
4
1
2
3

7INTEGRATED AMPLIFIER
Rear Panel Functions
This panel incorporates all terminals for connecting the input signals from your CD player,
tuner, etc and the outputs to the loudspeakers and mains supply. Please remember that
your Plinius Inspire Integrated Amplifi er is a high quality electronic instrument capable
of an exceptional level of performance. Be sure that you understand your system’s
requirements fully before you make any connection to this amplifi er.
1. MAINS SWITCH
The heavy-duty rocker switch in the centre of the panel turns the Mains/Line Power to
the amplifi er ON or OFF. The amplifi er draws a moderately high current when switched
on, so it is not good practice to rapidly turn the Mains switch on and off repeatedly.
2. PHONO INPUT TERMINALS
The phono inputs for your Plinius Inspire Integrated Amplifier are suitable only for low
level input from phono turntables fitted with a Moving Magnet (MM) type cartridge. The
loading is fixed at 47K ohms. Consult your Plinius dealer for further advice if required.
3. CD XLR INPUT TERMINALS
A set of ‘line level’ XLR balanced inputs for use with source components that feature
XLR balanced outputs. Balanced signals are carried via a three way cable.
The XLR pin configuration used in all Plinius product is:
PIN 1 to GND
PIN 2 to +Signal
PIN 3 to -Signal
NOTE: Because of the way our XLR and balanced inputs are configured it is not
possible to use both XLR and RCA at the same time.
1
9
2
3
710
11
12
13 7
4
5
8
6

8
PLINIUS INSPIRE
4. ANALOGUE LINE INPUT
Two line input terminals for your Plinius Inspire Integrated Amplifier are easily
accessible along the rear panel, with the right channel (red) inputs along the top.
These are ‘line level’ inputs, for use with unbalanced signals from line level source
components such as CD players, tuners, etc. Consult your Plinius dealer for further
advice if required.
5. OPTICAL INPUTS
Two optical inputs are available for connection via an optical or ‘TOSLINK’ cable from
sources with an optical output.
6. USB INPUT
A USB Type B input is available for connection from a computer audio source with USB
output. NOTE: Plinius USB drivers must be downloaded and installed on a Windows
based computer before the USB input can be used. These drivers are available from
www.pliniusaudio.com. Apple computers with MacOS do not require USB drivers.
7. OUTPUT TERMINALS
Connections for the loudspeakers are provided on either side of the rear panel. Two
parallel pairs of five way binding posts for each channel are fitted – these provide
ease of use with bi-wiring and multiple cables requiring a large contact area.
8. GROUND LIFT SWITCH
This switch allows the signal ground to be disconnected from the chassis. In some
installations a hum loop may exist due to duplicate ground paths from different
equipment. Use this switch to remove the connection from 0V to ground thus
allowing some flexibility in your particular set-up.
9. MAINS POWER CORD IEC SOCKET
This connector is where the mains supply cable from your wall connects to the
amplifier. You will notice that a fuse holder is mounted within this connection, and it
holds a mains fuse to provide surge and overload protection for your amplifier.
10. PHONO EARTH POST
This is a chassis connected gold-plated earth post for use with most vinyl turntables.
11. NETWORK INPUT (INSPIRE 980 ONLY)
The Inspire 980 includes a network input socket for wired connection to a home
network or network audio system.
12. WI-FI INPUT (INSPIRE 980 ONLY)
The Inspire 980 includes a Wi-Fi antenna for wireless connection to a home network or
network audio system.

9
INTEGRATED AMPLIFIER
NOTE: Wireless/Wired mode is detected at power on. If a network cable is connected
when the amplifier is switched on, wireless mode cannot be used. To use wireless
mode the amplifier must be switched off, the cable must be removed and then the
amplifier switched on.
13. WPS BUTTON (INSPIRE 980 ONLY)
The WPS button is used to establish a link between the Wi-Fi antenna of the 980 and
your home network or network audio system.
IMPORTANT: Some routers or network devices may reset the password. Consult the
manual of your router or network device to see how this connection is made and to
prevent the password from changing.

10 PLINIUS INSPIRE
Remote Control Functions
The Plinius Inspire Integrated Amplifi er features a full function
remote to control all settings and confi gurations of the amplifi er as
well as complete controls for operating your Plinius CD player.
INTEGRATED AMPLIFIER REMOTE FUNCTIONS:
1. STANDBY
Standby is used to put the unit into a low power mode. This
disconnects the outputs of the integrated amplifier and turns off
the white display LED’s. It also switches the integrated amplifier
to a low bias mode to reduce power consumption and still
keep the circuitry active. This allows a minimum warm up period
before the Plinius Inspire Integrated Amplifier is at it’s sonic best.
2. DISPLAY
The display button on the remote enables you to adjust the
display brightness of the white LED’s. Pressing the display button
repeatedly will dim the LED in steps until they are off. The next
press of the button will cycle the display back to full brightness.
3. HT BYPASS
The HT Bypass button activates the Plinius Integrated Amplifier
home theatre bypass mode. Once activated, the preamplifier is bypassed and the
signal is transmitted from the HT Bypass input directly to the power amplifier. NOTE: In
HT Bypass mode the only buttons that continue to function are Standby and Display.
More information on HT Bypass can be found in the Installation & Operation section in
this manual. (Not applicable to Inspire Amplifiers)
4. PHASE
The phase of the output signal from the preamplifi er is toggled from absolute to
inverted 180 degrees with each press of this button. (Not applicable to Inspire Amplifi ers)
5. SOURCE SELECTION
The source selection buttons enable changing from one input to another when needed
and can be scrolled left or right to select the desired source. On reaching the left most
or right most input, the selection will scroll in a continuous loop with the next button press.
6. VOLUME CONTROL
Use these two buttons to control the volume level of the integrated amplifier. The
right side button increases volume, while the left side button decreases the volume.
2
4
5
6
7
9
10
11
13
1
3
5
6
8
10
11
12

11
INTEGRATED AMPLIFIER
Briefly press either button to make fine adjustments to the volume level. Hold down
either button to continually adjust the volume level.
7. MUTE
Pressing this button toggles the Inspire Integrated Amplifier in and out of mute.
CD PLAYER REMOTE FUNCTIONS:
8. REPEAT
The repeat LED on the front panel will illuminate once this button is pressed. The CD
Player will play all tracks on the CD as normal, but then repeat all tracks from track 1 in
an endless loop. It does not repeat one track only, but will repeat the entire contents
on the CD.
9. DISPLAY
This function enables you to quickly adjust the display brightness. Use this button
to toggle between high, low, and off settings. Note that whenever the compact disc
drawer is ejected to change a CD, the display will automatically revert to full brightness.
10. CUE BUTTONS
Use these two buttons to cue through the track you are listening to. Press and hold
the right side button to cue forward through the track, or press and hold the left side
button to cue backwards through the track. Once the start or end of the track is
reached, Cue will continue into the next track.
11. TRACK BUTTONS
The track buttons enable you to move forward (right button) or back (left button) through
the tracks on the CD. Press the button once to skip to the next track on the CD, or hold
down to skip through multiple tracks. When you press the back button once the CD
Player will revert to the start of the current track. Pressing the back button again will
skip back to the previous track. The track currently selected will be brightly lit.
12. STOP/EJECT
If the CD player is playing a CD, pressing the Stop/Eject button will stop play and
return to track 1. Pressing the button again will open the compact disc drawer so the
CD can be changed.
13. PLAY/PAUSE
Press the Play/Pause button to begin playing the CD at the track selected. The
display LED corresponding to the track that is being played will vary in brightness.
Press the Play button again, and the track will pause, designated by the LED flashing.
If the compact disc drawer is open, pressing play will shut the drawer and start
playing the CD from track 1.

12 PLINIUS INSPIRE
Installation & Operation
WARNING: RISK OF ELECTRIC SHOCK. TERMINALS MARKED WITH
SHOULD BE CONSIDERED HAZARDOUS LIVE AT ALL TIMES.
This amplifier operates at hazardous voltage levels. We recommend that any work
requiring removal of the lid be referred to a suitably qualified and experienced service
technician. DO NOT place this amplifier in any position where liquids or any foreign
material may accidentally enter it.
PLEASE READ & UNDERSTAND THE PRECAUTIONS WITHIN THIS MANUAL
FOR PLACEMENT & OPERATION OF THIS PRODUCT.
CONNECTIONS
Connections to your Inspire Integrated Amplifier should be made in the same order
as they are listed in this section. DO NOT attempt to connect your Inspire Integrated
Amplifier until you have read and fully understood these instructions. Should you
require further assistance, please contact your Plinius dealer.
DO NOT POWER UP YOUR AMPLIFIER UNTIL YOU HAVE CONNECTED
YOUR INPUT/OUTPUTS CORRECTLY FOR YOUR SYSTEM.
SOURCE COMPONENT INPUTS
Connect your Source to the input of the Inspire Integrated Amplifier using suitable
single-ended RCA or Balanced XLR interconnect cables only. For RCA, make sure
you connect the red coded cable to the red RIGHT RCA input, and the white cable to
the white LEFT RCA input. Also make sure the RCA connectors are a snug fit and are
inserted all the way in.
For CD XLR input connection, make sure you connect the RIGHT XLR input and LEFT
XLR inputs to the right and left outputs from your source respectively. Also make sure
the XLR connectors click into place. Use the input selection switch to select RCA if
you are using RCA inputs or to select XLR if you are using XLR inputs.
NOTE: The phono input should be connected to a suitable source turntable only.
CD PLAYER INSPIRE CD INPUTS

13INTEGRATED AMPLIFIER
LOUDSPEAKER OUTPUTS
The connection of your loudspeakers to the output posts of the Inspire Integrated
Amplifier must be made by an ‘instructed person’ with suitable ready made
loudspeaker cables only. Connect your left loudspeaker (ie. the one on your left
when seated in your normal listening position) to the left output terminals. Ensure
the terminals on the amplifier are connected to the loudspeaker terminals Red
positive (+) to Red positive (+) and Black negative (–) to Black negative (–). Repeat
this process for the right outputs.
TERMINATION QUALITY
Quality of the connections must be examined to ensure that high-performance,
trouble-free operation is enjoyed. Check that the connections are tight but do not
over tighten. If bare wires are used make sure that no loose strands of wire short
across the other terminals or the amplifier chassis. When using plugs such as
bananas, be sure to use good quality plugs with a firm fit.
PHASING (OR POLARITY)
It is important to achieve good stereo imaging in your listening room. By observing
the wiring instructions above, each power amplifier/loudspeaker combination should
be in phase. If you experience poor stereo image and/or a lack of bass, check that
the loudspeaker wiring has been connected correctly. If in doubt, consult your Plinius
dealer for advice.
Naturally it is also important to make sure all the leads carrying signals for the RIGHT channel
loudspeaker are connected to the RIGHT input to the amplifi er from your preamplifi er or
CD player etc. Signals for the LEFT channel should be wired in a similar fashion.
USING USB INPUT
The Inspire Integrated Amplifier features a USB Type B input for digital audio from a
computer source. Before use, Plinius USB drivers must be downloaded and installed
on any Windows based computer intended for playing the digital audio. These drivers
are available from www.pliniusaudio.com. Apple computers with MacOS do not require
USB drivers.
+ RIGHT – OUTPUTS – LEFT +RIGHT SPEAKER LEFT SPEAKER

14
PLINIUS INSPIRE
Connect the Source computer, Laptop or other device to the Inpsire amplifier using
USB Type A to USB Type B cable. Select the USB input on the Inspire amplifier. Open the
audio settings of the computer and select ‘XMOS USB Audio 2.0’ as the audio output.
NOTE: Setting this as the ‘default audio output’ will ensure it is selected automatically
whenever the Inspire Integrated is connected and out of standby.
After the steps above are performed, launch the media player (iTunes, Windows Media
Player, VLC etc). Playback will now be output over USB to the Inspire amplifier. Consult
your Plinius dealer for further advice if required.
NOTE: The USB input can be used as an external soundcard for a computer USB
output. It cannot be used to play files directly from a mass storage drive.
USING NETWORK INPUT (INSPIRE 980 ONLY)
The Inspire 980 features a Network input socket for digital audio. The benefits of using
Network connection include wireless control, longer cable capabilities and higher
data transfer rates.
Connect the Inspire 980 to your home network router with a suitable network cable.
Install media server software on your computer or Network Attached Storage (NAS)
drive to manage the controller interface. Plinius recommend AssetUPnP or Twonky as
server software.
NOTE: Ensure the server software is set with the location of your music library files.
Use an appropriate controller such as Plinius Arataki for iPad to connected wirelessly to
your home network and select the source library as the server and Inspire 980 as the
player. Use the controller to select files, create playlists and control playback of the music.
See www.pliniusaudio.com or consult your Plinius dealer for further advice if required.
USING WI-FI INPUT (INSPIRE 980 ONLY)
The Inspire 980 features a wireless antenna for connection to the network. This wireless
connection can be used in place of a cable between the router and the Inspire 980.
NOTE: Wireless/Wired mode is detected at power on. If a network cable is connected
when the amplifier is switched on, wireless mode cannot be used. To use wireless
mode the amplifier must be switched off, the cable must be removed and then the
amplifier switched on.
Use an appropriate controller such as Plinius Arataki for iPad to connected wirelessly to
your home network and select the source library as the server and Inspire 980 as the
player. Use the controller to select files, create playlists and control playback of the music.
See www.pliniusaudio.com or consult your Plinius dealer for further advice if required.

15
INTEGRATED AMPLIFIER
USING WPS TO SET UP WI-FI INPUT (INSPIRE 980 ONLY)
Press the WPS button on the router as per the manufacturer’s instructions. The router
should indicate when it is ready to connect. Next, press the WPS button on the Inspire
980. After a short time, the router should confirm the two devices are now connected.
Music can now be streamed between the two devices, replacing the need for a
physical cable.
IMPORTANT: Some routers will reset the password (passphrase or pre-shared key) when
using the WPS function. Check the documentation that came with the router to ensure
that other devices on your network can still connect after using the WPS button.
CONNECTING THE MAINS SUPPLY
Firstly, check that the mains supply voltage printed on the rear of this amplifier is
similar to the mains supply voltage in your area. If in doubt, please consult your
Plinius dealer. Mains supply power connection is via the plug-in lead supplied with
your Inspire Integrated Amplifier. Where possible, check the wall outlet is switched
OFF, then connect the local mains plug end of the lead to the wall outlet. Check the
integrated amplifier is switched OFF, and connect the IEC end of the cable to the IEC
socket at the back of the integrated amplifier. With the cord fully connected, switch
the wall outlet ON.
Now that your Inspire Integrated Amplifier is configured correctly, switch the
power switch on the rear panel to ON. The display LED will cycle in brightness for
approximately ten seconds as the internal circuitry stabilises. You can now enjoy your
new Plinius Inspire Integrated Amplifier.
NOTE: This unit must be connected to a mains socket outlet with a protective earthing
connection. The wall outlet socket or mains switch must be accessible at all times in
case of emergency.
WARM-UP PERIOD
You will find that the Inspire Integrated Amplifier will become noticeably ‘purer’ in
sound after being on for a period of time. We usually recommend waiting at least 24
hours before expecting the best quality of sound reproduction from your amplifier.

16
PLINIUS INSPIRE
Product Features
REMOTE CONTROL
Provided with your Inspire Integrated Amplifier is a 16 function remote control. Two
AAA batteries power the remote, and these are replaced by removing the two screws
on the base of the remote that hold the battery compartment in place. The bottom
end of the remote is now free to slide out for access to the batteries. Replace the two
batteries, taking care to refit the new ones with correct polarity.
MAINS/LINE FUSE
A Mains/Line fuse is fitted within the IEC socket on the rear of the amplifier. A small
drawer at the bottom of this socket may be removed (after the IEC plug is removed)
by levering it out with a flat blade screwdriver. The fuse fitted should be rated as
specified on the rear panel.
IMPORTANT: DO NOT FIT A FUSE WITH A HIGHER RATING.
In the unusual event that this fuse should blow, you must first establish the cause of
this failure (such as power surges, damaged mains cable, etc) before replacing the
fuse with one of the same rating and type. Should the amplifier continue to suffer
mains fuse failure, contact your Plinius dealer.
OVER TEMPERATURE PROTECTION
The Inspire Integrated Amplifier is fitted with an auto-reset thermal sensor. The sensor
is located behind the front panel and will place the unit into an error mode if the
internal temperature reaches 60°C (140°F).
If Over Temperature Protection occurs you should switch the unit off immediately. Check
the placement of the unit and ensure there is adequate airflow above and around the
unit. Refer to the Placement & Ventilation section on page 4 for further information.
SIGNAL ERROR PROTECTION
The Inspire Integrated Amplifier contains circuitry for detecting signal errors such
as signal clipping (overdrive), DC voltage and high current. Should one of these
errors occur, the unit will go into an error mode and disconnect the source and the
speakers. The unit will remain in error mode until the error is resolved.
The power must also be switched off to reset the error detection. When you are
confident the reason for the error has been resolved, switch the unit back on. Should
the amplifier continue to show repeated error mode, contact your Plinius dealer.

17
INTEGRATED AMPLIFIER
Loudspeaker Selection
Your Plinius Inspire Integrated Amplifier is designed for use with high fidelity
loudspeakers. It should not be used to operate with any other type of appliance or
equipment.
Be certain that your loudspeakers can handle most of the rated output power of this
amplifier. You may find loudspeaker specifications confusing or misleading, so you
should discuss this with your audio dealer prior to purchase. As a general rule, the
use of high power (200 Watt RMS or greater) loudspeakers is recommended and
desirable. However, our experience indicates that medium to low power loudspeakers
(100 to 200 Watt RMS) are quite often suitable for use on this amplifier, provided the
volume is maintained at a level where no distortion is audible.
Impedance of the loudspeaker load is important to ensure the rated performance
of this amplifier. If you have doubts about the impedance of your loudspeaker
configuration, we recommend you speak to your Plinius dealer.

18
PLINIUS INSPIRE
Troubleshooting
NO SOUND FROM THE UNIT
If the unit is not reproducing audio take the following steps:
• Check the source is correctly connected to an appropriate input on the unit.
Refer to the Installation & Operation section on page 12.
• Check the source is playing, and not paused or muted. If it has adjustable
volume, check this is at the usual output level.
• Check the unit is set to select the correct source input. Adjust the source
selector for the correct source component.
• Check the volume. Turn the unit volume up to a point just below the normal
listening level. DO NOT turn the volume up to maximum in case the sound begins
to come through the speakers.
• Check the unit is not in Mute. If the Display LED is dim, this indicates the unit is in
Mute mode. The Display LED should be full brightness for operational mode.
SOUND IS QUIET OR DISTORTED
If the sound is quiet or distorted an internal fuse may have failed. If you suspect a
fuse has failed, contact your Plinius dealer.
NOTE: If the unit immediately or repeatedly suffers rail fuse failure, there may be a
major problem and you should contact your Plinius dealer.
POWER FAILURE
The unit may have suffered mains fuse failure or be in thermal overload protection mode.
• Mains Fuse Failure: Check the mains fuse and replace if needed.
• Thermal Overload Protection: Assess the temperature of the unit. If the unit seems
excessively hot, the Over Temperature Protection may have activated.
Refer to the Product Features section on page 16 for further information.
NOTE: If the unit immediately or repeatedly suffers mains fuse failure or thermal overload
protection, there may be a major problem and you should contact your Plinius dealer.